Description* Stainless steel body. * Model machine in three phases. * Integrated filter system. * Non-clogging drained filter system that has been integrated under the machine to collect all patato peels. * The update will automatically stop the machine when the adjusted time is finished. * Compatible with HACCP requirements. * The motor is thermally protected. * Front cover discharge. * It automatically peels and washes the potatoes.TypeElectricLENGHT (leNGHT)620Width920Height1,470NET...
%
2 drawers version GN 1/2+1/3 (maximum height 320 mm).1 ventilated evaporator "treaty".4 adjustable stainless steel feet. Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools).Compressor unit climate class 4 (30°C Temperature & 55% Humidity), ),...
Very easy to use and control citrus juicer. You just have to place half of the fruit and lower the lever to start the mechanism.
Description* Stainless steel body. * Model machine in three phases. * Integrated filter system. * Non-clogging drained filter system that has been integrated under the machine to collect all patato peels. * The update will automatically stop the machine when the adjusted time is finished. * Compatible with HACCP requirements. * The motor is thermally protected. * Front cover discharge. * It automatically peels and washes the potatoes.TypeElectricLENGHT (leNGHT)510Width875Height1,400NET...
%
Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools).Compressor unit climate class 4 (30°C Temperature & 55% Humidity), ), built into the cabinet (right), ventilated condenser.Frontal accessibility of the compressor group, easy...
%
- Stainless steel AISI 304 lever on top.- All parts in contact with the citrus fruit can be dismatled without tools, easy maintenance.- Delivered with 1 polycarbonate mug.- Motor 1300 rpm with thermal security.- Finishing: orange.Note: continuous time of use span 30 min.
Description* Stainless steel body. * Model machine in three phases. * Integrated filter system. * Non-clogging drained filter system that has been integrated under the machine to collect all patato peels. * The update will automatically stop the machine when the adjusted time is finished. * Compatible with HACCP requirements. * The motor is thermally protected. * Front cover discharge. * It automatically peels and washes the potatoes.TypeElectricLENGHT (leNGHT)480Width750Height1,300NET...
%
2 drawers version GN 1/1max. load Height 320 mm1 ventilated evaporator "treaty".4 adjustable stainless steel feet. Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools), electrical resistance against the door, allowing the opening of the...
%
Stainless steel AISI 304 lever on top.All parts in contact with the citrus fruit can be dismatled without tools, easy maintenance.Delivered with 1 polycarbonate mug.Motor 1300 rpm with thermal security.Finishing: chrome.
%
Stainless steel model designed with abrasive coating on the walls of the tank and abrasive plate for the traditional peeling of potatoes, turnips and other similar tubers. • Machine combining speed and simplicity of operation with a robust and durable construction. • Perfectly suited to communities due to its throughput of around 500 kg/h and the low level of waste. • Equipped as standard with a timer, a stainless steel base with filter basket and an abrasive plate
%
3 drawers version max. load Height 320 mm.2 ventilated evaporator "treaty".6 adjustable stainless steel feet. Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools), electrical resistance against the door, allowing the opening of the...
%
- Production: 20/25 oranges (maximum diameter 85 mm) per minute.- Storage capacity: 4 Kg.- Loading ramp and recovery tank supplied as standard. - Pressure control. - Made of "food" materials that do not undergo any alteration in contact with orange juice. - Designed for easy maintenance, exterior and interior.
%
best price peelerPeeler designed for quick work with minimal waste (50 to 200 covers)Supplied on stainless steel base with filter basketMetal cover controlled by a security system.All stainless steel model with abrasive towerExclusively for peelingIncludes dry contacts for solenoid valve control (24 Volts/0.5 Amp.)TANK CAPACITY: 10 to 12 kgMAXIMUM FLOW: 280 kg/hWater savings achieved thanks to the solenoid valve system coordinating the water supply with the timer.Spraying of water above the...
%
2 drawers version GN 1/1 max. load Height 320 mm1 ventilated evaporator "treaty".4 adjustable stainless steel feet. Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools).TCompressor unit climate class 4 (30°C Temperature & 55% Humidity), ),...
%
- Production: 20/25 oranges (maximum diameter 80 mm) per minute.- Storage capacity: 12Kg.- Loading ramp and recovery tank supplied as standard. - Pressure control. - Made of "food" materials that do not undergo any alteration in contact with orange juice. - Designed for easy maintenance, exterior and interior.
%
Peeler best price.Peeler designed for fast work with minimal wasteSupplied on stainless steel base with filter basketMetal cover controlled by a security systemAll stainless steel model with abrasive towerExclusively for peelingIncludes dry contacts for solenoid valve control (24 Volts/0.5 Amp.)80 to 300 coversTANK CAPACITY: 15 to 18 kgMAXIMUM FLOW: 400 kg/hWater savings achieved thanks to the solenoid valve system coordinating the water supply with the timer.Spraying of water above the...
%
4 drawers version GN 1/1 (maximum height 100 mm).1 ventilated evaporator "treaty".4 adjustable stainless steel feet. Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools).Compressor unit climate class 4 (30°C Temperature & 55% Humidity), ),...
%
Production: 10/12 oranges (maximum diameter 70 mm) per minute.Storage capacity: 3 oranges.Loading ramp and recovery tank supplied as standard.Pressure control.Made of "food" materials that do not undergo any alteration in contact with orange juice.Designed for easy maintenance, exterior and interior.Automatic shutdown.
%
best price peelerAll stainless steel model with abrasive coating on the walls of the tankExclusively for peelingMetal cover fitted with a safety system.Supplied on stainless steel base with filter basket and new anti-foam system.New timer-controlled water flow control solenoid valve system. Includes dry contacts for solenoid valve control (24 Volts/0.5 Amp.)200 seats and moreTANK CAPACITY: 25kgMAXIMUM FLOW: 500 kg/hWater savings achieved thanks to the solenoid valve system coordinating the...
%
3 drawers version GN 1/1max. load Height 320 mm2 ventilated evaporators "treaty".6 adjustable stainless steel feet. Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools).Compressor unit climate class 4 (30°C Temperature & 55% Humidity), ), built...
%
- Production: 20/25 oranges (maximum diameter 80 mm) per minute. - Storage capacity: 12Kg. - Refrigerated storage of 7L.- Loading ramp, furniture (on wheels) and recovery bin supplied as standard. - Pressure control. - Made of "food" materials that do not undergo any alteration in contact with orange juice. - Designed for easy maintenance, exterior and interior.
%
%
6 drawers version GN 1/1 (maximum height 100 mm).2 ventilated evaporators "treaty".6 adjustable stainless steel feet. Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools).Compressor unit climate class 4 (30°C Temperature & 55% Humidity), ),...
%