%
Stainless steel tank and drum AISI 304.Steel base (epoxy paint).Mechanic timer from 0 to 15 minutes.Delivered with bolts for the ground anchor.
%
Made of stainless steel AISI 304.2 fluorescent tubes with actinic rays (2x 15 W).Low use comparable with 1 lamp of 50 Watt.Voltage 5000 V (grounding when in the case of voltage).Attraction angle 180°, protected surface 100 m2.
%
Made of stainless steel AISI 304.2 fluorescent tubes with actinic rays (2x 15 W).Low use comparable with 1 lamp of 50 Watt.Voltage 5000 V (grounding when in the case of voltage).Attraction angle 360°, protected surface 125 m2.
%
Supplied with one LED lamp (52 Watt). Made of polycarbonate.Conceived for temperatures max. 40°C .Lower hiding place transparent fixed with clips facilitating the dismantling for the maintenance.Protection class IP65
%
Cell for loading GN 2/1 (or GN 1/1).Load capacity: 10x GN2/1 or 8x 600x400mm.Production per cycle: 100Kg (+70° +3°) and 70Kg (+70° -18°).Chamber size: 670x843xh900mm.Core probe.Built-in compressor unit.NB: delivered without grids and GN plates. Interior and exterior construction in AISI 304 stainless steel, monobloc structure, expanded polyurethane insulation, CFC and HCFC-free, 60 mm thick, stainless steel feet.Speaker: rounded corners and angles without roughness. Deep-drawn bottom that...
%
8W LEDs. Made of AISI 441 stainless steel.Designed for temperatures max. 40°C .Transparent bottom cover fixed with clips for easy disassembly for maintenance.
%
14W LEDs. Made of AISI 441 stainless steel.Designed for high temperatures (+65°).Transparent bottom cover fixed with clips for easy disassembly for maintenance.
%
25W LEDs Made of AISI 441 stainless steel.Designed for temperatures max. 40°C .Transparent bottom cover fixed with clips for easy disassembly for maintenance.
%
25W LEDs. Made of AISI 441 stainless steel.Designed for temperatures max. 40°C .Transparent bottom cover fixed with clips for easy disassembly for maintenance.
%
25W LEDs. Made of AISI 441 stainless steel.Designed for temperatures max. 40°C .Transparent bottom cover fixed with clips for easy disassembly for maintenance.
%
2 Led of 14W. Made of AISI 441 stainless steel.Designed for temperatures max. 40°C .Transparent bottom cover fixed with clips for easy disassembly for maintenance.
%
2 Led of 25W. Made of AISI 441 stainless steel.Designed for temperatures max. 40°C .Transparent bottom cover fixed with clips for easy disassembly for maintenance.
%
2 Led of 25W. Made of AISI 441 stainless steel.Designed for temperatures max. 40°C .Transparent bottom cover fixed with clips for easy disassembly for maintenance.
%
2 Led of 25W. Made of AISI 441 stainless steel.Designed for temperatures max. 40°C .Transparent bottom cover fixed with clips for easy disassembly for maintenance.
%
Neutral counter.Two intermediate glass.Double LED lighting of the display (under the upper and lower glass). Thermoformed ABS sides, front and rear in plastic coated sheet metal.Tempered glass windows, 90° straight front window, openable and foldable with safety stop (easy maintenance).Anodized aluminum profiles. Exposure in stainless steel AISI 304, depth 700 mm (EURONORM and GASTRONORM).Plexiglass deflector, allowing a homogeneous distribution of the temperature.AISI 304 stainless steel...
%
Flow rate: 2500 m³/o. (Pressure drop 210 Pa). Centrifugal double-inlet ventilation units with built-in motor (operating temperature/resistance: -20° to 40°).Enclosed motor, IP54 protection rating.Galvanized steel casing with 5 mm internal sound insulation (polyurethane foam).Side inspection for after-sales service (S.A.V.).
%
Single-Phase Version.Pre-cut air inlet with a diameter of 250 mm.Airflow: 3200 m³/h (pressure drop: 200 Pa). Centrifugal single-inlet ventilation units with built-in motor (operating temperature/resistance: -20° +110°).Aluminum profiles and cladding panels made of galvanized "sandwich" type sheets with 20mm acoustic insulation (polyurethane foam).Panel with handle for easy access to the impeller for maintenance.Open motor access area for after-sales service inspection.Closed motor, IP54...
%
Three-Phase Version.Pre-cut air inlet with a diameter of 250 mm.Airflow: 3400 m³/h (pressure drop: 200 Pa). Centrifugal single-inlet ventilation units with built-in motor (operating temperature/resistance: -20° +110°).Aluminum profiles and cladding panels made of galvanized "sandwich" type sheets with 20mm acoustic insulation (polyurethane foam).Panel with handle for easy access to the impeller for maintenance.Open motor access area for after-sales service inspection.Closed motor, IP54...
%
Expansion refrigerant R600aInternal dimensions: 890x510xh715Mechanical thermostat, T° -23° +10Digital thermometer.Internal capacity 289 liters. Double temperature (refrigeration/freezing)Solid lid, sliding.Digital thermometer.On/Off switch.Hermetic unit for ambient T° +32°, ventilated condenser.Static evaporator, placed in the "serpentine" walls.Manual defrost.External construction in white painted steel sheet.Internal realization, embossed aluminium.Insulation in CFC-free polyurethane.Frame...
%
Grey color, door with magnetic closureRefrigeration by fluid "absorption" = ammonia
%
- Gray color, door with magnetic door lock- Cooling by liquid suction = ammonia system
%
- Gray color, door with magnetic door lock- Cooling by liquid suction = ammonia system
%
Interior lighting.Electronic thermostat, automatic defrosting. For GN trays with a maximum depth of 100 mm, or pastry plates 600x400 mm. Intermediant grid 945x400 mm, curved glass and side walls, removable (maintainability). Sliding doors on the service side. Made in stainless steel.NB: delivered without trays.
%
Refrigerant gas R290 External and internal aluminium structureMagnetic strip for decorationSliding glass doorsKey lockDouble glazed walls and ceilingUV protection Customisable interior fittings (optional)Digital thermostatLED lightingRefrigeration coilAutomatic defrost and self-evaporation of condensateAnti-vibration systemHeated door railsNB: See DE.... for display case decoration.