%
Oven "LENGTHWISE" payload plates GN 1/3, 1/2, 2/3 and 1/1.Load capacity 30Kg.Lateral structures less than 65 mm "anti-tipping".Core temperature probe.Structure (Dx & Gx) 600x400 EURONORM (on request ref. AC/SE...)NB: delivered without grids and without GN plates. Inner and outer construction in stainless steel AISI 304, thermal insulation in ceramic fibre, control panel with stainless steel filter, preventing soiling of the components (ventilated panel), stainless steel feet. Cooking...
%
2 drawers version GN 1/2+1/3 (maximum height 320 mm).1 ventilated evaporator "treaty".4 adjustable stainless steel feet. Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools).Compressor unit climate class 4 (30°C Temperature & 55% Humidity), ),...
%
- Frame version with wheels (with brakes).- Made of AISI 304 stainless steel.- Powerful, ventilated motor, drive by hermetic gear motor, under oil bath, double protection of liquids. - Ideal for hard mixes or salads (minimum load 40%).- Tank with double liquid protection, foldable (with lever), automatic locking and safety locking device.- Cover equipped with a safety microswitch.- 2 mixing arms (side by side), removable (without tools), easy maintenance.- Geared motor housed in the side...
%
Oven "LENGTHWISE" payload plates GN 1/3, 1/2, 2/3 and 1/1.Load capacity 30Kg.Lateral structures less than 65 mm "anti-tipping".Core temperature probe.Structure (Dx & Gx) 600x400 EURONORM (on request ref. AC/SE...)NB: delivered without grids and without GN plates. Inner and outer construction in stainless steel AISI 304, thermal insulation in ceramic fibre, control panel with stainless steel filter, preventing soiling of the components (ventilated panel), stainless steel feet. Cooking...
%
Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools).Compressor unit climate class 4 (30°C Temperature & 55% Humidity), ), built into the cabinet (right), ventilated condenser.Frontal accessibility of the compressor group, easy...
%
Table top model.Made of AISI 304 stainless steel.Powerful motor. The rotor works in oil-bath and it's equipped with a double sealing system.Safety microswitch on the cover.Removable AISI 304 stainless steel mixing arm (no tools required).Front outlet opening for shaft removal and product unload.IP 54 on/off switch with NVR (24 V) and reverse for a better mix.Machine produced in accordance with the actual CE standards.
%
Oven "LENGTHWISE" payload plates GN 1/3, 1/2, 2/3 and 1/1.Load capacity 50 Kg.Lateral structures less than 65 mm "anti-tipping".Core temperature probe.Structure (Dx & Gx) 600x400 EURONORM (on request ref. AC/SE...)NB: delivered without grids and without GN plates. Inner and outer construction in stainless steel AISI 304, thermal insulation in ceramic fibre, control panel with stainless steel filter, preventing soiling of the components (ventilated panel), stainless steel feet. Cooking...
%
2 drawers version GN 1/1max. load Height 320 mm1 ventilated evaporator "treaty".4 adjustable stainless steel feet. Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools), electrical resistance against the door, allowing the opening of the...
%
- Version on base with wheels (with brakes).- Made of AISI 304 stainless steel.- Powerful, ventilated, hermetically sealed gearmotor drive, under oil bath, double liquid protection.- Lid fitted with safety micro-switch.- Mixing arms can be removed (no tools required), easy maintenance.- Bowl opening on the side, for discharge of mixture and mixing arm.- 24 V controls (IP 54), with rotation inversion (better homogenization).
%
Oven "LENGTHWISE" payload plates GN 1/3, 1/2, 2/3 and 1/1.Load capacity 50 Kg.Lateral structures less than 65 mm "anti-tipping".Core temperature probe.Structure (Dx & Gx) 600x400 EURONORM (on request ref. AC/SE...)NB: delivered without grids and without GN plates. Inner and outer construction in stainless steel AISI 304, thermal insulation in ceramic fibre, control panel with stainless steel filter, preventing soiling of the components (ventilated panel), stainless steel feet. Cooking...
%
3 drawers version max. load Height 320 mm.2 ventilated evaporator "treaty".6 adjustable stainless steel feet. Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools), electrical resistance against the door, allowing the opening of the...
%
- Chassis-mounted version with wheels (with brakes).- Made of AISI 304 stainless steel.- Powerful, ventilated motor, hermetically sealed gear motor drive, under oil bath, double liquid protection. - Ideal for hard mixes or salads (minimum load 40%).- Bowl with double liquid protection, hinged (with lever), automatic locking and safety locking device.- Lid fitted with safety microswitch.- 2 mixing arms (side by side), removable (no tools required), easy maintenance.- Geared motor housed in...
%
Oven payload plates GN 2/1 (or GN 1/1).Load capacity 100 Kg.Lateral structures less than 65 mm "anti-tipping".Core temperature probe.Charger 600x400 EURONORM (on request ref : AC/P12...)NB: delivered without grids and without GN plates. Inner and outer construction in stainless steel AISI 304, thermal insulation in ceramic fibre, control panel with stainless steel filter, preventing soiling of the components (ventilated panel), stainless steel feet. Cooking chamber: fully welded, completely...
%
2 drawers version GN 1/1 max. load Height 320 mm1 ventilated evaporator "treaty".4 adjustable stainless steel feet. Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools).TCompressor unit climate class 4 (30°C Temperature & 55% Humidity), ),...
%
Oven payload plates GN 2/1 (or GN 1/1).Load capacity 100 Kg.Lateral structures less than 65 mm "anti-tipping".Core temperature probe.Charger 600x400 EURONORM (on request ref : AC/P12...)NB: delivered without grids and without GN plates. Inner and outer construction in stainless steel AISI 304, thermal insulation in ceramic fibre, control panel with stainless steel filter, preventing soiling of the components (ventilated panel), stainless steel feet. Cooking chamber: fully welded, completely...
%
4 drawers version GN 1/1 (maximum height 100 mm).1 ventilated evaporator "treaty".4 adjustable stainless steel feet. Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools).Compressor unit climate class 4 (30°C Temperature & 55% Humidity), ),...
%
Oven "LENGTHWISE" payload plates GN 1/3, 1/2, 2/3 and 1/1.Load capacity 30Kg.1 transfer cart and 1 detachable loader less than 65 mm "anti-tipping".Core temperature probe.Cart & charger 600x400 EURONORM (on request ref: AC/2P2...)Bottom closing plate integrated in the doorAdjustable stainless steel feetNB: delivered without grids and without GN plates. Inner and outer construction in stainless steel AISI 304, thermal insulation in ceramic fibre, control panel with stainless steel filter,...
%
3 drawers version GN 1/1max. load Height 320 mm2 ventilated evaporators "treaty".6 adjustable stainless steel feet. Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools).Compressor unit climate class 4 (30°C Temperature & 55% Humidity), ), built...
%
Oven "LENGTHWISE" payload plates GN 1/3, 1/2, 2/3 and 1/1.Load capacity 30Kg.1 transfer cart and 1 detachable loader less than 65 mm "anti-tipping".Core temperature probe.Cart & charger 600x400 EURONORM (on request ref: AC/2P2...)Bottom closing plate integrated in the doorAdjustable stainless steel feetNB: delivered without grids and without GN plates. Inner and outer construction in stainless steel AISI 304, thermal insulation in ceramic fibre, control panel with stainless steel filter,...
%
6 drawers version GN 1/1 (maximum height 100 mm).2 ventilated evaporators "treaty".6 adjustable stainless steel feet. Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools).Compressor unit climate class 4 (30°C Temperature & 55% Humidity), ),...
%
Oven payload plates GN 2/1 (or GN 1/1).Load capacity 200 Kg.1 transfer cart and 1 detachable loader less than 65 mm "anti-tipping".Core temperature probe.Cart & charger 600x400 EURONORM (on request ref: AC/2P2...)Bottom closing plate integrated in the doorAdjustable stainless steel feetNB: delivered without grids and without GN plates. Inner and outer construction in stainless steel AISI 304, thermal insulation in ceramic fibre, control panel with stainless steel filter, preventing...
%
Version 2 drawers GN 1/1max. load Height 320 mm2 ventilated evaporators "treaty".6 adjustable stainless steel feet. Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools).Compressor unit climate class 4 (30°C Temperature & 55% Humidity), ), built...
%
Oven payload plates GN 2/1 (or GN 1/1).Load capacity 200 Kg.1 transfer cart and 1 detachable loader less than 65 mm "anti-tipping".Core temperature probe.Cart & charger 600x400 EURONORM (on request ref: AC/2P2...)Bottom closing plate integrated in the doorAdjustable stainless steel feetNB: delivered without grids and without GN plates. Inner and outer construction in stainless steel AISI 304, thermal insulation in ceramic fibre, control panel with stainless steel filter, preventing...
%
Version 8 drawers GN 1/1 (maximum height 100 mm).2 ventilated evaporators "treaty".6 adjustable stainless steel feet. Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools).Compressor unit climate class 4 (30°C Temperature & 55% Humidity), ),...