%
2 drawers version GN 1/2+1/3 (maximum height 320 mm).1 ventilated evaporator "treaty".4 adjustable stainless steel feet. Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools).Compressor unit climate class 4 (30°C Temperature & 55% Humidity), ),...
%
- Air condenser.- Versatile pasto turbine cookers for cooking, tempering, pasteurizing and freezing all mixtures or pastes. - Multilingual display with 14 pre-programmed cycles and 10 programmable production cycles. - Different heat treatments are carried out in a single cylinder, avoiding any handling or transfer. - Possibility of slow, fast or intermittent agitation. - Automatic memory of the last cycle. - Mix per cycle: 15/30 litres. - Cycle time: 90/130 mi
%
Production 60 pièces/h (temps de cuisson 1 Minute).Plaque en fonte émaillée.Chauffage par résistances en spirale, blindées, en acier inox traitées "incoloy".Régulation de 0 à 300°C, par thermostat, voyant de contrôle.Livré avec une raclette en bois.Châssis en acier inoxydable.Appareil construit dans le respect des normes (CE) en vigueur.
%
Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools).Compressor unit climate class 4 (30°C Temperature & 55% Humidity), ), built into the cabinet (right), ventilated condenser.Frontal accessibility of the compressor group, easy...
%
%
Production 60 pieces/h (cooking time 1 Minute)Enamelled cast iron plate6-point "star" burner, valve control with idle position, safety thermocouple and piezoelectric ignition.Delivered with a wooden scraper.Stainless steel frame.The device is built in compliance with the current CE standards.
%
2 drawers version GN 1/1max. load Height 320 mm1 ventilated evaporator "treaty".4 adjustable stainless steel feet.Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools), electrical resistance against the door, allowing the opening of the...
%
- Water condenser.- Versatile pasto turbine cookers for cooking, tempering, pasteurizing and freezing all mixtures or pastes. - Multilingual display with 14 pre-programmed cycles and 10 programmable production cycles. - Different heat treatments are carried out in a single cylinder, avoiding any handling or transfer. - Possibility of slow, fast or intermittent agitation. - Automatic memory of the last cycle. - Mix per cycle: 15/30 litres. - Cycle time: 90/130 min.
%
Production 2 x 60 pieces/h (cooking time 1 Minute).Varnished cast-iron plate.Heating by spiral resistances, in armoured stainless steel "incoloy" treated.Control by 2 independant thermostat from 0 to 300 °C.Delivered with a wooden scraper.
%
3 drawers versionGN 1/1 max. load Height 320 mm.2 ventilated evaporator "treaty".6 adjustable stainless steel feet.Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools), electrical resistance against the door, allowing the opening of the...
%
%
Production 2x60 = 120 pieces/h (cooking time 1 Minute)Enamelled cast iron plate2 independent burners with 6 "star" branches, regulation by valves with idle position, safety thermocouple and piezoelectric ignition.Delivered with a wooden scraper.Stainless steel frame.The device is built in compliance with the current CE standards.
%
2 drawers version GN 1/1 max. load Height 320 mm1 ventilated evaporator "treaty".4 adjustable stainless steel feet. Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools).TCompressor unit climate class 4 (30°C Temperature & 55% Humidity), ),...
%
- Water condenser.- Versatile pasto turbine cookers for cooking, tempering, pasteurizing and freezing all mixtures or pastes. - Multilingual display with 14 pre-programmed cycles and 10 programmable production cycles. - Different heat treatments are carried out in a single cylinder, avoiding any handling or transfer. - Possibility of slow, fast or intermittent agitation. - Automatic memory of the last cycle. - Mix per cycle: 30/60 litres. - Cycle time: 90/130 min.
%
%
4 drawers version GN 1/1 (maximum height 100 mm).1 ventilated evaporator "treaty".4 adjustable stainless steel feet. Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools).Compressor unit climate class 4 (30°C Temperature & 55% Humidity), ),...
%
%
%
%
3 drawers version GN 1/1max. load Height 320 mm2 ventilated evaporators "treaty".6 adjustable stainless steel feet. Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools).Compressor unit climate class 4 (30°C Temperature & 55% Humidity), ), built...
%
%
6 drawers version GN 1/1 (maximum height 100 mm).2 ventilated evaporators "treaty".6 adjustable stainless steel feet. Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools).Compressor unit climate class 4 (30°C Temperature & 55% Humidity), ),...
%
Version 2 drawers GN 1/1max. load Height 320 mm2 ventilated evaporators "treaty".6 adjustable stainless steel feet. Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools).Compressor unit climate class 4 (30°C Temperature & 55% Humidity), ), built...
%
Version 8 drawers GN 1/1 (maximum height 100 mm).2 ventilated evaporators "treaty".6 adjustable stainless steel feet. Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools).Compressor unit climate class 4 (30°C Temperature & 55% Humidity), ),...