%
Stainless steel tank and drum AISI 304.Steel base (epoxy paint).Mechanic timer from 0 to 15 minutes.Delivered with bolts for the ground anchor.
%
- Anti-balance control, delivered standard with base for ground anchor. - With "touch screen" (7") embedded computer, multilingual, 200 memory programs (8 programmed from factory). - Super spin-drying 1000 turns/min. (factor-G 300). - Stainless steel tank and basket AISI 304. - Residual humidity 50 %. - Connection cold or hot water. - Upper basin with 3 compartments for washing products_backup_1_1. - Emergency stop button, "Hot shot" kind.- Designed in stainless steel AISI304.PLUS: machines...
%
Tank GN 1/3, delivered with 6 specific baskets, numbered.Thermal lateral handles and stainless steel lid.Heatng resistance, except for tank (standard bain-marie).On/Off switch and thermostat from 0 to 100°C, with limiting device.
%
Made of stainless steel AISI 304.2 fluorescent tubes with actinic rays (2x 15 W).Low use comparable with 1 lamp of 50 Watt.Voltage 5000 V (grounding when in the case of voltage).Attraction angle 180°, protected surface 100 m2.
%
Made of stainless steel AISI 304.2 fluorescent tubes with actinic rays (2x 15 W).Low use comparable with 1 lamp of 50 Watt.Voltage 5000 V (grounding when in the case of voltage).Attraction angle 360°, protected surface 125 m2.
%
- Air condenser.- Vertical turbine with automatic extraction, low maintenance and very easy to use.- Easy installation due to its compact size.- Minimum mixing capacity 1 liter and maximum 2 liters.- Noise level below 70 dB.- Cycle with time control or with temperature control.- Vertical cylinders-evaporators for a bigger surface of exchange.- Exclusive dispensing device.- Auto diagnostic system.- Cycle time: 10/20 min.- Hourly production: 12 liters.NB: mainly for cold work.
%
- Air condenser.- Vertical turbine with automatic extraction, low maintenance and very easy to use.- Easy installation due to its compact size.- Minimum mixing capacity 1 liter and maximum 2 liters.- Noise level below 70 dB.- Cycle with time control or with temperature control.- Vertical cylinders-evaporators for a bigger surface of exchange.- Exclusive dispensing device.- Auto diagnostic system.- Cycle time: 10/20 min.- Hourly production: 12 liters.NB: mainly for cold work.
%
Superior top 1.5 mm, rounded edge.Ventilated refrigeration with uniform airflows in order to guarantee a homogenous distribution of the cold, even on the shelves of the display, thanks to its particular system of the cold canalization.Pressed basin GN-150 mm, rounded corners, drainage.Display with 3 shelves, opened on customer side.Made in stainless steel AISI 304.Built in hermetic unit.Refrigerant gas R290.
%
Cooling capacity rendered 1960 (W/f) for chamber volume 16,4 m³ / 16400 Lit. (T° internal 0° C & T° external +32° C).Refrigerant expansion by capillary. "Overlapping" refrigeration units.Unit certified in climatic class 5 (40°C Temperature - 40% Humidity).All units are supplied as standard with a high pressure switch and KVL valve.Automatic hot gas defrost with self-evaporation and overflow.The evaporator drain pipe is equipped with a resistor to prevent ice formation. Refrigerant gas...
%
Supplied with one LED lamp (52 Watt). Made of polycarbonate.Conceived for temperatures max. 40°C .Lower hiding place transparent fixed with clips facilitating the dismantling for the maintenance.Protection class IP65
%
Superior top 1.5 mm, rounded edge, pressed 20 mm deep for dimensions GN with rounded corners, drainage.Ventilated refrigeration with uniform airflows in order to guarantee a homogenous distribution of the cold, even on the shelves of the display, thanks to its particular system of the cold canalization.Display with 3 shelves, opened on customer side.Made in stainless steel AISI 304.Built in hermetic unit.Refrigerant gas R290.
%
Superior top 1.5 mm, rounded edge.Ventilated refrigeration with uniform airflows in order to guarantee a homogenous distribution of the cold, even on the shelves of the display, thanks to its particular system of the cold canalization.Pressed basin GN-150 mm, rounded corners, drainage.Display with 3 shelves, opened on customer side.Made in stainless steel AISI 304.Built in hermetic unit.Refrigerant gas R290.
%
Cell for loading GN 2/1 (or GN 1/1).Load capacity: 10x GN2/1 or 8x 600x400mm.Production per cycle: 100Kg (+70° +3°) and 70Kg (+70° -18°).Chamber size: 670x843xh900mm.Core probe.Built-in compressor unit.NB: delivered without grids and GN plates. Interior and exterior construction in AISI 304 stainless steel, monobloc structure, expanded polyurethane insulation, CFC and HCFC-free, 60 mm thick, stainless steel feet.Speaker: rounded corners and angles without roughness. Deep-drawn bottom that...
%
Superior top 1.5 mm, rounded edge, pressed 20 mm deep for dimensions GN with rounded corners, drainage.Ventilated refrigeration with uniform airflows in order to guarantee a homogenous distribution of the cold, even on the shelves of the display, thanks to its particular system of the cold canalization.Display with 3 shelves, opened on customer side.Made in stainless steel AISI 304.Built in hermetic unit.Refrigerant gas R290.
%
8W LEDs. Made of AISI 441 stainless steel.Designed for temperatures max. 40°C .Transparent bottom cover fixed with clips for easy disassembly for maintenance.
%
14W LEDs. Made of AISI 441 stainless steel.Designed for high temperatures (+65°).Transparent bottom cover fixed with clips for easy disassembly for maintenance.
%
25W LEDs Made of AISI 441 stainless steel.Designed for temperatures max. 40°C .Transparent bottom cover fixed with clips for easy disassembly for maintenance.
%
25W LEDs. Made of AISI 441 stainless steel.Designed for temperatures max. 40°C .Transparent bottom cover fixed with clips for easy disassembly for maintenance.
%
Superior top 1.5 mm, rounded edges.Plate to keep temperature in vitroceramics.Electric heating by element sited under the tank.Made in stainless steel AISI 304.
%
25W LEDs. Made of AISI 441 stainless steel.Designed for temperatures max. 40°C .Transparent bottom cover fixed with clips for easy disassembly for maintenance.
%
2 Led of 14W. Made of AISI 441 stainless steel.Designed for temperatures max. 40°C .Transparent bottom cover fixed with clips for easy disassembly for maintenance.
%
2 Led of 25W. Made of AISI 441 stainless steel.Designed for temperatures max. 40°C .Transparent bottom cover fixed with clips for easy disassembly for maintenance.
%
2 Led of 25W. Made of AISI 441 stainless steel.Designed for temperatures max. 40°C .Transparent bottom cover fixed with clips for easy disassembly for maintenance.
%
2 Led of 25W. Made of AISI 441 stainless steel.Designed for temperatures max. 40°C .Transparent bottom cover fixed with clips for easy disassembly for maintenance.