%
Autonomous working.Manufactured in aluminium and ABS, collecting tray in food PVC.Stainless steel bowl (3 Lit.)Engine (800 rpm) with reduction gearbox (not direct)Lid with safety microswitch device.Control device for the ice thickness.
%
Variable speed (from 35 to 60 movements per minute)Production capacity 5 to 23 kg (40 Lt)Flour capacity 3 to 15 kgTimer supplied as standardTank Ø 425xh295 mmAnalog control panel with low voltage 24 V (IP55).Traction by gears made of nylon (high hardness), very quiet operation.All moving parts are mounted on spherical bearingsEmergency stop button type "punch".Frame in epoxy painted steel, very thick.Tank, plunging arms in thick AISI 304 stainless steel.Protective plexiglass, with safety...
%
2 drawers version GN 1/2+1/3 (maximum height 320 mm).1 ventilated evaporator "treaty".4 adjustable stainless steel feet. Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools).Compressor unit climate class 4 (30°C Temperature & 55% Humidity), ),...
%
Inside dimensions: 855x885xh1762.Big dimensions door: 855xh1810.Included: 2 grids in stainless steel tube (830x820 mm). Dismountable structure, locking of the panels by built-in "eccentric" hooks.Inside and outside realization in steel sheet (pre-painted), angles and corners without bumps.Stainless steel floor.Strong-built grids in stainless steel tube (20 mm) melted, stainless steel racks (anti-swinging).Reversible door, built-in handle (not outstanding), magnetic joint (easy replacement,...
%
Turns/minute: 15000 rpm.On/Off switch, stainless steel screws.. ABS molded body, inner stainless steel and aluminium structure, polished aluminium hopper, 2 liters receiving receptacle en ABS molded.. Fitted with safety microswitch on hopper lever and receiving receptacle, fitted with thermal motor relay.. Sturdy belt-driven transmission, minimal power loss.. The equipment is manufactured following the (CE) standards in force.
%
2 speeds (40 to 60 movements per minute)Production capacity 5 to 40 kg (70 Lt)Flour capacity 3 to 25 kgTimer supplied as standardAdjustable right armTank Ø 530xh320 mmAnalog control panel with low voltage 24 V (IP55).Adjustable plunging arm (the one on the right).Gear drive made of treated and ground cast iron, self-lubricating, perfectly sealed gearbox, very quiet operation.Emergency stop button type "punch".Frame in epoxy painted steel, very thick.Tank, plunging arms in thick AISI 304...
%
Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools).Compressor unit climate class 4 (30°C Temperature & 55% Humidity), ), built into the cabinet (right), ventilated condenser.Frontal accessibility of the compressor group, easy...
%
%
Variable speed (40 to 60 movements per minute)Production capacity 5 to 40 kg (70 Lt)Flour capacity 3 to 25 kgTimer supplied as standardAdjustable right armTank Ø 530xh320 mmAnalog control panel with low voltage 24 V (IP55).Adjustable plunging arm (the one on the right).Gear drive made of treated and ground cast iron, self-lubricating, perfectly sealed gearbox, very quiet operation.Emergency stop button type "punch".Frame in epoxy painted steel, very thick.Tank, plunging arms in thick AISI 304...
%
2 drawers version GN 1/1max. load Height 320 mm1 ventilated evaporator "treaty".4 adjustable stainless steel feet. Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools), electrical resistance against the door, allowing the opening of the...
%
Inside dimensions: 855x885xh1912.Big dimensions door: 855xh1960.Included: 3 grids in stainless steel tube (830x820 mm).Dismountable structure, locking of the panels by built-in "eccentric" hooks.Inside and outside realization in steel sheet (pre-painted), angles and corners without bumps.Stainless steel floor.Strong-built grids in stainless steel tube (20 mm) melted, stainless steel racks (anti-swinging).Reversible door, built-in handle (not outstanding), magnetic joint (easy replacement,...
%
Variable speed (from 35 to 60 movements per minute)Production capacity 5 to 45 kg (65 Lt)Flour capacity 3 to 25 kgTimer supplied as standardTank Ø 500xh340 mmAnalog control panel with low voltage 24 V (IP55).Traction by gears made of nylon (high hardness), very quiet operation.All moving parts are mounted on spherical bearingsEmergency stop button type "punch".Frame in epoxy painted steel, very thick.Tank, plunging arms in thick AISI 304 stainless steel.Protective plexiglass, with safety...
%
3 drawers version max. load Height 320 mm.2 ventilated evaporator "treaty".6 adjustable stainless steel feet. Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools), electrical resistance against the door, allowing the opening of the...
%
%
Inside dimensions: 980x620xh980.Capacity barrels Ø 425 mm (2x 50 liters - 4x 30 liters).Dismountable structure, locking of the panels by built-in "eccentric" hooks.Inside and outside realization in steel sheet (pre-painted), angles and corners without bumps.Stainless steel floor.Doors with built-in handle (not outstanding), magnetic joint (easy replacement, without any tools).Polyurethane insulation without CFC.Adjustable jacks for leveling.Appliances are complied with the CE in force.
%
Variable speed (35 to 60 movements per minute)Production capacity 5 to 60 kg (92 Lt)Flour capacity 3 to 40 kgTimer supplied as standardAdjustable right armTank Ø 550xh390 mmAnalog control panel with low voltage 24 V (IP55).Adjustable plunging arm (the one on the right).Gear drive made of treated and ground cast iron, self-lubricating, perfectly sealed gearbox, very quiet operation.Emergency stop button type "punch".Frame in epoxy painted steel, very thick.Tank, plunging arms in thick AISI 304...
%
2 drawers version GN 1/1 max. load Height 320 mm1 ventilated evaporator "treaty".4 adjustable stainless steel feet. Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools).TCompressor unit climate class 4 (30°C Temperature & 55% Humidity), ),...
%
- Inside dimensions: 980x885xh980.- Capacity barrels Ø 425 mm (4x 50 liters - 8x 30 liters).- Dismountable structure, locking of the panels by built-in "eccentric" hooks. - Inside and outside realization in steel sheet (pre-painted), angles and corners without bumps.- Stainless steel floor.- Doors with built-in handle (not outstanding), magnetic joint (easy replacement, without any tools). - Polyurethane insulation without CFC.- Adjustable jacks for leveling. - Appliances are complied with...
%
2 speeds (Fork: 1st Speed 19 rpm and 2nd Speed 27 rpm) & (Tank: 1st Speed 6 rpm and 2nd Speed 10 rpm)Timer timerSpiral diameter 27 mmDiameter of the tank 580 mm height 230 mm (40 litres) = 35 kg of dough.Comes standard with wheels, 2 of which are equipped with brakes.Optional: scraper in tank, in stainless steel and polyethylene.Analog control panel with low voltage 24V.2-speed motor, gearbox drive (independent tank and fork), self-lubricating, pulley transmission, very quiet...
%
4 drawers version GN 1/1 (maximum height 100 mm).1 ventilated evaporator "treaty".4 adjustable stainless steel feet. Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools).Compressor unit climate class 4 (30°C Temperature & 55% Humidity), ),...
%
%
%
3 drawers version GN 1/1max. load Height 320 mm2 ventilated evaporators "treaty".6 adjustable stainless steel feet. Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools).Compressor unit climate class 4 (30°C Temperature & 55% Humidity), ), built...