%
- Air condenser.- Vertical turbine with automatic extraction.- Minimum mixing capacity 3 lit. and maximum 7 lit.- Noise level below 70 dB.- Vertical evaporator cylinders for a larger exchange surface.- Cycle with time control or temperature control.- Exclusive distribution device. - System self diagnosis.- Cycle time: 8/12 min.- Hourly production: 50 litres.NB: mainly for cold work
%
- Air condenser.- Vertical turbine with automatic extraction.- Minimum mixing capacity 3 lit. and maximum 7 lit.- Noise level below 70 dB.- Vertical evaporator cylinders for a larger exchange surface.- Cycle with time control or temperature control.- Exclusive distribution device. - System self diagnosis.- Cycle time: 8/12 min.- Hourly production: 50 litres.NB: mainly for cold work.
%
- Water condenser.- Vertical turbine with automatic extraction.- Minimum mixing capacity 3 lit. and maximum 7 lit.- Noise level below 70 dB.- Vertical evaporator cylinders for a larger exchange surface.- Cycle with time control or temperature control.- Exclusive distribution device. - System self diagnosis.- Cycle time: 8/12 min.- Hourly production: 50 litres.NB: mainly for cold work.
%
%
Included: 2 grids (405x460 mm), with slides4 adjustable stainless steel feet. Monobloc structure, made inside and outside (including the back) of austenitic stainless steel (food-grade), top (40 mm).Embossed interior bottom, with a large maintenance drain plug, rounded corners (smooth), stainless steel racks and slides (anti-tilt).Doors with flush-mounted handles (non-protruding), magnetic seal (easy replacement without tools), hinges with automatic return (locking at 90°).Compressor unit in...
%
1 ventilated evaporator.Included: 1 grid GN 1/1 (530x325 mm), by door.4 adjustable stainless steel feet.Monocoque designManufactured in stainless steel, inside AISI 304, outside AISI 441.Independent upper top (dismountable), stainless steel AISI 304.Stainless steel rack and slides (anti-tilting), allowing to place the grids as one pleases.Stamped interior bottom, rounded angles and corners (without roughness).Doors with ergonomic handle (no salient) and reversible (kit is not necessary),...
%
Refrigeration unit on the left side.1 ventilated evaporator.Included: 1 grid GN 1/1 (530x325 mm), by door.4 adjustable stainless steel feet.Conception MonocoqueManufactured in stainless steel, inside AISI 304, outside AISI 441.Independent upper top (dismountable), stainless steel AISI 304.Stainless steel rack and slides (anti-tilting), allowing to place the grids as one pleases.Stamped interior bottom, rounded angles and corners (without roughness).Doors with ergonomic handle (no salient) and...
%
Control panel TOUCH SCREENIntegrated washing system AUTO-CLEANINGLENGTHWISE" oven for loading GN 1/3, 1/2, 2/3 and 1/1 plates.Standard supplied with 2 GN 1/1 grid.Compact ovens with a small footprint.Direct steam by "nebulization".Convection heating: by stainless steel armoured resistors placed behind the turbine deflector.Turbine(s) with "Autoreverse" device.Depth loading, 67 mm spacing.Hinged turbine deflector, easy maintenance. Easy after-sales service, access to controls from the side...
%
Control panel TOUCH SCREENIntegrated washing system AUTO-CLEANINGLENGTHWISE" oven for loading GN 1/3, 1/2, 2/3 and 1/1 plates.Standard supplied with 2 GN 1/1 grid.Base in stainless steel, standard supplied.Compact ovens with a small footprint.Direct steam by "nebulization".Convection heating: by stainless steel armoured resistors placed behind the turbine deflector.Turbine(s) with "Autoreverse" device.Depth loading, 67 mm spacing.Hinged turbine deflector, easy maintenance. Easy after-sales...
%
Control panel TOUCH SCREENIntegrated washing system AUTO-CLEANINGLENGTHWISE" oven for loading GN 1/3, 1/2, 2/3 and 1/1 plates.Standard supplied with 1 GN 1/1 grid.Compact ovens with a small footprint.Direct steam by "nebulization".Convection heating: by stainless steel armoured resistors placed behind the turbine deflector.Turbine(s) with "Autoreverse" device.Depth loading, 67 mm spacing.Hinged turbine deflector, easy maintenance. Easy after-sales service, access to controls from the side...
%
Control panel TOUCH SCREENIntegrated washing system AUTO-CLEANINGLENGTHWISE" furnace GN 1/3, 1/2, 2/3 and 1/1 plate loadingStandard supplied with 2 GN 1/1 grids.Compact, space-saving ovens.Direct steam generation through "nebulization".Convection heating: by a gas burner (PREMIX SYSTEM) placed in the room, behind the turbine deflector.Turbine (s) with "Autoreverse" device (made of AISI 316 stainless steel).Deep loading, spacing 67 mm.Easy after-sales service, access to controls on the lateral...
%
TOUCH SCREEN control panel.Integrated washing system AUTO-CLEANING."LENGTHWISE" oven loading plates GN 1/3, 1/2, 2/3Standard supplied with 1 grid GN 1/1.Compact, space-saving ovensDirect steam by "nebulization"Convection heating: by a gas burner and a heat exchanger (PREMIX SYSTEM) placed behind the turbine deflector(s).Turbine(s) with "Auto-reverse" device (made of AISI 316 stainless steel).Depth loading, spacing 67 mmEasy after-sales service, access to controls from the side partHinged...
%
Included: 2 GN grids (325x535 mm), with guides.4 adjustable stainless steel feet. Monobloc structure, made inside and outside (including the rear) of austenitic stainless steel (food-grade), top (40 mm).Interior bottom is embossed, with a large maintenance drain plug, rounded corners (without roughness), stainless steel grids and guides (anti-tilting).Doors with recessed handles (non-protruding), magnetic seal (easy replacement without tools), hinges with automatic return (locking at...
%
Control panel TOUCH SCREEN11x GN 1/1 (530x325 mm)Integrated washing system AUTO-CLEANINGStandard supplied with 1 grid GN 1/1.2 Turbines "autorevers"Heating by stainless steel armoured resistance(s), placed behind the deflector and "direct" steam by "nebulisation".Depth loading, GN plates 1/3 - 1/2 - 2/3 - 1/1, removable plate holder structure, 67 mm spacing.Easy after-sales service, front access.Baking chamber in AISI 304 stainless steel, rounded corners and corners (easy maintenance),...
%
Control panel TOUCH SCREEN4x GN 2/3 (353x325 mm)Integrated AUTO-CLEANING washing system.Supplied as standard with 1 GN 2/3 grid.1 "Autorevers" turbine.Heating by stainless steel armoured resistance(s), placed behind the deflector and "direct" steam by "nebulisation".Depth loading, GN plates 1/3 - 1/2 - 2/3 - 1/1, removable plate holder structure, 67 mm spacing.Easy after-sales service, front access.Baking chamber in AISI 304 stainless steel, rounded corners and corners (easy maintenance),...
%
Control panel TOUCH SCREEN7x GN 1/1 (530x325 mm)Integrated washing system AUTO-CLEANINGStandard supplied with 1 grid GN 1/1.1 Turbine "autorevers"Heating by stainless steel armoured resistance(s), placed behind the deflector and "direct" steam by "nebulisation".Depth loading, GN plates 1/3 - 1/2 - 2/3 - 1/1, removable plate holder structure, 67 mm spacing.Easy after-sales service, front access.Baking chamber in AISI 304 stainless steel, rounded corners and corners (easy maintenance),...
%
Top plate in stainless steel, dismountable.Exterior and interior finish in stainless steel austenitic (alimentary).Angles and edges rounded off.Delivered with 1 adjustable shelf GN 1/1 each door.Electronic thermostat in closed moisture proof housing.Evaporator tubes integrated in the walls (3 sides), polyurethane insulation, without CFC's.Ventilated saladette well, automatic defrost, auto- evaporation of condensation water.Compressor group fit in climatice class 4 (mounted beneath -...
%
Included: 1 grid GN1/1 (530x325mm), per door4 adjustable stainless steel feet.Can be installed on a base.Interior and exterior made of AISI 304 stainless steel (food grade), monocoque frameIndependent top (removable), in stainless steel (food grade) AISI 304Stainless steel racks and slides (antitilt), allowing the grids to be positioned as desired, deep-drawn inner bottom and rounded corners and angles (without rough edges)Doors with ergonomic (not protruding) and reversible handle (see Kit...
%
Refrigeration unit positioned on the leftIncluded: 1 grid GN1/1 (530x325mm), per door4 adjustable stainless steel feet.Can be installed on a base.Interior and exterior made of AISI 304 stainless steel (food grade), monocoque frameIndependent top (removable), in stainless steel (food grade) AISI 304Stainless steel racks and slides (antitilt), allowing the grids to be positioned as desired, deep-drawn inner bottom and rounded corners and angles (without rough edges)Doors with ergonomic (not...
%
Top with 50 mm edge (15/10th)Included: 4 pairs of slides for 600x400 mm plates, per door4 adjustable stainless steel feet.Can be installed on a base.Interior and exterior made of AISI 304 stainless steel (food grade), monocoque frameIndependent top top (removable), in stainless steel (food grade) AISI 304Stainless steel racks and slides (maximum capacity 8 slides, spacing 68 mm), allowing the plates to be positioned as desired, deep-drawn inner bottom and rounded corners and angles (without...
%
Working top in "bevelled edges" granite (30 mm thick)Included: 4 pairs of slides for 600x400 mm plates, per door4 adjustable stainless steel feet.Can be installed on a base.Interior and exterior made of AISI 304 stainless steel (food grade), monocoque frameIndependent top top (removable), in stainless steel (food grade) AISI 304Stainless steel racks and slides (maximum capacity 8 slides, spacing 68 mm), allowing the plates to be positioned as desired, deep-drawn inner bottom and rounded...
%