%
Standard equipment: a double perforated bottom where to place the sushis. Stainless steel construction (Austenitic - Food) and anodized aluminum finishing.Sliding back doors in glass, front window in "toughened glass", curved.Drain for the condensate.Regulation by electronic thermostat (digital).Lighting by "LED".Built-in group (Energy Class 4), quiet, ventilated condenser.Copper evaporator "serpentine" below the tank, also an upper fin evaporator (hidden), refrigerant gas R600a.Adjustable...
%
Variable speed (from 35 to 60 movements per minute)Production capacity 5 to 23 kg (40 Lt)Flour capacity 3 to 15 kgTimer supplied as standardTank Ø 425xh295 mmAnalog control panel with low voltage 24 V (IP55).Traction by gears made of nylon (high hardness), very quiet operation.All moving parts are mounted on spherical bearingsEmergency stop button type "punch".Frame in epoxy painted steel, very thick.Tank, plunging arms in thick AISI 304 stainless steel.Protective plexiglass, with safety...
%
2 drawers version GN 1/2+1/3 (maximum height 320 mm).1 ventilated evaporator "treaty".4 adjustable stainless steel feet. Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools).Compressor unit climate class 4 (30°C Temperature & 55% Humidity), ),...
%
Standard equipment: 6 trays GN 1/3 high 40 mm. Stainless steel construction (Austenitic - Food) and anodized aluminum finishing.Sliding back doors in glass, front window in "toughened glass", curved.Copper evaporator "serpentine" below the tank, refrigerant R600a, drain for the condensate.Regulation by electronic thermostat (digital), Lighting by "LED". NB Provide discharge (or) a condensate drain pan.
%
2 speeds (40 to 60 movements per minute)Production capacity 5 to 40 kg (70 Lt)Flour capacity 3 to 25 kgTimer supplied as standardAdjustable right armTank Ø 530xh320 mmAnalog control panel with low voltage 24 V (IP55).Adjustable plunging arm (the one on the right).Gear drive made of treated and ground cast iron, self-lubricating, perfectly sealed gearbox, very quiet operation.Emergency stop button type "punch".Frame in epoxy painted steel, very thick.Tank, plunging arms in thick AISI 304...
%
Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools).Compressor unit climate class 4 (30°C Temperature & 55% Humidity), ), built into the cabinet (right), ventilated condenser.Frontal accessibility of the compressor group, easy...
%
%
Variable speed (40 to 60 movements per minute)Production capacity 5 to 40 kg (70 Lt)Flour capacity 3 to 25 kgTimer supplied as standardAdjustable right armTank Ø 530xh320 mmAnalog control panel with low voltage 24 V (IP55).Adjustable plunging arm (the one on the right).Gear drive made of treated and ground cast iron, self-lubricating, perfectly sealed gearbox, very quiet operation.Emergency stop button type "punch".Frame in epoxy painted steel, very thick.Tank, plunging arms in thick AISI 304...
%
2 drawers version GN 1/1max. load Height 320 mm1 ventilated evaporator "treaty".4 adjustable stainless steel feet. Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools), electrical resistance against the door, allowing the opening of the...
%
Standard equipment: a double perforated bottom where to place the sushis. Stainless steel construction (Austenitic - Food) and anodized aluminum finishing.Sliding back doors in glass, front window in "toughened glass", curved.Drain for the condensate.Regulation by electronic thermostat (digital).Lighting by "LED".Built-in group (Energy Class 4), quiet, ventilated condenser.Copper evaporator "serpentine" below the tank, also an upper fin evaporator (hidden), refrigerant gas R600a.Adjustable...
%
Variable speed (from 35 to 60 movements per minute)Production capacity 5 to 45 kg (65 Lt)Flour capacity 3 to 25 kgTimer supplied as standardTank Ø 500xh340 mmAnalog control panel with low voltage 24 V (IP55).Traction by gears made of nylon (high hardness), very quiet operation.All moving parts are mounted on spherical bearingsEmergency stop button type "punch".Frame in epoxy painted steel, very thick.Tank, plunging arms in thick AISI 304 stainless steel.Protective plexiglass, with safety...
%
3 drawers version max. load Height 320 mm.2 ventilated evaporator "treaty".6 adjustable stainless steel feet. Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools), electrical resistance against the door, allowing the opening of the...
%
Standard equipment: 8 trays GN 1/3 high 40 mm. Stainless steel construction (Austenitic - Food) and anodized aluminum finishing.Sliding back doors in glass, front window in "toughened glass", curved.Copper evaporator "serpentine" below the tank, refrigerant R134A, drain for the condensate.Regulation by electronic thermostat (digital).Lighting by "LED".Built-in group (Energy Class 4), quiet, ventilated condenser.Adjustable feet.NB Provide discharge (or) a condensate drain pan.
%
Variable speed (35 to 60 movements per minute)Production capacity 5 to 60 kg (92 Lt)Flour capacity 3 to 40 kgTimer supplied as standardAdjustable right armTank Ø 550xh390 mmAnalog control panel with low voltage 24 V (IP55).Adjustable plunging arm (the one on the right).Gear drive made of treated and ground cast iron, self-lubricating, perfectly sealed gearbox, very quiet operation.Emergency stop button type "punch".Frame in epoxy painted steel, very thick.Tank, plunging arms in thick AISI 304...
%
2 drawers version GN 1/1 max. load Height 320 mm1 ventilated evaporator "treaty".4 adjustable stainless steel feet. Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools).TCompressor unit climate class 4 (30°C Temperature & 55% Humidity), ),...
%
2 speeds (Fork: 1st Speed 19 rpm and 2nd Speed 27 rpm) & (Tank: 1st Speed 6 rpm and 2nd Speed 10 rpm)Timer timerSpiral diameter 27 mmDiameter of the tank 580 mm height 230 mm (40 litres) = 35 kg of dough.Comes standard with wheels, 2 of which are equipped with brakes.Optional: scraper in tank, in stainless steel and polyethylene.Analog control panel with low voltage 24V.2-speed motor, gearbox drive (independent tank and fork), self-lubricating, pulley transmission, very quiet...
%
4 drawers version GN 1/1 (maximum height 100 mm).1 ventilated evaporator "treaty".4 adjustable stainless steel feet. Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools).Compressor unit climate class 4 (30°C Temperature & 55% Humidity), ),...
%
%
3 drawers version GN 1/1max. load Height 320 mm2 ventilated evaporators "treaty".6 adjustable stainless steel feet. Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools).Compressor unit climate class 4 (30°C Temperature & 55% Humidity), ), built...
%
2 speeds (Fork: 1st Speed 19 rpm and 2nd Speed 29 rpm) & (Tank: 1st Speed 6 rpm and 2nd Speed 9 rpm)TimerScraper in tank, in stainless steel and polyethylene supplied as standard.Spiral diameter 31 mmDiameter of the tank 660 mm height 330 mm (70 litres) = 60 kg of dough.Comes standard with 2 fixed wheels (nylon) and 2 cylinders at the front.Analog control panel with low voltage 24V.2-speed motor, gearbox drive (independent tank and fork), self-lubricating, pulley transmission, very quiet...
%
6 drawers version GN 1/1 (maximum height 100 mm).2 ventilated evaporators "treaty".6 adjustable stainless steel feet. Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools).Compressor unit climate class 4 (30°C Temperature & 55% Humidity), ),...
%
%
Version 2 drawers GN 1/1max. load Height 320 mm2 ventilated evaporators "treaty".6 adjustable stainless steel feet. Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools).Compressor unit climate class 4 (30°C Temperature & 55% Humidity), ), built...
%
Production capacity 100 kg (160 Lt)Flour capacity 66 kg2 speeds, automatically adjustable (Spiral: 1st Speed 112 rpm and 2nd Speed 230 rpm) & (Tank: 16 rpm)2 electronic timers, for the automatic management of each speed.2 independent motors, one for the tank and one for the spiralDevice for pulse rotation of the tank and reversal of the direction of rotation of the tank.Tank Ø 700xh410 mm Control panel, low voltage 24 V. (IP55).Motors with pulley transmissions.Emergency stop button type...