%
2 compressor groups and 2 evaporators, independent.Included: 2 grids GN 2/1 (530x650 mm) + 4 trays GN1/1-100 mm in polycarbonate.Fish refrigerator: evaporator at copper coil, embedded in the walls (3 sides), manual defrost, with water collecting tray, bottom fitted with a draining tap.4 adjustable stainless steel feet.Refrigerant Gas R290. Interior and exterior made of stainless steel (food grade) AISI 304 (rear galvanized steel), monocoque frameStainless steel racks and slides (antitilt),...
%
- Air condenser.- Vertical turbine with automatic extraction.- Minimum mixing capacity 3 lit. and maximum 7 lit.- Noise level below 70 dB.- Vertical evaporator cylinders for a larger exchange surface.- Cycle with time control or temperature control.- Exclusive distribution device. - System self diagnosis.- Cycle time: 8/12 min.- Hourly production: 50 litres.NB: mainly for cold work
%
- Air condenser.- Vertical turbine with automatic extraction.- Minimum mixing capacity 3 lit. and maximum 7 lit.- Noise level below 70 dB.- Vertical evaporator cylinders for a larger exchange surface.- Cycle with time control or temperature control.- Exclusive distribution device. - System self diagnosis.- Cycle time: 8/12 min.- Hourly production: 50 litres.NB: mainly for cold work.
%
- Water condenser.- Vertical turbine with automatic extraction.- Minimum mixing capacity 3 lit. and maximum 7 lit.- Noise level below 70 dB.- Vertical evaporator cylinders for a larger exchange surface.- Cycle with time control or temperature control.- Exclusive distribution device. - System self diagnosis.- Cycle time: 8/12 min.- Hourly production: 50 litres.NB: mainly for cold work.
%
%
2 compressor groups and 2 evaporators, independent.Included: 2 x 2 grids GN2/1 (530x650 mm).Freezer: inner door fitted with warming resistance, copper coil evaporator, embedded in the walls (3 sides), manual defrost and depression valve, bottom fitted with a draining tap.4 adjustable stainless steel feet.Refrigerant gas R290 Interior and exterior made of stainless steel (food grade) AISI 304 (rear galvanized steel), monocoque frameStainless steel racks and slides (antitilt), allowing the...
%
- Manufactured in stainless steel AISI 441. - 3 drawers for the plates 600x400.PLUS: Modulate you piece of furniture according to your needs, each module is 500-mm wide, except the cupboards with sliding doors, which are 1000, 1500 and 2000 mm. Possible to put a 800-mm deep top, on request.
%
%
- Manufactured in stainless steel AISI 441.- 2 sliding doors, isolated double walls, adjustable intermediate shelf.PLUS: Modulate you piece of furniture according to your needs, each module is 500-mm wide, except the cupboards with sliding doors, which are 1000, 1500 and 2000 mm. Possible to put a 800-mm deep top, on request.
%
- Manufactured in stainless steel AISI 441. - 2 sliding doors, isolated double walls, adjustable intermediate shelf.PLUS: Modulate you piece of furniture according to your needs, each module is 500-mm wide, except the cupboards with sliding doors, which are 1000, 1500 and 2000 mm. Possible to put a 800-mm deep top, on request.
%
- Manufactured in stainless steel AISI 441. - 2 sliding doors, isolated double walls, adjustable intermediate shelf.PLUS: Modulate you piece of furniture according to your needs, each module is 500-mm wide, except the cupboards with sliding doors, which are 1000, 1500 and 2000 mm. Possible to put a 800-mm deep top, on request.
%
- Vervaardigd uit RVS. AISI 441- Structuur voor Dienbladen 600x400, 6niveaus
%
- Manufactured in stainless steel AISI 441. - 2 sliding doors, isolated double walls, adjustable intermediate shelf.PLUS: Modulate you piece of furniture according to your needs, each module is 500-mm wide, except the cupboards with sliding doors, which are 1000, 1500 and 2000 mm. Possible to put a 800-mm deep top, on request.
%
%
- Manufactured in stainless steel AISI 441. - Thickness 15/10, reinforced with a stainless steel sheet on the bottom.PLUS: Modulate you piece of furniture according to your needs, each module is 500-mm wide, except the cupboards with sliding doors, which are 1000, 1500 and 2000 mm. Possible to put a 800-mm deep top, on request.
%
- Manufactured in stainless steel AISI 441. - Thickness 15/10, reinforced with a stainless steel sheet on the bottom.PLUS: Modulate you piece of furniture according to your needs, each module is 500-mm wide, except the cupboards with sliding doors, which are 1000, 1500 and 2000 mm. Possible to put a 800-mm deep top, on request.
%
- Manufactured in stainless steel AISI 441. - Thickness 15/10, reinforced with a stainless steel sheet on the bottom.PLUS: Modulate you piece of furniture according to your needs, each module is 500-mm wide, except the cupboards with sliding doors, which are 1000, 1500 and 2000 mm. Possible to put a 800-mm deep top, on request.
%
- Manufactured in stainless steel AISI 441. - Capacity 125 liters, lids + wheels.PLUS: Modulate you piece of furniture according to your needs, each module is 500-mm wide, except the cupboards with sliding doors, which are 1000, 1500 and 2000 mm. Possible to put a 800-mm deep top, on request.