%
- Coffee storage bin capacity 2 kg.- Dosing from 5 to 12 grams.- Grinder Ø 60 mm.- Duration of continuous use 30 min.- Protection level IP 21.Note: acoustic level (80 dB).
%
- Air condenser.- Multifunctional pastoturbine for mixing, heating, pasteurizing, cooling and lashing all creams, sauces and mixes. - Adjustable times and temperatures. - Intuitive and easy to use "Touch Screen" control panel (18 pre-installed cycles: 9 for ice cream, 7 for pastry, 2 for gastronomy) with the possibility of inserting new recipes. - Manual or fully automatic cycle. - Pasteurization and lashing are carried out in a single cylinder, avoiding any handling or transfer. - Vertical...
%
- Air condenser.- Multifunctional pastoturbine for mixing, heating, pasteurizing, cooling and lashing all creams, sauces and mixes. - Adjustable times and temperatures. - Intuitive and easy to use "Touch Screen" control panel (18 pre-installed cycles: 9 for ice cream, 7 for pastry, 2 for gastronomy) with the possibility of inserting new recipes. - Manual or fully automatic cycle. - Pasteurization and lashing are carried out in a single cylinder, avoiding any handling or transfer. - Vertical...
%
Turns/minute: 14000 rpm.Clear Lexan cup (650 cl).Shaft with 3 stainless steel knives, ideal for cocktails and sorbets preparation.
%
- Air condenser.- Vertical turbine with automatic extraction.- Minimum mixing capacity 4 lit. and maximum 8 lit.- Noise level below 70 dB.- Vertical evaporator cylinders for a larger exchange surface.- Cycle with time control or temperature control.- Exclusive distribution device. - System self diagnosis. - Cycle time: 8/12 min. - Hourly production: 60 litres.NB: mainly for cold work.
%
- Air condenser.- Vertical turbine with automatic extraction.- Minimum mixing capacity 4 lit. and maximum 8 lit.- Noise level below 70 dB.- Vertical evaporator cylinders for a larger exchange surface.- Cycle with time control or temperature control.- Exclusive distribution device. - System self diagnosis. - Cycle time: 8/12 min. - Hourly production: 60 litres.NB: mainly for cold work.
%
- Water condenser- Vertical turbine with automatic extraction.- Minimum mixing capacity 4 lit. and maximum 8 lit.- Noise level below 70 dB.- Vertical evaporator cylinders for a larger exchange surface.- Cycle with time control or temperature control.- Exclusive distribution device. - System self diagnosis. - Cycle time: 8/12 min. - Hourly production: 60 litres.NB: mainly for cold work.
%
- Water condenser- Vertical turbine with automatic extraction.- Minimum mixing capacity 4 lit. and maximum 8 lit.- Noise level below 70 dB.- Vertical evaporator cylinders for a larger exchange surface.- Cycle with time control or temperature control.- Exclusive distribution device. - System self diagnosis. - Cycle time: 8/12 min. - Hourly production: 60 litres.NB: mainly for cold work.
%
Version to be posed or suspended.2 UV-A actiniques Tubes 2x 40W.Robust design, chain of fixing included.Safety, which cuts the power supply in case of disassembling of the external protective railings.Safety device in case of accidental water projection.Operational range: 15/18 meters.Protection IPX4, CE normes.
%
Internal dimensions 660x420xh450Standard equipment: 1 grid EN 600x4001 "autoreverse" turbines. Welded room in stainless steel (AISI 304), rounded edges and angles, pressed bottom with draining .Removable carrying-plate structure (75 mm).Chimney for evacuation of the condensate adjustable motorised.Interior lighting.(automatic ignition)Built-in condensate bowl (on the door), connected directly to the discharge.Double glazing door (option: door with hinges on the right), interior window on...
%
Vacuum pump capacity 250m3/h (Busch type).Cycle time 15-30 seconds.Stainless steel cover.Chamber dimensions: 2x 840x830xh250 mm (Sealing length: 4 x 840mm).Working height 900 mm.4 sealing bars (2 per chamber)Digital control panel with 10 programs, maintenance program and pump cleaning.Soft air: gradual vacuuming.On request: gas injection system "nitrogen", ....Professional machines on pedestals.Vacuum is managed in % thanks to the integrated vacuum sensor, no more risk of inadvertent...
%
Included: 2 grids (405x460 mm), with slides4 adjustable stainless steel feet. Monobloc structure, made inside and outside (including the back) of austenitic stainless steel (food-grade), top (40 mm).Embossed interior bottom, with a large maintenance drain plug, rounded corners (smooth), stainless steel racks and slides (anti-tilt).Doors with flush-mounted handles (non-protruding), magnetic seal (easy replacement without tools), hinges with automatic return (locking at 90°).Compressor unit in...
%
Wall-mounted" version with raised rear edgeIncluded: 2 grids (405x460 mm), with slides4 adjustable stainless steel feet. Monobloc structure, made inside and outside (including the back) of austenitic stainless steel (food-grade), top (40 mm).Embossed interior bottom, with a large maintenance drain plug, rounded corners (smooth), stainless steel racks and slides (anti-tilt).Doors with flush-mounted handles (non-protruding), magnetic seal (easy replacement without tools), hinges with automatic...
%
Included: 3 grids (405x460 mm), with slides.4 adjustable stainless steel feet. Monobloc structure, made inside and outside (including the back) of austenitic stainless steel (food-grade), top (40 mm).Embossed interior bottom, with a large maintenance drain plug, rounded corners (smooth), stainless steel racks and slides (anti-tilt).Doors with flush-mounted handles (non-protruding), magnetic seal (easy replacement without tools), hinges with automatic return (locking at 90°).Compressor unit in...
%
Wall-mounted" version with raised rear edge.Included: 3 grids (405x460 mm), with slides.4 adjustable stainless steel feet. Monobloc structure, made inside and outside (including the back) of austenitic stainless steel (food-grade), top (40 mm).Embossed interior bottom, with a large maintenance drain plug, rounded corners (smooth), stainless steel racks and slides (anti-tilt).Doors with flush-mounted handles (non-protruding), magnetic seal (easy replacement without tools), hinges with...
%
7 pairs of slides EN 600x400 per door provided1 evaporator.4 adjustable stainless steel feet. One-piece structure, back, interior and exterior manufactured in (food) stainless steel.Upper top in stainless steel AISI 304 (removable) thickness (40 mm).Stamped interior bottom, with draining tap (high maintenance), rounded angles (without roughness), (adjustable) stainless steel racks and slides in (L) (65-mm spacing).(Reversible) doors with handle (not visible and not salient), magnetic joint...
%
Insulated base include.Display with 3 shelves, sliding doors on service side (2x4).Made in stainless steel AISI 304
%
Insulated base include.Display with 3 shelves, sliding doors on service side (2x4).Made in stainless steel AISI 304
%
2 separate cooking zones Ø 230 mm (2x 3,5 kW). Made of AISI 304 stainless steel, deep-drawn "top" (15/10 mm), levelling cylinders, waterproof "IPX4".Ceramic glass induction hob (6 mm). Focus diameter 230 mm, energy regulator.Principle of INDUCTION: The heat is produced by a magnetic field directly inside the container, this field is created electronically, there is no heating element, which gives it great security. Cooking is done almost without any heat loss; it is the most economical...
%
2 separate cooking zones Ø 230 mm (2x 3,5 kW).Made of AISI 304 stainless steel, deep-drawn "top" (15/10 mm), levelling cylinders, waterproof "IPX4".Ceramic glass induction hob (6 mm). Focus diameter 230 mm, energy regulator.Principle of INDUCTION:The heat is produced by a magnetic field directly inside the container, this field is created electronically, there is no heating element, which gives it great security. Cooking is done almost without any heat loss; it is the most economical...
%
Included: 3 grids (560x542 mm).4 adjustable stainless steel feet. Monoblock structure, inside and outside manufactured in stainless steel (food), the back is in galvanized steel.Stamped inside bottom with draining cap (high maintenance), rounded angles and corners (without bumps), racks and slides (anti-swinging) in stainless steel.Reversible doors (provided for key lock) (lock in option), with built-in handles (not salient), magnetic joint (easy replacement, without tools), hinge with...
%
20 pairs of slides EN 600x400 providedVentilated evaporator.4 adjustable stainless steel feet. One-piece structure, interior and exterior manufactured in (food) stainless steel, back in galvanized steel.Stamped interior bottom, with draining tap (high maintenance), rounded angles and corners (without roughness), (adjustable) stainless steel rack and slides in (L) (65-mm spacing).Reversible doors (predisposition for key lock) with handle (not visible and not salient), magnetic joint (easy...
%
Plate (370x585mm), with 2 cooking zones (2x 2,5kW)Made of AISI 304 stainless steel, "Top stamped" (15/10 mm), adjustable cylindersCooking surface, waterproof "IPX4".Plate (15 mm) in "thermo-diffuser" steel, heated by resistors positioned below.Combustion chamber thermally insulated with glass wool.Control by 8-position switch (each cooking zone), with indicator lightAppliances built in compliance with current standards (CE)
%
20 thermoformed slides EN 600x400 (spacing 65 mm).Temperature + 2 ° + 8 ° C.Refrigerant R600a.Evaporator of the roll bond type, ventilated.Automatic defrost, auto evaporation of condensate.Standard: 5 grids (600x400 mm), adjustable.Monobloc structure, exterior construction in AISI 430 stainless steel, white ABS molded interior, PVC back.Stamped interior bottom, with draining tap (high maintenance), rounded angles and corners.Reversible door with integrated handle (not visible and not...