Supplied with one LED lamp (21 Watt). Made of polycarbonate.Conceived for temperatures max. 40°C .Lower hiding place transparent fixed with clips facilitating the dismantling for the maintenance.Protection class IP65
Included: 20 pairs of slides (600x800 mm) by door.4 adjustable stainless steel feet.Cooling gas R290.Manufactured in stainless steel AISI 304, inside and outside (back in galvanized steel), monocoque frame.Stainless steel racks and slides (anti-tilting), allowing to place the plates as one pleases, stamped interior bottom, rounded angles and corners (without roughness).Doors with ergonomic handle (no salient) and reversible, closed by magnetic seal with "3 compartments" (easy replacement...
Compact, but with a large cutting capacity, realized in anodized and polished aluminum alloy.Sanitary polished and anodized aluminium alloy, hardened, chromed stainless blade, permanent tapered blade ring guard and interlocked blade guard (100% safe).Reinforced gauge plate, max. cutting capacity 250xh185 (Ø 210 mm) slice thickness 0-13 mm.Carriage sliding on stainless bearings for an easy and quiet operation, a plexiglass hand guard comes standard.Stainless steel screws and...
Supplied with one LED lamp (42 Watt). Made of polycarbonate.Conceived for temperatures max. 40°C .Lower hiding place transparent fixed with clips facilitating the dismantling for the maintenance.Protection class IP65
Cooling capacity rendered 3389 (W/f) for chamber volume 37,6 m³ / 37600 Lit. (T° internal 0° C & T° external +32° C).Refrigerant expansion by capillary. "Overlapping" refrigeration units.Unit certified in climatic class 5 (40°C Temperature - 40% Humidity).All units are supplied as standard with a high pressure switch and KVL valve.Automatic hot gas defrost with self-evaporation and overflow.The evaporator drain pipe is equipped with a resistor to prevent ice formation. Refrigerant gas...
Compact machine but with an important cutting capacity.Hardened, chrome-plated and ground steel blade (Ø 300 mm), fixed protection ring and blade cover with microswitch (100% safety).Sliding of the carriage on self-lubricating bushings and ground pins.Stainless steel screws.Built-in aluminium sharpener with 2 emery wheels. On/off switch, protection class IP 44.Ventilated motor, lower protection, with direct access to the electrical elements, sealing ring on the transmission pulley,...
Supplied with one LED lamp (52 Watt). Made of polycarbonate.Conceived for temperatures max. 40°C .Lower hiding place transparent fixed with clips facilitating the dismantling for the maintenance.Protection class IP65
Unit width 400 mm, small footprint.Cooling capacity rendered 975 (W/f) for chamber volume 6 m³ / 6000 Lit. (T° internal 0° C & T° external +32° C).Refrigerant expansion by capillary. "Overlapping" refrigeration units.Unit certified in climatic class 5 (40°C Temperature - 40% Humidity).All units are supplied as standard with a high pressure switch and KVL valve.Automatic hot gas defrost with self-evaporation and overflow.The evaporator drain pipe is equipped with a resistor to prevent ice...
Gravity feed, 38° inclination.Max. cutting capacity 230xh175 (Ø 200 mm), slice thickness 0-30 mm.41 mm gap between blade and body. Stylish and performing, sanitary polished and anodized aluminium alloy, hardened, chromed stainless blade, permanent tapered blade ring guard and interlocked blade guard (100% safe).Reinforced gauge plate, removable slider guard.Carriage sliding on stainless bearings for an easy and quiet operation, polished, chromed and hardened sliding bar, vulcanized rubber...
6 stainless steel filters "labyrinth" 400x400 mm. Manufactured in stainless steel 18/10 AISI 304.Invisible sides in stainlees steel AISI 430.Sides "point" welded.Peripherically welded fat catching canal.Evacuation tap beneath.Built-in LED lighting type "IP65".
Unit width 400 mm, small footprint.Cooling capacity rendered 1302 (W/f) for chamber volume 10,6 m³ / 10600 Lit. (T° internal 0° C & T° external +32° C).Refrigerant expansion by capillary. "Overlapping" refrigeration units.Unit certified in climatic class 5 (40°C Temperature - 40% Humidity).All units are supplied as standard with a high pressure switch and KVL valve.Automatic hot gas defrost with self-evaporation and overflow.The evaporator drain pipe is equipped with a resistor to prevent...
Version with vertical blade.Double-feed carriage with a clamping arm holding firmly in place all cold meats.Cutting capacity 275 mm, plate 275xh260 mm.Cutting thickness 0-30 mm. Rounded design, no corners and sharp edges and no visible screws.Blade (Ø 300 mm) made of hardened steel, chrome and improved, tapered blade ring guard and interlocked blade guard (100% safe).Ashes of the cutting carriage in chrome, improved and polished.Carriage sliding on stainless bearings for an easy and quiet...
6 stainless steel filters "labyrinth" 500x400 mm. Manufactured in stainless steel 18/10 AISI 304.Invisible sides in stainlees steel AISI 430.Sides "point" welded.Peripherically welded fat catching canal.Evacuation tap beneath.Built-in LED lighting type "IP65".
Interior volume (gross) 1250 liters.Internal dimensions: 740x920xh1850 mm.For trolley GN2/1 (or) EN 600x800 Max. Height 1830mm (not included).Refrigerant gas R290.Interior and exterior made of stainless steel (food grade) AISI 304 (rear galvanized steel), monocoque frameFlat floor in AISI 304 stainless steel, rounded corners and corners (without rough edges)Door with ergonomic (not protruding) and reversible handle, closing by "triple chamber" and magnetic seal (easy replacement, without...
Made of "anodized aluminum", food treated.Blade in stainless steel AISI 304.Sliding carriage with transparent Plexiglas protection.Cutting capacity : 200x260 mm.Sharpening device, delivered separately, with adapter.Cutting adjustment from 0-15 mm.Easily removable blade guard.No volt release" device that prevents the machine from starting during the cleaning phase.Low voltage control 24 V, protection class IP65.Safety microswitch on the blade.Blade cover ring (100% protection).The machine is...
6 stainless steel filters "labyrinth" 400x400 mm. Manufactured in stainless steel 18/10 AISI 304.Invisible sides in stainlees steel AISI 430.Sides "point" welded.Peripherically welded fat catching canal.Evacuation tap beneath.Built-in LED lighting type "IP65".
Interior volume (gross) 2500 liters.Internal dimensions 1640x920xh1850 mm.For trolley GN2/1 (or) EN 600x800 Max. Height 1830mmNB: trolley not included.Refrigerant gas R290.Interior and exterior made of stainless steel (food grade) AISI 304 (rear galvanized steel), monocoque frameFlat floor in AISI 304 stainless steel, rounded corners and corners (without rough edges)Door with ergonomic (not protruding) and reversible handle, closing by "triple chamber" and magnetic seal (easy replacement,...
For each and every product such as ham, sausage, raw meat, cheese.Automatic carriage motion with variable speed control (it can be used manually as well).Independent controls for carriage motion and blade.Exclusive designed carriage with a special end weight and an adjustable vertical product fence to provide stability and advance products_backup_1_1 evenly.Stainless steel base.Oblique blade, 35° inclination (a blade extractor comes standard).Max. cutting capacity: 270xh230 (Ø 255 mm), slice...
6 stainless steel filters "labyrinth" 500x400 mm. Manufactured in stainless steel 18/10 AISI 304.Invisible sides in stainlees steel AISI 430.Sides "point" welded.Peripherically welded fat catching canal.Evacuation tap beneath.Built-in LED lighting type "IP65".
"Digital " electronic microprocessor (in closed box, 100% waterproof IP65) programmable at choice (including all HACCP functions), display on the front side4 choices of cycles " Soft Chill " or " Soft Freeze " for sensitive products_backup_1_1, " Hard-Chill " or " Hard-Freeze " for big pieces, control by timer with a bell at the end of the cycle (or) control by core probe, hold function at the end of the cycle and an alarm device (acoustic & visual)Stamped inside bottom, angles and...
Vertical, straight-blade slicer.Double-feed carriage with a clamping arm holding firmly in place all types of hams and cold meats.Max. cutting capacity: 270xh250 (Ø 250 mm), slice thickness: 0-30 mm.50 mm gap between blade and body. Sturdy, stylish and performing, sanitary polished and anodized aluminium alloy, hardened, chromed stainless blade, permanent tapered blade ring guard and interlocked blade guard (100% safe).Reinforced gauge plate, removable slider guard.A maintenance Kit comes...
6 stainless steel filters "labyrinth" 400x400 mm. Manufactured in stainless steel 18/10 AISI 304.Invisible sides in stainlees steel AISI 430.Sides "point" welded.Peripherically welded fat catching canal.Evacuation tap beneath.Built-in LED lighting type "IP65".
" Digital " electronic microprocessor (in closed box, 100% waterproof IP65) programmable at choice (including all HACCP functions), display on the front side4 choices of cycles " Soft Chill " or " Soft Freeze " for sensitive products_backup_1_1, " Hard-Chill " or " Hard-Freeze " for big pieces, control by timer with a bell at the end of the cycle (or) control by core probe, hold function at the end of the cycle and an alarm device (acoustic & visual)Stamped inside bottom, angles and...