15 levels, spaced 35 mm.Made in stained steel AISI 304.
Working capacity: • Large chute allowing the cutting of bulky vegetables such as cabbage, salad. Wide variety of cuts: • Complete range of 50 discs for sliced, crinkled, grated, sticks, strips and macedonia (from 5x5x5 mm to 25x25x25 mm) with precision and optimum cutting quality. • Device 1 speed of 375 rpm, ideal for cutting fragile products, macedonia and fries and guaranteeing a wide variety of slices, grated and julienne. • Device 2 speeds 375 and 750 rpm designed to reconcile cutting...
- Water condenser- Vertical turbine with automatic extraction.- Minimum mixing capacity 4 lit. and maximum 8 lit.- Noise level below 70 dB.- Vertical evaporator cylinders for a larger exchange surface.- Cycle with time control or temperature control.- Exclusive distribution device. - System self diagnosis. - Cycle time: 8/12 min. - Hourly production: 60 litres.NB: mainly for cold work.
Stainless steel construction.Capacity: 12 cups in 6 minutes.Automatic filling of the tank, direct connection to the water system or manual filling through the upper valve (equipped with a safety grid), tank capacity 2.2 liters (equipped with an overflow device).Ergonomic filter holder (Ø 90 mm), made of stainless steel and equipped with athermal handle.Spray nozzle for a better coffee infusion.To start the brewing process, switch "II" and then press the "Brew" button, the "Filling" and...
General characteristics:AISI 304 stainless steel finish, between 12/10 mm and 30/10 mm thick, double cavity for better thermal and acoustic insulation (-60dB), adjustable stainless steel feet.Linear or angular implantations with left and right entries.Traction system with parallel stainless steel bars.Automatic advance system with 3 speeds.Ability to perform a continuous, basket-by-basket or delayedwash."Reversible" traction system, right left entry.Counter balanced wide opening doors with...
Flow: 5000 m³/h. (with reduced pressure of 300 Pa).1220 r/min.Internal ventilator with double ventilation trench with belt.Produced in galvanized steel,Frame in aluminium profiles.Side inspection possible for After Sales Service .Internal soundproof-isolationEquipped with flexible cuffs against congestion and anti-vibration pads.Motor with 2 closed speeds, degree of protection: IP54 (max. temperature 80°C).
2 compressor groups and 2 evaporators, independent.Included: 2 x 2 grids GN2/1 (530x650 mm).Freezer: inner door fitted with warming resistance, copper coil evaporator, embedded in the walls (3 sides), manual defrost and depression valve, bottom fitted with a draining tap.4 adjustable stainless steel feet.Refrigerant gas R290 Interior and exterior made of stainless steel (food grade) AISI 304 (rear galvanized steel), monocoque frameStainless steel racks and slides (antitilt), allowing the...
Cutter in stained steel AISI 304.Nylon handle.
Working capacity: • Large chute allowing the cutting of bulky vegetables such as cabbage, salad. Wide variety of cuts: • Complete range of 50 discs for sliced, crinkled, grated, sticks, strips and macedonia (from 5x5x5 mm to 25x25x25 mm) with precision and optimum cutting quality. • Device 1 speed of 375 rpm, ideal for cutting fragile products, macedonia and fries and guaranteeing a wide variety of slices, grated and julienne. • Device 2 speeds 375 and 750 rpm designed to reconcile cutting...
- Air condenser.- Vertical turbine with automatic extraction, low maintenance and very easy to use.- Easy installation due to its compact size.- Minimum mixing capacity 1 liter and maximum 2 liters.- Noise level below 70 dB.- Cycle with time control or with temperature control.- Vertical cylinders-evaporators for a bigger surface of exchange.- Exclusive dispensing device.- Auto diagnostic system.- Cycle time: 10/20 min.- Hourly production: 12 liters.NB: mainly for cold work.
Stainless steel construction.Capacity: 12 cups in 6 minutes.Manual filling (cold water) of the tank through the upper valve (equipped with a safety grid), tank capacity 2,2 liters (equipped with an overflow device).Ergonomic filter holder (Ø 90 mm), made of stainless steel and equipped with an athermic handle.Spray nozzle for a better coffee infusion.To start the brewing process, switch "II", the indicator light (Brewing) lights up to indicate the cycle in progress.Switch " I " to control the...
Variable speed (Min. 65 rpm & Max. 551 rpm), with Inverter.Timer from 0 to 30 minutes or continuousStandard accessories: whisk, spatula, hook and 60 L stainless steel tank.High" versions on base.Very robust frame in painted steel (epoxy), upper cover in ABS, 4 lower cylinders for levellingRaising and lowering the tank with lever.Automatic locking of the tank in working position.Protection grid (and screws) in stainless steel, with safety device by microswitch.All parts in contact with the...
