%
Mixer with big flow: 35 liters/min.Output one hole 3/4" (Ø 29 mm).Wall attachment 115 mm.Flexible 1200-mm length.Flow of the nozzle 16 liters/min.
%
Flow rate (pressure 3 bar) tap 8 litres/minute, hand shower 12 litres/minute.Standard non-return valve (EN 1717 Belgaqua standard).Hand shower hose 60 mm (DVGW standards).Single hole outlet Ø min.27/max.35, thread length 50 mm, flexible hose G 3/8 female.Maximum pressure 10 bar (recommended 1-6 bar) and maximum temperature 90°C bar (recommended 90°C).
%
%
Mixer with big flow: 30 lit./min.Swan neck tap Ø 20 mm.Sprinkler length 1000 mm, wall attachment.Faucet flow 10 lit./min.Output one hole attachment (Ø 35 mm).
%
Flow rate (pressure 3 bar) tap 45 litres/minute, hand shower 16 litres/minute.Non-return valve as standard (standard EN 1717 Belgaqua.)Wall bracket 150 mmGooseneck Ø 25 mm (L.250mm).Hand shower hose 1050 mm (DVGW standards).Single hole outlet Ø min.27/max.35, thread length 80 mm, hoses G 1/2 femaleMaximum pressure 6.5 bar and maximum temperature 65°C bar.
%
Tap, flow: 18 liters/min.Output one hole 3/4" (Ø 29 mm).Wall attachment 115 mm.Flexible 1050-mm length.Flow of the nozzle 16 liters/min.
%
" Digital " electronic microprocessor (in closed box, 100% waterproof IP65) programmable at choice (including all HACCP functions), display on the front side4 choices of cycles " Soft Chill " or " Soft Freeze " for sensitive products_backup_1_1, " Hard-Chill " or " Hard-Freeze " for big pieces, control by timer with a bell at the end of the cycle (or) control by core probe, hold function at the end of the cycle and an alarm device (acoustic & visual)Stamped inside bottom, angles and...
%
Fonctions :Possibility of inserting food having a temperature until 90° C.- Version NNC: 3 cycles personnalisables (software +3°C, hardware +3°C,maintenance), version BCC: 5 cycles personnalisables (software +3 or -18°C, hardware +3 or -18°C, maintenance), specific cycles for the ice cream.- Function CRUISE.- Function CCRT which considers the residual time remaining before the end of the cycle.- Function TURBO CCTC especially conceived for the continuously production.- Sensor with 3 probes...
%
Fonctions :Possibility of inserting food having a temperature until 90° C.- Version NNC: 3 cycles personnalisables (software +3°C, hardware +3°C,maintenance), version BCC: 5 cycles personnalisables (software +3 or -18°C, hardware +3 or -18°C, maintenance), specific cycles for the ice cream.- Function CRUISE.- Function CCRT which considers the residual time remaining before the end of the cycle.- Function TURBO CCTC especially conceived for the continuously production.- Sensor with 3 probes...
%
LENGTHWISE" cell for loading GN 1/3, 1/2, 2/3 and 1/1 plates.Load capacity: 6x GN1/1 or 5x 600x400mm.Production per cycle: 30Kg (+70° +3°) and 30Kg (+70° -18°).Chamber size: 505x705xh450mm.Core probe.Built-in compressor unit.NB: delivered without grids and GN plates. Interior and exterior construction in AISI 304 stainless steel, monobloc structure, expanded polyurethane insulation, CFC and HCFC-free, 60 mm thick, stainless steel feet.Speaker: rounded corners and angles without roughness....
%
LENGTHWISE" cell for loading GN 1/3, 1/2, 2/3 and 1/1 plates.Load capacity: 10x GN1/1 or 8x 600x400mm.Production per cycle: 50Kg (+70° +3°) and 50Kg (+70° -18°).Chamber size: 505x705xh900mm.Core probe.Built-in compressor unit.NB: delivered without grids and GN plates. Interior and exterior construction in AISI 304 stainless steel, monobloc structure, expanded polyurethane insulation, CFC and HCFC-free, 60 mm thick, stainless steel feet.Speaker: rounded corners and angles without roughness....
%
Cell for loading GN 2/1 (or GN 1/1).Load capacity: 10x GN2/1 or 8x 600x400mm.Production per cycle: 100Kg (+70° +3°) and 70Kg (+70° -18°).Chamber size: 670x843xh900mm.Core probe.Built-in compressor unit.NB: delivered without grids and GN plates. Interior and exterior construction in AISI 304 stainless steel, monobloc structure, expanded polyurethane insulation, CFC and HCFC-free, 60 mm thick, stainless steel feet.Speaker: rounded corners and angles without roughness. Deep-drawn bottom that...
%
LENGTHWISE" cell for loading GN 1/3, 1/2, 2/3 and 1/1 plates.Load capacity: 20x GN1/1 or 16x 600x400mm.Production per cycle: 100Kg (+70° +3°) and 85Kg (+70° -18°).Chamber size: 525x705xh1453mm.Core probe.Compressor unit not included.Trolley & charger 600x400 EURONORM (on request ref: AC/2P2...)NB: delivered without grids and GN plates. Interior and exterior construction in AISI 304 stainless steel, monobloc structure, expanded polyurethane insulation, CFC and HCFC-free, 60 mm thick,...
%
Cell for loading plates GN 2/1 (or GN 1/1).Load capacity: 20x GN2/1 or 16x 600x400mm.Production per cycle: 200Kg (+70° +3°) and 170Kg (+70° -18°).Chamber size: 780x946xh1850mm.Cell delivered disassembled.Core probe.Compressor unit not included.Trolley & charger 600x400 EURONORM (on request ref: AC/2P2...)NB: delivered without grids and GN plates. Interior and exterior construction in AISI 304 stainless steel, monobloc structure, expanded polyurethane insulation, CFC and HCFC-free, 60 mm...
%
Oven "LENGTHWISE" payload plates GN 1/3, 1/2, 2/3 and 1/1.Load capacity 30Kg.Lateral structures less than 65 mm "anti-tipping".Core temperature probe.Recessed nozzle with reel.Structure (Dx & Gx) 600x400 EURONORM (on request ref. AC/SE...)NB: delivered without grids and without GN plates. Inner and outer construction in stainless steel AISI 304, thermal insulation in ceramic fibre, control panel with stainless steel filter to prevent the components from getting dirty (ventilated panel),...
%
Oven "LENGTHWISE" payload plates GN 1/3, 1/2, 2/3 and 1/1.Load capacity 30Kg.Lateral structures less than 65 mm "anti-tipping".Core temperature probe.Recessed nozzle with reel.Structure (Dx & Gx) 600x400 EURONORM (on request ref. AC/SE...)NB: delivered without grids and without GN plates. Inner and outer construction in stainless steel AISI 304, thermal insulation in ceramic fibre, control panel with stainless steel filter to prevent the components from getting dirty (ventilated panel),...
%
Oven "LENGTHWISE" payload plates GN 1/3, 1/2, 2/3 and 1/1.Load capacity 50 Kg.Lateral structures less than 65 mm "anti-tipping".Core temperature probe.Recessed nozzle with reel.Structure (Dx & Gx) 600x400 EURONORM (on request ref. AC/SE...)NB: delivered without grids and without GN plates. Inner and outer construction in stainless steel AISI 304, thermal insulation in ceramic fibre, control panel with stainless steel filter to prevent the components from getting dirty (ventilated panel),...
%
Oven "LENGTHWISE" payload plates GN 1/3, 1/2, 2/3 and 1/1.Load capacity 50 Kg.Lateral structures less than 65 mm "anti-tipping".Core temperature probe.Recessed nozzle with reel.Structure (Dx & Gx) 600x400 EURONORM (on request ref. AC/SE...)NB: delivered without grids and without GN plates. Inner and outer construction in stainless steel AISI 304, thermal insulation in ceramic fibre, control panel with stainless steel filter to prevent the components from getting dirty (ventilated panel),...
%
Oven payload plates GN 2/1 (or GN 1/1).Load capacity 100 Kg.Lateral structures less than 65 mm "anti-tipping".Core temperature probe.Charger 600x400 EURONORM (on request ref : AC/P12...)NB: delivered without grids and without GN plates. Inner and outer construction in stainless steel AISI 304, thermal insulation in ceramic fibre, control panel with stainless steel filter to prevent the components from getting dirty (ventilated panel), stainless steel feet. Cooking chamber: fully welded,...
%
Oven payload plates GN 2/1 (or GN 1/1).Load capacity 100 Kg.Lateral structures less than 65 mm "anti-tipping".Core temperature probe.Charger 600x400 EURONORM (on request ref : AC/P12...)NB: delivered without grids and without GN plates. Inner and outer construction in stainless steel AISI 304, thermal insulation in ceramic fibre, control panel with stainless steel filter to prevent the components from getting dirty (ventilated panel), stainless steel feet. Cooking chamber: fully welded,...
%
Oven "LENGTHWISE" payload plates GN 1/3, 1/2, 2/3 and 1/1.Load capacity 30Kg.1 transfer cart and 1 detachable loader less than 65 mm "anti-tipping".Core temperature probe.Recessed nozzle with reel.Cart & charger 600x400 EURONORM (on request ref: AC/2P2...)Bottom closing plate integrated in the doorAdjustable stainless steel feetNB: delivered without grids and without GN plates. Inner and outer construction in stainless steel AISI 304, thermal insulation in ceramic fibre, control panel...
%
Oven "LENGTHWISE" payload plates GN 1/3, 1/2, 2/3 and 1/1.Load capacity 30Kg.1 transfer cart and 1 detachable loader less than 65 mm "anti-tipping".Core temperature probe.Recessed nozzle with reel.Cart & charger 600x400 EURONORM (on request ref: AC/2P2...)Bottom closing plate integrated in the doorAdjustable stainless steel feetNB: delivered without grids and without GN plates. Inner and outer construction in stainless steel AISI 304, thermal insulation in ceramic fibre, control panel...
%
Oven payload plates GN 2/1 (or GN 1/1).Load capacity 200 Kg.1 transfer cart and 1 detachable loader less than 65 mm "anti-tipping".Core temperature probe.Recessed nozzle with reel.Cart & charger 600x400 EURONORM (on request ref: AC/2P2...)Bottom closing plate integrated in the doorAdjustable stainless steel feetNB: delivered without grids and without GN plates. Inner and outer construction in stainless steel AISI 304, thermal insulation in ceramic fibre, control panel with stainless steel...
%
Oven payload plates GN 2/1 (or GN 1/1).Load capacity 200 Kg.1 transfer cart and 1 detachable loader less than 65 mm "anti-tipping".Core temperature probe.Recessed nozzle with reel.Cart & charger 600x400 EURONORM (on request ref: AC/2P2...)Bottom closing plate integrated in the doorAdjustable stainless steel feetNB: delivered without grids and without GN plates. Inner and outer construction in stainless steel AISI 304, thermal insulation in ceramic fibre, control panel with stainless steel...