%
2 professional magnetrons, for intensive use. Digital controls, 30 storable "programs" with self-diagnostic device, 5 power levels. Preset key for 20-second use (at the highest power). Outgoing power 1500 W. Easy cleaning of the aeration filter. Interior dimensions : 370x370xh190 mm. Contents 26 liters. Stackable units. Interior and exterior manufactured in stainless steel.
%
2 professional magnetrons, for intensive use. Digital controls, 30 storable "programs" with self-diagnostic device, 5 power levels. Preset key for 20-second use (at the highest power). (Outgoing) power 1850 W. Easy cleaning of the aeration filter. Interior dimensions : 370x370xh190 mm. Contents 26 liters. Stackable units. Interior and exterior manufactured in stainless steel.
%
2 professional magnetrons, for intensive use Internal LED lightingDigital controls, 50 "memorizable" programs with self-diagnosis device, 5 power levelsPre-programmed button for use during 20 seconds (at the highest power)Output power (rendered) 1500 WEasy cleaning of the ventilation filterInternal dimensions: 370x370xh190 mmContent 26 liters Stackable appliances Interior and exterior stainless steel construction
%
2 professional magnetrons, for intensive use Internal LED lightingDigital controls, 50 "memorizable" programs with self-diagnosis device, 5 power levelsPre-programmed button for use during 20 seconds (at the highest power)Output power (rendered) 1850 WEasy cleaning of the ventilation filterInternal dimensions: 370x370xh190 mm Content 26 liters Stackable appliances Interior and exterior stainless steel construction
%
Output power 1400 W1 magnetron (under the base of the oven) for professional useDigital control panel: 5 power levels, timer (0 to 60 minutes) with sound signal at the end of the cycle (10 presets from 0:10 seconds to 5:00 minutes) and a "X2" push-button for multiple portions, Stop and Start buttons and visual displaySelf-diagnostic device in case of anomalies.100 "storable" programs.Capacity 34 liters, with the possibility of using GN 2/3, 1/2, 1/3, 1/4 ... dishes up to ø 350 mmInterior...
%
Output power (rendered) 2100 W2 magnetrons (1 on the vault, 1 under the bottom of the oven), for very intensive professional use!Digital control panel: 5 power levels, timer (from 0 to 60 minutes) with acoustic signal at the end of the cycle (10 presets from 0:10 seconds to 3:30 minutes) as well as a "X2" button multiple portions, Stop & Start buttons and display displaySelf-diagnosis device in case of anomalies.100 "memorizable" programsIntermediate shelf in treated glass (removable) as...
%
Basin manufactured in stainless steel AISI 304,bottom in stainless steel AISI 316.Diameter of the basin 420, depth 485 mm.Outlet tap of 1",1/2. Made of 18/10 AISI 304 stainless steel, deep-drawn "Top" thickness 15/10th, adjustable stainless steel feet (150/200 mm), waterproof "IPX5".Deep-drawn" tank made of AISI 316 stainless steel, bottom 30/10 mm thick, side walls 20/10 mm thick, resistant to salt corrosion and wear, equipped with a removable strainer to protect the drain valve. Water tap...
%
Basin manufactured in stainless steel AISI 304,bottom in stainless steel AISI 316.Diameter of the basin 420, depth 485 mm.Outlet tap of 1",1/2. Made of 18/10 AISI 304 stainless steel, deep-drawn "Top" thickness 15/10th, adjustable stainless steel feet (150/200 mm), waterproof "IPX5".Deep-drawn" tank made of AISI 316 stainless steel, bottom 30/10 mm thick, side walls 20/10 mm thick, resistant to salt corrosion and wear, equipped with a removable strainer to protect the drain valve. Water tap...
%
Tank diameter 600, depth 400 mm.2" drain valve. Made of AISI 304 stainless steel, adjustable stainless steel feet.Deep-drawn" tank made of AISI 304 stainless steel, equipped with a removable strainer. Water tap for filling the tank.Deep-drawn" cover, hinges with "torsion spring" allowing gradual closing and opening.Indirect heating, double jacketed tank, water filling through a tap, a second one acting as an overflow, allows to check the completion of the filling. Pressure control of the...
%
Tank diameter 600, depth 400 mm.2" drain valve. Made of AISI 304 stainless steel, adjustable stainless steel feet.Deep-drawn" tank made of AISI 304 stainless steel, equipped with a removable strainer. Water tap for filling the tank.Deep-drawn" cover, hinges with "torsion spring" allowing gradual closing and opening.Indirect heating, double jacketed tank, water filling through a tap, a second one acting as an overflow, allows to check the completion of the filling. Pressure control of the...
%
Tank diameter 600, depth 530 mm.2" drain valve. Made of AISI 304 stainless steel, adjustable stainless steel feet.Deep-drawn" tank made of AISI 304 stainless steel, equipped with a removable strainer. Water tap for filling the tank.Deep-drawn" cover, hinges with "torsion spring" allowing gradual closing and opening.Indirect heating, double jacketed tank, water filling through a tap, a second one acting as an overflow, allows to check the completion of the filling. Pressure control of the...
%
Tank diameter 600, depth 530 mm.2" drain valve. Made of AISI 304 stainless steel, adjustable stainless steel feet.Deep-drawn" tank made of AISI 304 stainless steel, equipped with a removable strainer. Water tap for filling the tank.Deep-drawn" cover, hinges with "torsion spring" allowing gradual closing and opening.Indirect heating, double jacketed tank, water filling through a tap, a second one acting as an overflow, allows to check the completion of the filling. Pressure control of the...
%
Tank diameter 400 mm, depth 420 mm.Drain tap 6/4". Made of stainless steel AISI 304, adjustable feet in stainless steel.Pressed and sealed top (15/10 mm) in stainless steel AISI 304.Rear chimney in stainless steel AISI 304.Deep-drawn tank made of AISI 304 stainless steel, bottom in AISI 316 stainless steel (bottom of the tank 30/10 mm thick, side walls 20/10 mm thick), resistant to salt corrosion and wear, equipped with removable strainer for protection of the drain valve, corners with...
%
Diameter of the tank 600 mm, depth 420 mm.Drainage tap 2".Made in stainless steel AISI 304, adjustable feet in stainless steel.Stamped and waterproof top (20/10 mm) in stainless steel AISI 304.Chimney in the back in stainless steel AISI 304."Stamped" tank in stainless steel AISI 304, bottom in stainless steel AISI 316 30/10 mm, side walls in 20/10 mm, resistant to salt corrosion and wear, provided with a removable strainer for protection of the drain valve, corners with rounded interior...
%
Diameter of the tank 600 mm, deep 540 mm.Drainage tap 2".Made in stainless steel AISI 304, adjustable feet in stainless steel.Stamped and waterproof top (20/10 mm) in stainless steel AISI 304.Chimney in the back in stainless steel AISI 304."Stamped" tank in stainless steel AISI 304, bottom in stainless steel AISI 316 30/10 mm, side walls in 20/10 mm, resistant to salt corrosion and wear, provided with a removable strainer for protection of the drain valve, corners with rounded interior...
%
- Diameter of the basin 420, depth 485 mm.- Outlet tap of 1,1/2".- Made of AISI 304 stainless steel, "deep drawn" top (15/10th), adjustable stainless steel feet (150/200 mm), waterproof "IPX5". - Deep-drawn" tank made of AISI 316 stainless steel, bottom 30/10 mm thick, side walls 20/10 mm thick, resistant to salt corrosion and wear, equipped with a removable strainer to protect the drain valve. Water tap for filling the tank. - Deep-drawn" cover, made of AISI 316 stainless steel with double...
%
Diameter of the basin 420, depth 485 mm.Outlet tap of 1,1/2". Made of AISI 304 stainless steel, "deep-drawn" top (15/10 mm), adjustable stainless steel feet (150/200 mm), waterproof "IPX5".Deep-drawn" tank made of AISI 316 stainless steel, bottom 30/10 mm thick, side walls 20/10 mm thick, resistant to salt corrosion and wear, equipped with a removable strainer to protect the drain valve. Water tap for filling the tank.Deep-drawn" cover, made of AISI 316 stainless steel with double walls...
%
Tank diameter 600, depth 400 mm.2" drain valve. Made of AISI 304 stainless steel, adjustable stainless steel feet.Deep-drawn" tank made of AISI 304 stainless steel, equipped with a removable strainer. Water tap for filling the tank.Deep-drawn" cover, hinges with "torsion spring" allowing gradual closing and opening.Gas heating, by stainless steel burners with stabilized flame, regulation by valve.Appliances built in compliance with current standards (CE)
%
%
%
Tank diameter 400 mm, depth 420 mm.6/4" drain valve.Made of AISI 304 stainless steel, adjustable stainless steel feet.Deep-drawn and waterproof top (15/10 mm) in AISI 304 stainless steel.Rear chimney in AISI 304 stainless steel.Deep-drawn" tank made of AISI 304 stainless steel, bottom made of AISI 316 stainless steel (bottom of the tank 30/10 mm thick, side walls 20/10 mm thick), resistant to salt corrosion and wear, equipped with a removable strainer to protect the drain valve, rounded inner...
%
Diameter of the tank 600 mm, depth 420 mm.2" drain tap.Made in stainless steel AISI 304, adjustable feet in stainless steel.Stamped and waterproof top (20/10 mm) in stainless steel AISI 304.Chimney in the back in stainless steel AISI 304."Stamped" tank in stainless steel AISI 304, bottom in stainless steel AISI 316 (30/10 mm, side walls 20/10 mm), resistant to salt corrosion and usury, provided with a removable strainer for protection of the drain valve, corners with rounded interior angles....
%
Diameter of the tank 600 mm, depth 420 mm.2" drain tap.Made in stainless steel AISI 304, adjustable feet in stainless steel.Stamped and waterproof top (20/10 mm) in stainless steel AISI 304.Chimney in the back in stainless steel AISI 304."Stamped" tank in stainless steel AISI 304, bottom in stainless steel AISI 316 (30/10 mm, side walls 20/10 mm), resistant to salt corrosion and usury, provided with a removable strainer for protection of the drain valve, corners with rounded interior angles....
%
Diamter of the tank 600 mm, depth 540 mm.Drain tap 2".Made in stainless steel AISI 304, adjustable feet in stainless steel.Stamped and waterproof top (20/10 mm) in stainless steel AISI 304.Chimney in the back in stainless steel AISI 304."Stamped" tank in stainless steel AISI 304, bottom in stainless steel AISI 316 (30/10 mm, side walls 20/10 mm), resistant to salt corrosion and usury, provided with a removable strainer for protection of the drain valve, corners with rounded interior angles....