BASKETS 500x500mm - 40 BASKETS / HOURFX Interior & exterior stainless steel AISI1.4301 Double wall, thermal & acoustic insulation Stamped interior Double basket system: simultaneous rinsing of two baskets VISIOTRONIC-TOUCH, intelligent and complete controlin French (30languesauchoix) Program progress color indication Washing and rinsing temperature indication Water consumption meter & number of programs Water consumption reduced to 2 liters / program Ill & dump program...
%
Version with incorporated water softener.Charging height 280 mm for dishes and 280mm for glasses. 30 baskets/hour, 120-second cycle.Rotating wash and rinse arms (upper and lower).Self-cleaning sprinklers.Tank (14 Lit., 2,1 kW) with rounded edges.Stamped walls.Double walled door.Removable control panel.Automatic filling of the tank.Check valve.Hot water rinse (water consumption per cycle 2 liters), boiler (pressure) in stainless steel (2,6 Lit., 2,6 kW).Micro switch, when the door opens.Safety...
Very easy to use and control citrus juicer. You just have to place half of the fruit and lower the lever to start the mechanism.
%
- Manufactured in stainless steel AISI 441. - 3 drawers for the plates 600x400.PLUS: Modulate you piece of furniture according to your needs, each module is 500-mm wide, except the cupboards with sliding doors, which are 1000, 1500 and 2000 mm. Possible to put a 800-mm deep top, on request.
%
Realisation "double walled".Charging height dishes 390 mm (glass height 355mm) From 40 till 24 baskets/hour, cycles 90'' - 150''.Washing arm and rinsing (upper and lower) rotating (lower in stainless steel).Self cleaning sprinklers.Double wall door, "stamped", "removable" waterproof seal.Removable control panel.Automatic filling of the tank.Check valve.Hot water rinse (water consumption per cycle 2.4 liters), boiler (pressure) in stainless steel (6 Lit., 3 kW).Micro switch, when the door...
%
%
Standard equipment includes 1 GN 2/3 grid.1 "autoreverse" turbine. Inside and outside made off stainless steel AISI 430.Chamber with rounded corners.Joint on the inner door, easily removable.Stamped bottom collects the condensate to the waste unit. Plate holder structure, easily removable (70 mm).Heat diffusers easily removable.Evacuation pipe for the condensate.Motors with "autoreverse" turbines (2800 t/mn) guarantee a perfect heat diffusion.Micro-switch stops the fan when the door...
Dishwasher with electronic hood with 1200mm inlet table and 700mm outlet table.More info on request
%
- Manufactured in stainless steel AISI 441.- 2 sliding doors, isolated double walls, adjustable intermediate shelf.PLUS: Modulate you piece of furniture according to your needs, each module is 500-mm wide, except the cupboards with sliding doors, which are 1000, 1500 and 2000 mm. Possible to put a 800-mm deep top, on request.
%
Supplied with 1 grid GN 1/12 fans "autoreverse" Inside and outside made off stainless steel AISI 430.Chamber with rounded corners.Easily removable" counter-door seal.Deep-drawn bottom collects condensation towards discharge.Easily removable plate-holder structure (75 mm).Easily removable deflectors.Condensate drain.Motor(s) with "autoreverse" turbines (2800 rpm) guarantee even heat distribution.Door: athermic, double-glazed (4 mm), intermediate pane hinged for easy maintenance.Ergonomic,...
%
%
- Manufactured in stainless steel AISI 441. - 2 sliding doors, isolated double walls, adjustable intermediate shelf.PLUS: Modulate you piece of furniture according to your needs, each module is 500-mm wide, except the cupboards with sliding doors, which are 1000, 1500 and 2000 mm. Possible to put a 800-mm deep top, on request.
%
Production capacity 200 baskets/hourPre-wash + Washing + rinsing2 forward speedsPredisposed for left-hand entryLoad height 440 mmWater pressure reducer, equipped with pressure gauge.Made in AISI 304 Stainless Steel, of 12/10mm and 30/10mm thick, double skin thermal and acoustic insulation (-60db) with adjustable stainless steel feet.Linear or angular configuration with left and right entry/feed tablesTraction system with parallel stainless steel bars.Automatic advance system with 3...
%
Supplied with 1 grid GN 1/12 fans "autoreverse" Inside and outside made off stainless steel AISI 430.Chamber with rounded corners.Easily removable" counter-door seal.Deep-drawn bottom collects condensation towards discharge.Easily removable plate-holder structure (75 mm).Easily removable deflectors.Condensate drain.Motor(s) with "autoreverse" turbines (2800 rpm) guarantee even heat distribution.Door: athermic, double-glazed (4 mm), intermediate pane hinged for easy maintenance.Ergonomic,...
%
- Manufactured in stainless steel AISI 441. - 2 sliding doors, isolated double walls, adjustable intermediate shelf.PLUS: Modulate you piece of furniture according to your needs, each module is 500-mm wide, except the cupboards with sliding doors, which are 1000, 1500 and 2000 mm. Possible to put a 800-mm deep top, on request.
%
Supplied with 1 grid GN 1/12 fans "autoreverse" Inside and outside made off stainless steel AISI 430.Chamber with rounded corners.Easily removable" counter-door seal.Deep-drawn bottom collects condensation towards discharge.Easily removable plate-holder structure (75 mm).Easily removable deflectors.Condensate drain.Motor(s) with "autoreverse" turbines (2800 rpm) guarantee even heat distribution.Door: athermic, double-glazed (4 mm), intermediate pane hinged for easy maintenance.Ergonomic,...
%
Charging height 430 mm From 60 to 30 baskets/hour, 2 cycles 60'' - 120''.Rotating wash and rinse arms.Self cleaning sprinklers.Adjustable stainless steel feet (160-220 mm).Front control panel.Automatic filling of the tank.Check valve.Hot water rinse, stainless steel boiler (12 Lit., 8 kW).Micro switch, when the door opens.Safety thermostat.Manufactured in stainless steel AISI 304.Standard: 2 baskets, 1 goblet.
%
- Manufactured in stainless steel AISI 441. - Top : in stainless steel 15/10, reinforced by a stainless steel sheet on the bottom.- Modules: 3 drawers for the shelves 600x400, plates structures 6 slide levels 600x400.- Hopper: capacity 125 lit., lid + wheels.PLUS: Modulate you piece of furniture according to your needs, each module is 500-mm wide, except the cupboards with sliding doors, which are 1000, 1500 and 2000 mm. Possible to put a 800-mm deep top, on request.
%
%
%
- Manufactured in stainless steel AISI 441. - Top : in stainless steel 15/10, reinforced by a stainless steel sheet on the bottom.- Cupboards: 2 isolated sliding doors with double wall , adjustable intermediate shelf.- Modules: 3 drawers for the shelves 600x400, plates structures 6 slide levels 600x400.- Hopper: capacity 125 lit., lid + wheels.PLUS: Modulate you piece of furniture according to your needs, each module is 500-mm wide, except the cupboards with sliding doors, which are 1000,...
%
Oven "CROSSWISE" loading plates GN 1/1.Laterale structure on 60mm "anti tilting". Manufacture: interior in stainless steel AISI 304 and exterior in stainless steel AISI 430, thermal insulation in ceramic fibre.Cooking room : entirely welded, rounded angles and corners. Seal placed on the front of the cooking room. Stamped bottom which collect condensation to the draining system. Plate carrying structure, easily removable. Heat circulators easy to dismantle. (Adjustable) vent valve widely...
%
- Consists of:1x 015-25D/61x DL251x CW80021x DLV-D12