%
Delivered with 1 plate in stainless steel and 1 grill 460x340 mm.1 turbine "autoreverse".Cooking chamber: fully welded, fully waterproof, rounded corners and corners. Seal on the counter door, easily removable. Easily removable (75 mm) antitipper plate holder structure. Deflectors easily removable. Oura for condensate drainage.Motor(s) with turbine(s) (2800 rpm) "self-reversing" guarantee a homogeneous heat diffusion.Athermal door with double glazing (4 mm), hinged intermediate glass, easy...
%
Supplied with 1 grid 600x400 mm.2 "autoreverse" turbinesCooking chamber: fully welded, fully waterproof, rounded corners and corners. Seal on the counter door, easily removable. Easily removable (75 mm) antitipper plate holder structure. Deflectors easily removable. Oura for condensate drainage.Motor(s) with turbine(s) (2800 rpm) "self-reversing" guarantee a homogeneous heat diffusion.Athermal door with double glazing (4 mm), hinged intermediate glass, easy maintenance. Ergonomic and athermic...
%
- Supplied with 1 grid 600x400 mm. - 2 "autoreverse" turbines- Cooking chamber: fully welded, fully waterproof, rounded corners and corners. Seal on the counter door, easily removable. Easily removable (75 mm) antitipper plate holder structure. Deflectors easily removable. Oura for condensate drainage. - Motor(s) with turbine(s) (2800 rpm) "self-reversing" guarantee a homogeneous heat diffusion. - Athermal door with double glazing (4 mm), hinged intermediate glass, easy maintenance. Ergonomic...
%
Supplied with 1 grid 600x400 mm.2 "autoreverse" turbinesCooking chamber: fully welded, fully waterproof, rounded corners and corners. Seal on the counter door, easily removable. Easily removable (75 mm) antitipper plate holder structure. Deflectors easily removable. Oura for condensate drainage.Motor(s) with turbine(s) (2800 rpm) "self-reversing" guarantee a homogeneous heat diffusion.Athermal door with double glazing (4 mm), hinged intermediate glass, easy maintenance. Ergonomic and athermic...
%
Delivered with one gridlle GN 1/12 fans "autoreverse"Inside and outside made off stainless steel AISI 430.Cooking area: fully welded, fully hermetic, rounded edges and angles. - Joint on the inner door, easily removable.Stamped bottom collects the condensate to the waste unit. Plate holder structure, easily removable (75 mm) anti toppling.Heat diffusers easily removable.Evacuation pipe for the condensate.Motors with "autoreverse" turbines (2800 t/mn) guarantee a perfect heat diffusion.Door:...
%
%
Sold with one gridlle GN 2/31 fan "autoreverse"Inside and outside made off stainless steel AISI 430.Cooking area: fully welded, fully hermetic, rounded edges and angles. - Joint on the inner door, easily removable.Stamped bottom collects the condensate to the waste unit. Plate holder structure, easily removable (75 mm) anti toppling.Heat diffusers easily removable.Evacuation pipe for the condensate.Motors with "autoreverse" turbines (2800 t/mn) guarantee a perfect heat diffusion.Door:...
%
Basin manufactured in stainless steel AISI 304,bottom in stainless steel AISI 316.Diameter of the basin 420, depth 485 mm.Outlet tap of 1",1/2. Made of 18/10 AISI 304 stainless steel, deep-drawn "Top" thickness 15/10th, adjustable stainless steel feet (150/200 mm), waterproof "IPX5".Deep-drawn" tank made of AISI 316 stainless steel, bottom 30/10 mm thick, side walls 20/10 mm thick, resistant to salt corrosion and wear, equipped with a removable strainer to protect the drain valve. Water tap...
%
Basin manufactured in stainless steel AISI 304,bottom in stainless steel AISI 316.Diameter of the basin 420, depth 485 mm.Outlet tap of 1",1/2. Made of 18/10 AISI 304 stainless steel, deep-drawn "Top" thickness 15/10th, adjustable stainless steel feet (150/200 mm), waterproof "IPX5".Deep-drawn" tank made of AISI 316 stainless steel, bottom 30/10 mm thick, side walls 20/10 mm thick, resistant to salt corrosion and wear, equipped with a removable strainer to protect the drain valve. Water tap...
%
Tank diameter 600, depth 400 mm.2" drain valve. Made of AISI 304 stainless steel, adjustable stainless steel feet.Deep-drawn" tank made of AISI 304 stainless steel, equipped with a removable strainer. Water tap for filling the tank.Deep-drawn" cover, hinges with "torsion spring" allowing gradual closing and opening.Indirect heating, double jacketed tank, water filling through a tap, a second one acting as an overflow, allows to check the completion of the filling. Pressure control of the...
%
Tank diameter 600, depth 400 mm.2" drain valve. Made of AISI 304 stainless steel, adjustable stainless steel feet.Deep-drawn" tank made of AISI 304 stainless steel, equipped with a removable strainer. Water tap for filling the tank.Deep-drawn" cover, hinges with "torsion spring" allowing gradual closing and opening.Indirect heating, double jacketed tank, water filling through a tap, a second one acting as an overflow, allows to check the completion of the filling. Pressure control of the...
%
Tank diameter 600, depth 530 mm.2" drain valve. Made of AISI 304 stainless steel, adjustable stainless steel feet.Deep-drawn" tank made of AISI 304 stainless steel, equipped with a removable strainer. Water tap for filling the tank.Deep-drawn" cover, hinges with "torsion spring" allowing gradual closing and opening.Indirect heating, double jacketed tank, water filling through a tap, a second one acting as an overflow, allows to check the completion of the filling. Pressure control of the...
%
Tank diameter 600, depth 530 mm.2" drain valve. Made of AISI 304 stainless steel, adjustable stainless steel feet.Deep-drawn" tank made of AISI 304 stainless steel, equipped with a removable strainer. Water tap for filling the tank.Deep-drawn" cover, hinges with "torsion spring" allowing gradual closing and opening.Indirect heating, double jacketed tank, water filling through a tap, a second one acting as an overflow, allows to check the completion of the filling. Pressure control of the...
%
Tank diameter 400 mm, depth 420 mm.Drain tap 6/4". Made of stainless steel AISI 304, adjustable feet in stainless steel.Pressed and sealed top (15/10 mm) in stainless steel AISI 304.Rear chimney in stainless steel AISI 304.Deep-drawn tank made of AISI 304 stainless steel, bottom in AISI 316 stainless steel (bottom of the tank 30/10 mm thick, side walls 20/10 mm thick), resistant to salt corrosion and wear, equipped with removable strainer for protection of the drain valve, corners with...
%
Diameter of the tank 600 mm, depth 420 mm.Drainage tap 2".Made in stainless steel AISI 304, adjustable feet in stainless steel.Stamped and waterproof top (20/10 mm) in stainless steel AISI 304.Chimney in the back in stainless steel AISI 304."Stamped" tank in stainless steel AISI 304, bottom in stainless steel AISI 316 30/10 mm, side walls in 20/10 mm, resistant to salt corrosion and wear, provided with a removable strainer for protection of the drain valve, corners with rounded interior...
%
Diameter of the tank 600 mm, deep 540 mm.Drainage tap 2".Made in stainless steel AISI 304, adjustable feet in stainless steel.Stamped and waterproof top (20/10 mm) in stainless steel AISI 304.Chimney in the back in stainless steel AISI 304."Stamped" tank in stainless steel AISI 304, bottom in stainless steel AISI 316 30/10 mm, side walls in 20/10 mm, resistant to salt corrosion and wear, provided with a removable strainer for protection of the drain valve, corners with rounded interior...
%
- Diameter of the basin 420, depth 485 mm.- Outlet tap of 1,1/2".- Made of AISI 304 stainless steel, "deep drawn" top (15/10th), adjustable stainless steel feet (150/200 mm), waterproof "IPX5". - Deep-drawn" tank made of AISI 316 stainless steel, bottom 30/10 mm thick, side walls 20/10 mm thick, resistant to salt corrosion and wear, equipped with a removable strainer to protect the drain valve. Water tap for filling the tank. - Deep-drawn" cover, made of AISI 316 stainless steel with double...
%
Diameter of the basin 420, depth 485 mm.Outlet tap of 1,1/2". Made of AISI 304 stainless steel, "deep-drawn" top (15/10 mm), adjustable stainless steel feet (150/200 mm), waterproof "IPX5".Deep-drawn" tank made of AISI 316 stainless steel, bottom 30/10 mm thick, side walls 20/10 mm thick, resistant to salt corrosion and wear, equipped with a removable strainer to protect the drain valve. Water tap for filling the tank.Deep-drawn" cover, made of AISI 316 stainless steel with double walls...
%
Tank diameter 600, depth 400 mm.2" drain valve. Made of AISI 304 stainless steel, adjustable stainless steel feet.Deep-drawn" tank made of AISI 304 stainless steel, equipped with a removable strainer. Water tap for filling the tank.Deep-drawn" cover, hinges with "torsion spring" allowing gradual closing and opening.Gas heating, by stainless steel burners with stabilized flame, regulation by valve.Appliances built in compliance with current standards (CE)
%
%
%
Tank diameter 400 mm, depth 420 mm.6/4" drain valve.Made of AISI 304 stainless steel, adjustable stainless steel feet.Deep-drawn and waterproof top (15/10 mm) in AISI 304 stainless steel.Rear chimney in AISI 304 stainless steel.Deep-drawn" tank made of AISI 304 stainless steel, bottom made of AISI 316 stainless steel (bottom of the tank 30/10 mm thick, side walls 20/10 mm thick), resistant to salt corrosion and wear, equipped with a removable strainer to protect the drain valve, rounded inner...
%
Diameter of the tank 600 mm, depth 420 mm.2" drain tap.Made in stainless steel AISI 304, adjustable feet in stainless steel.Stamped and waterproof top (20/10 mm) in stainless steel AISI 304.Chimney in the back in stainless steel AISI 304."Stamped" tank in stainless steel AISI 304, bottom in stainless steel AISI 316 (30/10 mm, side walls 20/10 mm), resistant to salt corrosion and usury, provided with a removable strainer for protection of the drain valve, corners with rounded interior angles....
%
Diameter of the tank 600 mm, depth 420 mm.2" drain tap.Made in stainless steel AISI 304, adjustable feet in stainless steel.Stamped and waterproof top (20/10 mm) in stainless steel AISI 304.Chimney in the back in stainless steel AISI 304."Stamped" tank in stainless steel AISI 304, bottom in stainless steel AISI 316 (30/10 mm, side walls 20/10 mm), resistant to salt corrosion and usury, provided with a removable strainer for protection of the drain valve, corners with rounded interior angles....