%
Stainless steel tank and drum AISI 304.Steel base (epoxy paint).Mechanic timer from 0 to 15 minutes.Delivered with bolts for the ground anchor.
%
- Air condenser.- Vertical turbine with automatic extraction. - Minimum mixing capacity 2 litres and maximum 4 litres. - Noise level below 70 dB. - Vertical evaporator cylinders for a larger exchange surface. - Cycle with time control or temperature control. - Exclusive distribution device. - System self diagnosis. - Cycle time: 10/15 min. - Hourly production: 20 litres. NB: mainly for cold work, delivered on wheels.
%
%
Made of stainless steel AISI 304.2 fluorescent tubes with actinic rays (2x 15 W).Low use comparable with 1 lamp of 50 Watt.Voltage 5000 V (grounding when in the case of voltage).Attraction angle 180°, protected surface 100 m2.
%
Made of stainless steel AISI 304.2 fluorescent tubes with actinic rays (2x 15 W).Low use comparable with 1 lamp of 50 Watt.Voltage 5000 V (grounding when in the case of voltage).Attraction angle 360°, protected surface 125 m2.
%
Variable speed (Min. 65 rpm & Max. 551 rpm), with Inverter.Timer from 0 to 30 minutes or continuousStandard accessories: whisk, spatula, hook and 40 L stainless steel tank.High" versions on base.Very robust frame in painted steel (epoxy), upper cover in ABS, 4 lower cylinders for levellingRaising and lowering the tank with lever.Automatic locking of the tank in working position.Protection grid (and screws) in stainless steel, with safety device by microswitch.All parts in contact with the...
%
%
Flow: 7000 m³/h. (with reduced pressure of 300 Pa).1020 r/min.Internal ventilator with double ventilation trench with belt.Produced in galvanized steel,Frame in aluminium profiles.Side inspection possible for After Sales Service .Internal soundproof-isolationEquipped with flexible cuffs against congestion and anti-vibration pads.Motor with 2 closed speeds, degree of protection: IP54 (max. temperature 80°C).
%
Flow rate 7000 m³/H (pressure drop of 300 Pa).1020 rev/min.Internal fan double inlet transmission belt.Galvanized steel execution.Setting in aluminim profile.Indoor sound insulation.Lateral Inspection for S.A.V.Equipped with flexible sleeve to repression and anti-vibration pads.Motor 2 speeds closed, degree of protection IP54 (max temperature 80 ° C.).
%
%
%
Profile frame in aluminium.Panels with isolated double wall.Lateral inspection.Ventilator with belt drive, 2 speed levels.3 double filtering.
%
Profile frame in aluminium.Panels with isolated double wall.Lateral inspection.Ventilator with belt drive, 2 speed levels.3 double filtering.
%
Supplied with one LED lamp (52 Watt). Made of polycarbonate.Conceived for temperatures max. 40°C .Lower hiding place transparent fixed with clips facilitating the dismantling for the maintenance.Protection class IP65
%
Superior top 1,5 mm, rounded edges.Warm ventilated with uniform airflows in order to guarantee a homogenous distribution of the heat.Pressed tank GN-200 mm, corners rounded.Made in stainless steel AISI 304.
%
Tilting head and removable bowl.2 Speeds (Spiral : 1st speed 100 rpm. and 2nd speed 200rpm) & (Tank : 1st speed 10rpm. and 2nd speed 20rpm and timer) with possibility of automatic or manual programming with timer or continuous.Diameter of the spiral 22 mm.Diameter of the tank 452 mm height 260 mm (42 liters) = 38 kg dough.Digital control panel (manual or automatic operation)Frame made of painted steel.Rotating tank in AISI 304 stainless steel.High hardness stainless steel spiral...
%
%
Tilting head and removable bowl.2 Speeds (Spiral : 1st speed 100 rpm. and 2nd speed 200rpm) & (Tank : 1st speed 10rpm. and 2nd speed 20rpm and timer) with possibility of automatic or manual programming with timer or continuous.Diameter of the spiral 24 mm.Diameter of the tank 500 mm height 270 mm (53 liters) = 44 kg dough.Digital control panel (manual or automatic operation)Frame made of painted steel.Rotating tank in AISI 304 stainless steel.High hardness stainless steel spiral...
%
%
8W LEDs. Made of AISI 441 stainless steel.Designed for temperatures max. 40°C .Transparent bottom cover fixed with clips for easy disassembly for maintenance.
%
14W LEDs. Made of AISI 441 stainless steel.Designed for high temperatures (+65°).Transparent bottom cover fixed with clips for easy disassembly for maintenance.
%
25W LEDs Made of AISI 441 stainless steel.Designed for temperatures max. 40°C .Transparent bottom cover fixed with clips for easy disassembly for maintenance.
%
25W LEDs. Made of AISI 441 stainless steel.Designed for temperatures max. 40°C .Transparent bottom cover fixed with clips for easy disassembly for maintenance.
%
25W LEDs. Made of AISI 441 stainless steel.Designed for temperatures max. 40°C .Transparent bottom cover fixed with clips for easy disassembly for maintenance.