%
2 drawers version GN 1/2+1/3 (maximum height 320 mm).1 ventilated evaporator "treaty".4 adjustable stainless steel feet. Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools).Compressor unit climate class 4 (30°C Temperature & 55% Humidity), ),...
%
2 independent burners 1x2.1 & 1x2.5 KwDesigned for building-in 385x585 mmControl box delivered separately Vitroceramic with infra-red radiant heating zones, quick warming up.Easy maintenance of the cooking surfaceGraduated energy regulator for each heating zone, with indicator lamp.Manufactured in stainless steel AISI 304.
%
Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools).Compressor unit climate class 4 (30°C Temperature & 55% Humidity), ), built into the cabinet (right), ventilated condenser.Frontal accessibility of the compressor group, easy...
%
2 independent burners 1x2.1 & 1x2.5 KwDesigned for building-in 385x585 mmControl box delivered separately Vitroceramic with infra-red radiant heating zones, quick warming up.Easy maintenance of the cooking surfaceGraduated energy regulator for each heating zone, with indicator lamp.Manufactured in stainless steel AISI 304.
%
2 drawers version GN 1/1max. load Height 320 mm1 ventilated evaporator "treaty".4 adjustable stainless steel feet.Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools), electrical resistance against the door, allowing the opening of the...
%
Tank : 325x535xh175 mm, GN until 150 mm.Designed for building-in 385x585 mmControl box delivered separatelyNB : delivered without GN container.Tank in stainless steel AISI 304, with one perforated base grill, drainage tap (bullet) put under the machine.Heating by armoured elements made of stainless steel, put under the bottom of the tank, outside.On/Off switch, with indicator lampRegulation from 30° to 90°C, by thermostat.Manufactured in stainless steel AISI 304.NB : delivered without GN...
%
3 drawers versionGN 1/1 max. load Height 320 mm.2 ventilated evaporator "treaty".6 adjustable stainless steel feet.Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools), electrical resistance against the door, allowing the opening of the...
%
Tank 320x370x145 mm (20L).Designed for building-in 385x585 mmControl box delivered separately.NB : baskets A65/CP-C4 not included.Tank in stainless steel AISI 316, resistant to salt corrosion and wear (15/10th), with one overflow pipe for starch and one perforated double base in stainless steel.The drain tap (bullet) is put under the machine.Heating by armoured elements made of stainless steel, put inside the tray.Regulation by a 4-position switch, with indicator lamp.Manufactured in...
%
2 drawers version GN 1/1 max. load Height 320 mm1 ventilated evaporator "treaty".4 adjustable stainless steel feet. Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools).TCompressor unit climate class 4 (30°C Temperature & 55% Humidity), ),...
%
- Tank 320x370x145 mm (20L).- Designed for building-in 385x585 mm - Control box delivered separately.- NB : baskets A65/CP-C4 not included.- Tank in stainless steel AISI 316, resistant to salt corrosion and wear (15/10th), with one overflow pipe for starch and one perforated double base in stainless steel.- The drain tap (bullet) is put under the machine.- Heating by armoured elements made of stainless steel, put inside the tray.- Regulation by a 4-position switch, with indicator lamp.-...
%
4 drawers version GN 1/1 (maximum height 100 mm).1 ventilated evaporator "treaty".4 adjustable stainless steel feet. Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools).Compressor unit climate class 4 (30°C Temperature & 55% Humidity), ),...
%
Tank 620x370x145 mm (40L).Designed for building-in 685x585 mmControl box delivered separately.NB : baskets A65/CP-C4 not included. Tank in stainless steel AISI 316, resistant to salt corrosion and wear (15/10th), with one overflow pipe for starch and one perforated double base in stainless steel.The drain tap (bullet) is put under the machine.Heating by armoured elements made of stainless steel, put inside the tray.Regulation by a 4-position switch, with indicator lamp.Manufactured in...
%
3 drawers version GN 1/1max. load Height 320 mm2 ventilated evaporators "treaty".6 adjustable stainless steel feet. Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools).Compressor unit climate class 4 (30°C Temperature & 55% Humidity), ), built...
%
Tank 620x370x145 mm (40L).Designed for building-in 685x585 mmControl box delivered separately.NB : baskets A65/CP-C4 not included. Tank in stainless steel AISI 316, resistant to salt corrosion and wear (15/10th), with one overflow pipe for starch and one perforated double base in stainless steel.The drain tap (bullet) is put under the machine.Heating by armoured elements made of stainless steel, put inside the tray.Regulation by a 4-position switch, with indicator lamp.Manufactured in...
%
6 drawers version GN 1/1 (maximum height 100 mm).2 ventilated evaporators "treaty".6 adjustable stainless steel feet. Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools).Compressor unit climate class 4 (30°C Temperature & 55% Humidity), ),...
%
Tank 245x365xh210 mm, min. 9 L, max. 10 LBasket 220x300xh110 mm.Designed for building-in 385x585 mmControl box delivered separately. "Stamped tank" in stainless steel AISI 304, rounded interior corners for a simple and hygienic maintenance, with cold zone, (bullet) outlet tap put under the machine.One grill made of chrome steel wire put inside the basin to retain impurities, stainless steel lid.Heating by armoured elements made of stainless steel, put inside the tank, resistances tumbling...
%
Version 2 drawers GN 1/1max. load Height 320 mm2 ventilated evaporators "treaty".6 adjustable stainless steel feet. Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools).Compressor unit climate class 4 (30°C Temperature & 55% Humidity), ), built...
%
Tank 245x365xh210 mm, min. 9 L, max. 10 LBasket 220x300xh110 mm.Designed for building-in 385x585 mmControl box delivered separately. "Stamped tank" in stainless steel AISI 304, rounded interior corners for a simple and hygienic maintenance, with cold zone, (bullet) outlet tap put under the machine.One grill made of chrome steel wire put inside the basin to retain impurities, stainless steel lid.Heating by armoured elements made of stainless steel, put inside the tank, resistances tumbling...
%
Version 8 drawers GN 1/1 (maximum height 100 mm).2 ventilated evaporators "treaty".6 adjustable stainless steel feet. Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools).Compressor unit climate class 4 (30°C Temperature & 55% Humidity), ),...
%
Hard chromium plate "50 µm".Cooking surface 395x520 mm, 20.5 dm2.Designed for building-in 385x585 mmControl box delivered separately. Cast iron plate with high heat conductibility, with one peripheral welded edge, guaranteeing a perfect watertightness.Drip tray for cooking juice (100x500xh 57 mm = 2.8 Lit) under the machine.Heating by armoured elements made of stainless steel, put under the plate.Regulation from 120° to 320°C by thermostat, with indicator lamp.Manufactured in stainless steel...
%
Hard chromium plate "50 µm".Cooking surface 395x520 mm, 20.5 dm2.Designed for building-in 385x585 mmControl box delivered separately. Cast iron plate with high heat conductibility, with one peripheral welded edge, guaranteeing a perfect watertightness.Drip tray for cooking juice (100x500xh 57 mm = 2.8 Lit) under the machine.Heating by armoured elements made of stainless steel, put under the plate.Regulation from 120° to 320°C by thermostat, with indicator lamp.Manufactured in stainless steel...
%
Hard chromium plate "50 µm".Cooking surface 695x520 mm, 36.1 dm2.Designed for building-in 385x585 mmControl box delivered separately. Cast iron plate with high heat conductibility, with one peripheral welded edge, guaranteeing a perfect watertightness.Drip tray for cooking juice (100x500xh 57 mm = 2.8 Lit) under the machine.Heating by elements made of stainless steel, put under the plate.Regulation from 120° to 320°C by thermostat, with indicator lamp.Manufactured in stainless steel AISI 304.
%
Hard chromium plate "50 µm".Cooking surface 695x520 mm, 36.1 dm2.Designed for building-in 385x585 mmControl box delivered separately. Cast iron plate with high heat conductibility, with one peripheral welded edge, guaranteeing a perfect watertightness.Drip tray for cooking juice (100x500xh 57 mm = 2.8 Lit) under the machine.Heating by elements made of stainless steel, put under the plate.Regulation from 120° to 320°C by thermostat, with indicator lamp.Manufactured in stainless steel AISI 304.
%
Tank 325x530xh150 mm.Designed for building-in 385x585 mmControl box delivered separately.Tank in stainless steel AISI 304, with perforated bottom for food draining.Vault with one ceramic element, put above the machine.ON/OFF switch, with indicator lamp.Manufactured in stainless steel AISI 304.