%
Frame in galvanized steel.Soundproof isolation.
%
Frame in galvanized steel.Soundproof isolation.
%
Frame in galvanized steel.Soundproof isolation.
%
Frame in galvanized steel.Soundproof isolation.
%
Frame in galvanized steel.Soundproof isolation.
%
Frame in galvanized steel.Soundproof isolation.
%
Frame in galvanized steel.Soundproof isolation.
%
Profile frame in aluminium.Panels with isolated double wall.Lateral inspection.Ventilator with direct suction.3 double filtering.
%
Profile frame in aluminium.Panels with isolated double wall.Lateral inspection.Ventilator with direct suction.3 double filtering.
%
Flow rate: 3000 m³/o. (Pressure drop 380 Pa). Centrifugal double-inlet ventilation units with built-in motor (operating temperature/resistance: -20° to 40°).Enclosed motor, IP54 protection rating.Galvanized steel casing with 5 mm internal sound insulation (polyurethane foam).Side inspection for after-sales service (S.A.V.).
%
Flow rate: 4500 m³/o. (Pressure drop 220 Pa). Centrifugal double-inlet ventilation units with built-in motor (operating temperature/resistance: -20° to 40°).Enclosed motor, IP54 protection rating.Galvanized steel casing with 5 mm internal sound insulation (polyurethane foam).Side inspection for after-sales service (S.A.V.).
%
Flow rate: 1300 m³/o. (Pressure drop 200 Pa). Centrifugal double-inlet ventilation units with built-in motor (operating temperature/resistance: -20° to 40°).Enclosed motor, IP54 protection rating.Galvanized steel casing with 5 mm internal sound insulation (polyurethane foam).Side inspection for after-sales service (S.A.V.).
%
Flow rate: 2500 m³/o. (Pressure drop 210 Pa). Centrifugal double-inlet ventilation units with built-in motor (operating temperature/resistance: -20° to 40°).Enclosed motor, IP54 protection rating.Galvanized steel casing with 5 mm internal sound insulation (polyurethane foam).Side inspection for after-sales service (S.A.V.).
%
Single-Phase Version.Pre-cut air inlet with a diameter of 250 mm.Airflow: 2200 m³/h (pressure drop: 200 Pa). Centrifugal single-inlet ventilation units with built-in motor (operating temperature/resistance: -20° +110°).Aluminum profiles and cladding panels made of galvanized "sandwich" type sheets with 20mm acoustic insulation (polyurethane foam).Panel with handle for easy access to the impeller for maintenance.Open motor access area for after-sales service inspection.Closed motor, IP54...
%
Single-Phase Version.Pre-cut air inlet with a diameter of 250 mm.Airflow: 3200 m³/h (pressure drop: 200 Pa). Centrifugal single-inlet ventilation units with built-in motor (operating temperature/resistance: -20° +110°).Aluminum profiles and cladding panels made of galvanized "sandwich" type sheets with 20mm acoustic insulation (polyurethane foam).Panel with handle for easy access to the impeller for maintenance.Open motor access area for after-sales service inspection.Closed motor, IP54...
%
Single-Phase Version.Pre-cut air inlet with a diameter of 315 mm.Airflow: 4200 m³/h (pressure drop: 200 Pa). Centrifugal single-inlet ventilation units with built-in motor (operating temperature/resistance: -20° +110°).Aluminum profiles and cladding panels made of galvanized "sandwich" type sheets with 20mm acoustic insulation (polyurethane foam).Panel with handle for easy access to the impeller for maintenance.Open motor access area for after-sales service inspection.Closed motor, IP54...
%
Single-Phase Version.Pre-cut air inlet with a diameter of 350 mm.Airflow: 5600 m³/h (pressure drop: 200 Pa). Centrifugal single-inlet ventilation units with built-in motor (operating temperature/resistance: -20° +110°).Aluminum profiles and cladding panels made of galvanized "sandwich" type sheets with 20mm acoustic insulation (polyurethane foam).Panel with handle for easy access to the impeller for maintenance.Open motor access area for after-sales service inspection.Closed motor, IP54...
%
%
"Wall" model with back board.Glass doors with integrated LED-light.1 ventilated evaporator.Included: 1 grid GN 1/1 (530x325 mm), by door.4 adjustable stainless steel feet.Monocoque designManufactured in stainless steel, inside AISI 304, outside AISI 441.Independent upper top (dismountable), stainless steel AISI 304.Stainless steel rack and slides (anti-tilting), allowing to place the grids as one pleases.Stamped interior bottom, rounded angles and corners (without rougness).Doors with...
%
- 4 independent plates, Ø 180 mm (4x 2 kW). - Electric convection oven GN 2/3 (3 kW), 370x340xh325 mm.- " Deep-drawn " upper top. - Made of AISI 304 stainless steel, adjustable stainless steel feet. - The oven enclosure and the double-walled door are provided with thermal insulation. Oven door on spring hinges, stainless steel handle. - Cast iron plates, Ø 180 mm with stainless steel sealing edge. Heating power regulation by means of a 6-position switch. - Electric convection oven (GN),...
%
- 4 independent plates, Ø 180 mm (4x 2 kW). - Electric convection oven GN 2/3 (3 kW), 370x340xh325 mm.- " Deep-drawn " upper top. - Made of AISI 304 stainless steel, adjustable stainless steel feet. - The oven enclosure and the double-walled door are provided with thermal insulation. Oven door on spring hinges, stainless steel handle. - Cast iron plates, Ø 180 mm with stainless steel sealing edge. Heating power regulation by means of a 6-position switch. - Electric convection oven (GN),...
%
- 5 independent plates, Ø 180 mm (5x 2 kW). - Electric convection oven GN 1/1 (3 kW), 530x340xh325 mm.- " Deep-drawn " upper top. - Made of AISI 304 stainless steel, adjustable stainless steel feet. - The oven enclosure and the double-walled door are provided with thermal insulation. Oven door on spring hinges, stainless steel handle. - Cast iron plates, Ø 180 mm with stainless steel sealing edge. Heating power regulation by means of a 6-position switch. - Electric convection oven (GN),...
%
- 5 independent plates, Ø 180 mm (5x 2 kW). - Electric convection oven GN 1/1 (3 kW), 530x340xh325 mm.- " Deep-drawn " upper top. - Made of AISI 304 stainless steel, adjustable stainless steel feet. - The oven enclosure and the double-walled door are provided with thermal insulation. Oven door on spring hinges, stainless steel handle. - Cast iron plates, Ø 180 mm with stainless steel sealing edge. Heating power regulation by means of a 6-position switch. - Electric convection oven (GN),...
%
- 4 separate hobs (4x 2,6 kW).- Electric convection oven 5xGN 1/1 (3,96 kW), dimensions 530x340xh325 mm.- Manufactured in stainless steel 18/10 AISI 304, adjustable legs of stainless steel.- Oven room and double glazed door provided with thermic spun glass isolation. Hinged oven door with spring system, grip in stainless steel.- Hobs of cast iron, 220 mm diameter, with closing borders of stainless steel. Power regulation through a switch with 6 positions.- Electric convection oven GN 1/1,...