%
Charging height glasses 250 mm. 30 baskets/hour,120-second cycle.Rotating wash (lower) and rinse arms (upper and lower).Self-cleaning sprinklers.Tank, rounded edges (7 Lit., 0,6 kW).Stamped walls.Double walled door.Removable control panel.Automatic filling of the tank.Check valve.Hot water rinse (water consumption per cycle 2 liters), boiler (pressure) in stainless steel (2 Lit., 2,6 kW).Micro switch, when the door opens.Safety thermostat.Manufactured in stainless steel AISI 304.Standard: 2...
%
Wall-mounted" version with raised rear edgeIncluded: 2 grids (405x460 mm), with slides4 adjustable stainless steel feet. Monobloc structure, made inside and outside (including the back) of austenitic stainless steel (food-grade), top (40 mm).Embossed interior bottom, with a large maintenance drain plug, rounded corners (smooth), stainless steel racks and slides (anti-tilt).Doors with flush-mounted handles (non-protruding), magnetic seal (easy replacement without tools), hinges with automatic...
%
Manufactured entirely in stainless steel.This machine has been produced for a pasta production with raw materials like farina type 00, adding eggs and/or water and even spinach for green pasta or tomatoes for red pasta.Basically, it allows to mould pasta (capacity of the basin: 2 kg farina), as well as automatic production of pasta (hard semolina) (production 6 kg/h).Knife for automatic cutting of short or long pasta.Adjustable velocity.Standard delivered with 4 matrixes.n° 7 (1,5 mm) for...
%
"Wall" model with back board.1 ventilated evaporator.Included: 1 grid GN 1/1 (530x325 mm), by door.4 adjustable stainless steel feet.Monocoque designManufactured in stainless steel, inside AISI 304, outside AISI 441.Independent upper top (dismountable), stainless steel AISI 304.Stainless steel rack and slides (anti-tilting), allowing to place the grids as one pleases.Stamped interior bottom, rounded angles and corners (without roughness).Doors with ergonomic handle (no salient) and reversible...
%
Refregiration unit on the left side"Wall" model with back board.1 ventilated evaporator.Included: 1 grid GN 1/1 (530x325 mm), by door.4 adjustable stainless steel feet.Monocoque designManufactured in stainless steel, inside AISI 304, outside AISI 441.Independent upper top (dismountable), stainless steel AISI 304.Stainless steel rack and slides (anti-tilting), allowing to place the grids as one pleases.Stamped interior bottom, rounded angles and corners (without roughness).Doors with ergonomic...
%
Cooling capacity rendered 633 (W/f) for chamber volume 3,0 m³ / 3000 Lit. (T° internal -20° C & T° external +32° C).Refrigerant expansion by thermostatic valve.The low temperature units (HN) are supplied with a cable for the connection of the door resistor. Bi-block" refrigeration units.Due to its design, the condensing unit is suitable for outdoor installation and can be placed anywhere, floor, ceiling, wall,...Delivered with 2 wall brackets as standard. Pipes (pre-loaded) and cables are...
%
Cooling capacity rendered 824 (W/f) for chamber volume 5,0 m³ / 5000 Lit. (T° internal -20° C & T° external +32° C).Refrigerant expansion by thermostatic valve.The low temperature units (HN) are supplied with a cable for the connection of the door resistor. Bi-block" refrigeration units.Due to its design, the condensing unit is suitable for outdoor installation and can be placed anywhere, floor, ceiling, wall,...Delivered with 2 wall brackets as standard. Pipes (pre-loaded) and cables are...
%
Cooling capacity rendered 1258 (W/f) for chamber volume 10,2 m³ / 10200 Lit. (T° internal -20° C & T° external +32° C).Refrigerant expansion by thermostatic valve.The low temperature units (HN) are supplied with a cable for the connection of the door resistor. Bi-block" refrigeration units.Due to its design, the condensing unit is suitable for outdoor installation and can be placed anywhere, floor, ceiling, wall,...Delivered with 2 wall brackets as standard. Pipes (pre-loaded) and cables...
%
Cooling capacity rendered 1509 (W/f) for chamber volume 13,2 m³ / 13200 Lit. (T° internal -20° C & T° external +32° C).Refrigerant expansion by thermostatic valve.The low temperature units (HN) are supplied with a cable for the connection of the door resistor. Bi-block" refrigeration units.Due to its design, the condensing unit is suitable for outdoor installation and can be placed anywhere, floor, ceiling, wall,...Delivered with 2 wall brackets as standard. Pipes (pre-loaded) and cables...
%
Cooling capacity rendered 2313 (W/f) for chamber volume 27,8 m³ /27800 Lit. (T° internal -20° C & T° external +32° C).Refrigerant expansion by thermostatic valve.The low temperature units (HN) are supplied with a cable for the connection of the door resistor. Bi-block" refrigeration units.Due to its design, the condensing unit is suitable for outdoor installation and can be placed anywhere, floor, ceiling, wall,...Delivered with 2 wall brackets as standard. Pipes (pre-loaded) and cables...
%
Cooling capacity 2139 (W/f) for room volume 18,1 m³ / 18100 Lit (T° internal 0° C & T° external +32° C).Refrigerant expansion by thermostatic valve. Bi-block" refrigeration units.Due to its design, the condensing unit is suitable for outdoor installation and can be placed anywhere, floor, ceiling, wall,...Delivered with 2 wall brackets as standard. Pipes (pre-loaded) and cables are supplied for connection within a radius of 5 meters (10 meters optional).All units are supplied as standard...
%
Cooling capacity 3490 (W/f) for room volume 34,3 m³ / 34300 Lit (T° internal 0° C & T° external +32° C).Refrigerant expansion by thermostatic valve.Also equipped with a high pressure switch (fixed calibration) (C-PMAX-R). Bi-block" refrigeration units.Due to its design, the condensing unit is suitable for outdoor installation and can be placed anywhere, floor, ceiling, wall,...Delivered with 2 wall brackets as standard. Pipes (pre-loaded) and cables are supplied for connection within a...
%
Cooling capacity 981 (W/f) for room volume 6,2 m³ / 6200 Lit (T° internal 0° C & T° external +32° C).Refrigerant expansion by capillary. Bi-block" refrigeration units.Due to its design, the condensing unit is suitable for outdoor installation and can be placed anywhere, floor, ceiling, wall,...Delivered with 2 wall brackets as standard. Pipes (pre-loaded) and cables are supplied for connection within a radius of 5 meters (10 meters optional).All units are supplied as standard with a high...
%
Cooling capacity 1800 (W/f) for room volume 14,9 m³ / 14900 Lit (T° internal 0° C & T° external +32° C).Refrigerant expansion by capillary. Bi-block" refrigeration units.Due to its design, the condensing unit is suitable for outdoor installation and can be placed anywhere, floor, ceiling, wall,...Delivered with 2 wall brackets as standard. Pipes (pre-loaded) and cables are supplied for connection within a radius of 5 meters (10 meters optional).All units are supplied as standard with a...
%
Wall-mounted" version with raised rear edge.Included: 2 GN grids (325x535 mm), with guides.4 adjustable stainless steel feet. Monobloc structure, made inside and outside (including the rear) of austenitic stainless steel (food-grade), top (40 mm).Interior bottom is embossed, with a large maintenance drain plug, rounded corners (without roughness), stainless steel grids and guides (anti-tilting).Doors with recessed handles (non-protruding), magnetic seal (easy replacement without tools),...
%
Wall-mounted version with raised rear edgeIncluded: 1 grid GN1/1 (530x325mm), per door4 adjustable stainless steel feet.Can be installed on a base.Interior and exterior made of AISI 304 stainless steel (food grade), monocoque frameIndependent top (removable), in stainless steel (food grade) AISI 304Stainless steel racks and slides (antitilt), allowing the grids to be positioned as desired, deep-drawn inner bottom and rounded corners and angles (without rough edges)Doors with ergonomic (not...
%
%
Refrigeration unit positioned on the left.Wall-mounted version with raised rear edge.Included: 1 grid GN1/1 (530x325mm), per door.4 adjustable stainless steel feet.Can be installed on a base.Interior and exterior made of AISI 304 stainless steel (food grade), monocoque frameIndependent top (removable), in stainless steel (food grade) AISI 304Stainless steel racks and slides (antitilt), allowing the grids to be positioned as desired, deep-drawn inner bottom and rounded corners and angles...
%
Wall" version with raised rear edge 100-150 mm "straight".Top with 50 mm edge (15/10th)Included: 4 pairs of slides for 600x400 mm plates, per door4 adjustable stainless steel feet.Can be installed on a base.Interior and exterior made of AISI 304 stainless steel (food grade), monocoque frameIndependent top top (removable), in stainless steel (food grade) AISI 304Stainless steel racks and slides (maximum capacity 8 slides, spacing 68 mm), allowing the plates to be positioned as desired,...
%
Sink 340x400x200mm integrated in the work top (right side), delivered with a siphon; drain screen and overflow (NB: tap on request, opening on the work top (27 mm)."Wall" model with turned-up back edge.1 ventilated evaporator.Included: 1 grid GN 1/1 (530x325 mm), per door.4 adjustable stainless steel feet.Monocoque designManufactured in stainless steel, inside AISI 304, outside AISI 441.Independent upper top (dismountable), stainless steel AISI 304.Stainless steel rack and slides...
%
%