%
Top in stainless steel of 1.5 mm thickness.Multiple spring system.Heating through resistance, adjustable thermostat going form 30°C to 120°C.Submerged control panel, spiral cable 1.5 m.4 swivel castors Ø 125.mm, 2 with brake.Handle and 4 angle shock absorbers, non marking.Manufactured in stainless steel AISI 304, double wall isolation.
%
Top in stainless steel of 1.5 mm thickness.Multiple spring system.Heating through resistance, adjustable thermostat going form 30°C to 120°C.Submerged control panel, spiral cable 1.5 m.4 swivel castors Ø 125 mm, 2 with brake.Handle and 4 angle shock absorbers, non marking.Manufactured in stainless steel AISI 304, double wall isolation.
%
- Air condenser.- Vertical turbine with automatic extraction.- Minimum mixing capacity 3 lit. and maximum 7 lit.- Noise level below 70 dB.- Vertical evaporator cylinders for a larger exchange surface.- Cycle with time control or temperature control.- Exclusive distribution device. - System self diagnosis.- Cycle time: 8/12 min.- Hourly production: 50 litres.NB: mainly for cold work
%
- Air condenser.- Vertical turbine with automatic extraction.- Minimum mixing capacity 3 lit. and maximum 7 lit.- Noise level below 70 dB.- Vertical evaporator cylinders for a larger exchange surface.- Cycle with time control or temperature control.- Exclusive distribution device. - System self diagnosis.- Cycle time: 8/12 min.- Hourly production: 50 litres.NB: mainly for cold work.
%
- Water condenser.- Vertical turbine with automatic extraction.- Minimum mixing capacity 3 lit. and maximum 7 lit.- Noise level below 70 dB.- Vertical evaporator cylinders for a larger exchange surface.- Cycle with time control or temperature control.- Exclusive distribution device. - System self diagnosis.- Cycle time: 8/12 min.- Hourly production: 50 litres.NB: mainly for cold work.
%
%
Version 2 drawers GN 1/1max. load Height 320 mm2 ventilated evaporators "treaty".6 adjustable stainless steel feet. Monocoque designInside and outside (top included) manufactured in stainless steel AISI 441 (also the back).Stamped interior bottom, rounded angles and corners (without roughness).Drawers with ergonomic handle, on telescopic slides, "snap-fit" closure by magnetic joint (easy replacement without tools).Compressor unit climate class 4 (30°C Temperature & 55% Humidity), ), built...
%
Version 4 drawers GN 1/1 (max. load Height 300 mm).2 ventilated evaporators "treaty".8 adjustable stainless steel feet. Monocoque design.Inside and outside (top included) manufactured in stainless steel AISI 304 (also the back).Stamped interior bottom, rounded angles and corners (no rough edges).Drawers with ergonomic handles, on telescopic runners, closed by magnetic pressure seals (easy replacement, no tools required).Class 5 compressor unit (40°C Temperature & 40% Humidity), built into...