%
2 drawers version GN 1/2+1/3 (maximum height 320 mm).1 ventilated evaporator "treaty".4 adjustable stainless steel feet. Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools).Compressor unit climate class 4 (30°C Temperature & 55% Humidity), ),...
%
Solid wood structure.Shelves in plywood with solid wood edges and handles. "Wenge" finish.Pull-out rim.Swivel castors, diam. 10 cm.Total capacity 40 kg.Extractable rim is supplied as standard.
%
Charging height 280 mm for dishes and 280mm for glasses. 30 baskets/hour, 120-second cycle.Rotating wash and rinse arms (upper and lower).Self-cleaning sprinklers.Tank (14 Lit., 2,1 kW) with rounded edges.Stamped walls.Double walled door.Removable control panel.Automatic filling of the tank.Check valve.Hot water rinse (water consumption per cycle 2 liters), boiler (pressure) in stainless steel (2,6 Lit., 2,6 kW).Micro switch, when the door opens.Safety thermostat.Manufactured in stainless...
%
Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools).Compressor unit climate class 4 (30°C Temperature & 55% Humidity), ), built into the cabinet (right), ventilated condenser.Frontal accessibility of the compressor group, easy...
%
Solid wood structure.Shelves in plywood with solid wood edges and handles. "Wenge" finish.Pull-out rim.Swivel castors, diam. 10 cm.Total capacity 40 kg.Extractable rim is supplied as standard.
%
Version with incorporated water softener.Charging height 280 mm for dishes and 280mm for glasses. 30 baskets/hour, 120-second cycle.Rotating wash and rinse arms (upper and lower).Self-cleaning sprinklers.Tank (14 Lit., 2,1 kW) with rounded edges.Stamped walls.Double walled door.Removable control panel.Automatic filling of the tank.Check valve.Hot water rinse (water consumption per cycle 2 liters), boiler (pressure) in stainless steel (2,6 Lit., 2,6 kW).Micro switch, when the door opens.Safety...
%
2 drawers version GN 1/1max. load Height 320 mm1 ventilated evaporator "treaty".4 adjustable stainless steel feet. Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools), electrical resistance against the door, allowing the opening of the...
%
Swivel castors, Ø 125 mm. Stainless steel tubular frame, 4 shelves in "dark oak" melamine.Folding arm to support the bags.With 2 laundry bags.PVC bumpers in the corners.
%
Version with incorporated drain pump.Charging height 280 mm for dishes and 280mm for glasses. 30 baskets/hour, 120-second cycle.Rotating wash and rinse arms (upper and lower).Self-cleaning sprinklers.Tank (14 Lit., 2,1 kW) with rounded edges.Stamped walls.Double walled door.Removable control panel.Automatic filling of the tank.Check valve.Hot water rinse (water consumption per cycle 2 liters), boiler (pressure) in stainless steel (2,6 Lit., 2,6 kW).Micro switch, when the door opens.Safety...
%
3 drawers version max. load Height 320 mm.2 ventilated evaporator "treaty".6 adjustable stainless steel feet. Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools), electrical resistance against the door, allowing the opening of the...
%
Swivel castors, Ø 140 mm. Stainless steel tubular frame, 4 shelves in "dark oak" melamine.Folding arm to support the bags, With 2 laundry bags.PVC bumpers in the corners.
%
2 drawers version GN 1/1 max. load Height 320 mm1 ventilated evaporator "treaty".4 adjustable stainless steel feet. Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools).TCompressor unit climate class 4 (30°C Temperature & 55% Humidity), ),...
%
Temperature: -2° -14°C- Manufactured in solid wood.- Plexiglas dome.- Stainless steel AISI 304 display area.- Built-in airtight unit (ambient t° +32°C).- Static evaporator treated against the "coating" acids and the salts. - Refrigerant R134A.- Frame on castors.- Manual defrosting.NB: for the temperature update, this trolley needs to be connected on an electric network +/- 2 hours in advance ; then store the ice cream which might be at its service temperature (-14°C), this trolley isn't...
%
4 drawers version GN 1/1 (maximum height 100 mm).1 ventilated evaporator "treaty".4 adjustable stainless steel feet. Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools).Compressor unit climate class 4 (30°C Temperature & 55% Humidity), ),...
%
Frame in melamine wood "wenge".In front : 1 drawer, cupboard for the tank, cupboard for the plates.2 propane-butane gas burners, 2 regulation valves.Foldable side shelf, bottle holder in chromed steel.4 swivel wheels Ø 125, 2 with brakes.NB: delivered without cylinder and regulator.
%
3 drawers version GN 1/1max. load Height 320 mm2 ventilated evaporators "treaty".6 adjustable stainless steel feet. Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools).Compressor unit climate class 4 (30°C Temperature & 55% Humidity), ), built...
%
Solid beech wood frame with plywood base and sides. Wenge finish.Stainless steel bowl GN , 150 mm deep.Heating with submerged electric resistance protected by grids. Digital thermometer/thermostat.Knife holder, Swivel castors.
%
6 drawers version GN 1/1 (maximum height 100 mm).2 ventilated evaporators "treaty".6 adjustable stainless steel feet. Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools).Compressor unit climate class 4 (30°C Temperature & 55% Humidity), ),...
%
Solid beech wood frame with plywood base and sides. Wenge finish.Stainless steel bowl GN, 150 mm deep.Heating with submerged electric resistance protected by grids. Digital thermometer/thermostat.Knife holder, Swivel castors.
%
Version 2 drawers GN 1/1max. load Height 320 mm2 ventilated evaporators "treaty".6 adjustable stainless steel feet. Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools).Compressor unit climate class 4 (30°C Temperature & 55% Humidity), ), built...
%
Tubular stainless steel structureSupplied complete with 3 removable PVC bottle shelves, with edgerails to prevent slipping, for bottles with Ø up to 65 mm.Grey rubber bumpers at corners.Swiveling castors, Ø 125 mm.
%
Version 8 drawers GN 1/1 (maximum height 100 mm).2 ventilated evaporators "treaty".6 adjustable stainless steel feet. Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools).Compressor unit climate class 4 (30°C Temperature & 55% Humidity), ),...
%
Steel sheet structure, finished with grey epoxy powder paint,composed of a base and of three intern shelves adjustable in height.Removable PVC bottle rack on top.Movement handle.Doors opening through 180°. Lock with key for Art. 2011.Base with edge bumper strips in grey non-marking rubber.Swiveling castors, Ø 160 mm, 2 swiveling, 2 fixed.