%
Autonomous working.Manufactured in aluminium and ABS, collecting tray in food PVC.Stainless steel bowl (3 Lit.)Engine (800 rpm) with reduction gearbox (not direct)Lid with safety microswitch device.Control device for the ice thickness.
%
Decarbonizing and highly degreasing detergent for professional use to remove cooking grease or carbonized deposits cooked by: ovens, plates, grills, rotisseries, deep fryers, plates of cooking, etc.MODALITIES OF USE: Possibly heat the surfaces to 30-40 ° C, spray and distribute the product on all the walls; Let stand for a few minutes, then pass with a damp sponge. If the dirt has been there for some time, let it act a little longer and remove with a spatula. It can also be used cold as long...
%
Frame in galvanized steel.Soundproof isolation.
%
Turns/minute: 15000 rpm.On/Off switch, stainless steel screws.. ABS molded body, inner stainless steel and aluminium structure, polished aluminium hopper, 2 liters receiving receptacle en ABS molded.. Fitted with safety microswitch on hopper lever and receiving receptacle, fitted with thermal motor relay.. Sturdy belt-driven transmission, minimal power loss.. The equipment is manufactured following the (CE) standards in force.
%
Frame in galvanized steel.Soundproof isolation.
%
Frame in galvanized steel.Soundproof isolation.
%
Frame in galvanized steel.Soundproof isolation.
%
Frame in galvanized steel.Soundproof isolation.
%
Frame in galvanized steel.Soundproof isolation.
%
Frame in galvanized steel.Soundproof isolation.
%
Flow: 4500 m³/h. (with reduced pressure of 300 Pa).1180 r/min.Internal ventilator with double ventilation trench with belt.Produced in galvanized steel,Frame in aluminium profiles.Side inspection possible for After Sales Service .Internal soundproof-isolationEquipped with flexible cuffs against congestion and anti-vibration pads.Motor with 2 closed speeds, degree of protection: IP54 (max. temperature 80°C).
%
Flow: 4500 m³/h. (with reduced pressure of 300 Pa).1180 r/min.Internal ventilator with double ventilation trench with belt.Produced in galvanized steel,Frame in aluminium profiles.Side inspection possible for After Sales Service .Internal soundproof-isolationEquipped with flexible cuffs against congestion and anti-vibration pads.Motor with 2 closed speeds, degree of protection: IP54 (max. temperature 80°C).
%
Flow: 5000 m³/h. (with reduced pressure of 300 Pa).1220 r/min.Internal ventilator with double ventilation trench with belt.Produced in galvanized steel,Frame in aluminium profiles.Side inspection possible for After Sales Service .Internal soundproof-isolationEquipped with flexible cuffs against congestion and anti-vibration pads.Motor with 2 closed speeds, degree of protection: IP54 (max. temperature 80°C).
%
Flow: 5000 m³/h. (with reduced pressure of 300 Pa).1220 r/min.Internal ventilator with double ventilation trench with belt.Produced in galvanized steel,Frame in aluminium profiles.Side inspection possible for After Sales Service .Internal soundproof-isolationEquipped with flexible cuffs against congestion and anti-vibration pads.Motor with 2 closed speeds, degree of protection: IP54 (max. temperature 80°C).
%
Flow: 3500 m³/h. (with reduced pressure of 300 Pa).1100 r/min.Internal ventilator with double ventilation trench with belt.Produced in galvanized steel,Frame in aluminium profiles.Side inspection possible for After Sales Service .Internal soundproof-isolationEquipped with flexible cuffs against congestion and anti-vibration pads.Motor with 2 closed speeds, degree of protection: IP54 (max. temperature 80°C).
%
%
Flow: 6000 m³/h. (with reduced pressure of 300 Pa).920 r/min.Internal ventilator with double ventilation trench with belt.Produced in galvanized steel,Frame in aluminium profiles.Side inspection possible for After Sales Service .Internal soundproof-isolationEquipped with flexible cuffs against congestion and anti-vibration pads.Motor with 2 closed speeds, degree of protection: IP54 (max. temperature 80°C).
%
Flow: 6000 m³/h. (with reduced pressure of 300 Pa).920 r/min.Internal ventilator with double ventilation trench with belt.Produced in galvanized steel,Frame in aluminium profiles.Side inspection possible for After Sales Service .Internal soundproof-isolationEquipped with flexible cuffs against congestion and anti-vibration pads.Motor with 2 closed speeds, degree of protection: IP54 (max. temperature 80°C).
%
Flow: 7000 m³/h. (with reduced pressure of 300 Pa).1020 r/min.Internal ventilator with double ventilation trench with belt.Produced in galvanized steel,Frame in aluminium profiles.Side inspection possible for After Sales Service .Internal soundproof-isolationEquipped with flexible cuffs against congestion and anti-vibration pads.Motor with 2 closed speeds, degree of protection: IP54 (max. temperature 80°C).
%
Flow rate 7000 m³/H (pressure drop of 300 Pa).1020 rev/min.Internal fan double inlet transmission belt.Galvanized steel execution.Setting in aluminim profile.Indoor sound insulation.Lateral Inspection for S.A.V.Equipped with flexible sleeve to repression and anti-vibration pads.Motor 2 speeds closed, degree of protection IP54 (max temperature 80 ° C.).
%
Flow rate: 3000 m³/o. (Pressure drop 380 Pa). Centrifugal double-inlet ventilation units with built-in motor (operating temperature/resistance: -20° to 40°).Enclosed motor, IP54 protection rating.Galvanized steel casing with 5 mm internal sound insulation (polyurethane foam).Side inspection for after-sales service (S.A.V.).
%
Flow rate: 4500 m³/o. (Pressure drop 220 Pa). Centrifugal double-inlet ventilation units with built-in motor (operating temperature/resistance: -20° to 40°).Enclosed motor, IP54 protection rating.Galvanized steel casing with 5 mm internal sound insulation (polyurethane foam).Side inspection for after-sales service (S.A.V.).
%
Flow rate: 1300 m³/o. (Pressure drop 200 Pa). Centrifugal double-inlet ventilation units with built-in motor (operating temperature/resistance: -20° to 40°).Enclosed motor, IP54 protection rating.Galvanized steel casing with 5 mm internal sound insulation (polyurethane foam).Side inspection for after-sales service (S.A.V.).
%
Flow rate: 2500 m³/o. (Pressure drop 210 Pa). Centrifugal double-inlet ventilation units with built-in motor (operating temperature/resistance: -20° to 40°).Enclosed motor, IP54 protection rating.Galvanized steel casing with 5 mm internal sound insulation (polyurethane foam).Side inspection for after-sales service (S.A.V.).