%
Compact, but with a large cutting capacity, realized in anodized and polished aluminum alloy.Sanitary polished and anodized aluminium alloy, hardened, chromed stainless blade, permanent tapered blade ring guard and interlocked blade guard (100% safe).Reinforced gauge plate, max. cutting capacity 250xh185 (Ø 210 mm) slice thickness 0-13 mm.Carriage sliding on stainless bearings for an easy and quiet operation, a plexiglass hand guard comes standard.Stainless steel screws and...
%
Compact machine but with an important cutting capacity.Hardened, chrome-plated and ground steel blade (Ø 300 mm), fixed protection ring and blade cover with microswitch (100% safety).Sliding of the carriage on self-lubricating bushings and ground pins.Stainless steel screws.Built-in aluminium sharpener with 2 emery wheels. On/off switch, protection class IP 44.Ventilated motor, lower protection, with direct access to the electrical elements, sealing ring on the transmission pulley,...
%
Gravity feed, 38° inclination.Max. cutting capacity 230xh175 (Ø 200 mm), slice thickness 0-30 mm.41 mm gap between blade and body. Stylish and performing, sanitary polished and anodized aluminium alloy, hardened, chromed stainless blade, permanent tapered blade ring guard and interlocked blade guard (100% safe).Reinforced gauge plate, removable slider guard.Carriage sliding on stainless bearings for an easy and quiet operation, polished, chromed and hardened sliding bar, vulcanized rubber...
%
Version with vertical blade.Double-feed carriage with a clamping arm holding firmly in place all cold meats.Cutting capacity 275 mm, plate 275xh260 mm.Cutting thickness 0-30 mm. Rounded design, no corners and sharp edges and no visible screws.Blade (Ø 300 mm) made of hardened steel, chrome and improved, tapered blade ring guard and interlocked blade guard (100% safe).Ashes of the cutting carriage in chrome, improved and polished.Carriage sliding on stainless bearings for an easy and quiet...
%
Made of "anodized aluminum", food treated.Blade in stainless steel AISI 304.Sliding carriage with transparent Plexiglas protection.Cutting capacity : 200x260 mm.Sharpening device, delivered separately, with adapter.Cutting adjustment from 0-15 mm.Easily removable blade guard.No volt release" device that prevents the machine from starting during the cleaning phase.Low voltage control 24 V, protection class IP65.Safety microswitch on the blade.Blade cover ring (100% protection).The machine is...
%
Capacity 10 GN 2/1 levels (or 20x GN 1/1).Upper section fitted with stainless steel gallery on 4 sides. Construction in stainless steel AISI 304.Walls and door made of dual injected walls (polyurethane CFC-free high density).Possibility of use GN 2/1 or GN 1/1 spaced 70 mm.Homogeneity of the temperature through an internal ventilator.Cross bowl stamped with rounded corners.Hinged door with opening at 270°, equipped with a key lock with a seal in the door frame, easily replaceable without...
%
Capacity 20 GN 2/1 levels (or 40x GN 1/1). Construction in stainless steel AISI 304.Walls and door made of dual injected walls (polyurethane CFC-free high density).Possibility of use GN 2/1 or GN 1/1 spaced 70 mm.Homogeneity of the temperature through an internal ventilator.Cross bowl stamped with rounded corners.Hinged door with opening at 270°, equipped with a key lock with a seal in the door frame, easily replaceable without tools.Equipped with 4 wheels Ø 160 mm in stainless steel, 2 with...
%
Capacity 40 GN 2/1 levels (or 80x GN 1/1).SPECIAL BANQUETING: Standard 20 grids to optimize space inside the trollley.Up to eight (8) plates with a diameter of 300 mm can be stored per level, for a total of 160 plates. Construction in stainless steel AISI 304.Walls and door made of dual injected walls (polyurethane CFC-free high density).Possibility of use GN 2/1 or GN 1/1 spaced 70 mm.Homogeneity of the temperature through an internal ventilator.Cross bowl stamped with rounded corners.Hinged...
%
%
Included: 2 grids (405x460 mm), with slides4 adjustable stainless steel feet. Monobloc structure, made inside and outside (including the back) of austenitic stainless steel (food-grade), top (40 mm).Embossed interior bottom, with a large maintenance drain plug, rounded corners (smooth), stainless steel racks and slides (anti-tilt).Doors with flush-mounted handles (non-protruding), magnetic seal (easy replacement without tools), hinges with automatic return (locking at 90°).Compressor unit in...
%
- Traction of the blade with manuel wheel (no electricity supply).- Blade in stainless steel AISI 304, automatic sharpening integrated.- Integrated blade protection (CEE standard).- Cut capacity 230x190 mm, cut adjustment from 0-8 mm, trajectory of carriage 230 mm, plate 240x275 mm.- Realisation in cast iron (bright red) and anodized aluminium.
%
%
Made of food-safe "anodized aluminum".Hardened, chrome-plated steel blade.Easily removable sliding carriage with transparent Plexiglas guard.Cutting capacity: 200x260 mm.Built-in automatic sharpening.Cutting range 0-15 mm.Easily removable blade guard.“No volt release" device prevents machine start-up during cleaning phase.24 V low-voltage control, IP65 protection.Safety microswitch on blade.Blade cover ring (100% protection).Built in compliance with current CE standards.
%
%
1 ventilated evaporator.Included: 1 grid GN 1/1 (530x325 mm), by door.4 adjustable stainless steel feet.Monocoque designManufactured in stainless steel, inside AISI 304, outside AISI 441.Independent upper top (dismountable), stainless steel AISI 304.Stainless steel rack and slides (anti-tilting), allowing to place the grids as one pleases.Stamped interior bottom, rounded angles and corners (without roughness).Doors with ergonomic handle (no salient) and reversible (kit is not necessary),...
%
Refrigeration unit on the left side.1 ventilated evaporator.Included: 1 grid GN 1/1 (530x325 mm), by door.4 adjustable stainless steel feet.Conception MonocoqueManufactured in stainless steel, inside AISI 304, outside AISI 441.Independent upper top (dismountable), stainless steel AISI 304.Stainless steel rack and slides (anti-tilting), allowing to place the grids as one pleases.Stamped interior bottom, rounded angles and corners (without roughness).Doors with ergonomic handle (no salient) and...
%
Included: 2 GN grids (325x535 mm), with guides.4 adjustable stainless steel feet. Monobloc structure, made inside and outside (including the rear) of austenitic stainless steel (food-grade), top (40 mm).Interior bottom is embossed, with a large maintenance drain plug, rounded corners (without roughness), stainless steel grids and guides (anti-tilting).Doors with recessed handles (non-protruding), magnetic seal (easy replacement without tools), hinges with automatic return (locking at...
%
Top plate in stainless steel, dismountable.Exterior and interior finish in stainless steel austenitic (alimentary).Angles and edges rounded off.Delivered with 1 adjustable shelf GN 1/1 each door.Electronic thermostat in closed moisture proof housing.Evaporator tubes integrated in the walls (3 sides), polyurethane insulation, without CFC's.Ventilated saladette well, automatic defrost, auto- evaporation of condensation water.Compressor group fit in climatice class 4 (mounted beneath -...
%
Included: 1 grid GN1/1 (530x325mm), per door4 adjustable stainless steel feet.Can be installed on a base.Interior and exterior made of AISI 304 stainless steel (food grade), monocoque frameIndependent top (removable), in stainless steel (food grade) AISI 304Stainless steel racks and slides (antitilt), allowing the grids to be positioned as desired, deep-drawn inner bottom and rounded corners and angles (without rough edges)Doors with ergonomic (not protruding) and reversible handle (see Kit...
%
Refrigeration unit positioned on the leftIncluded: 1 grid GN1/1 (530x325mm), per door4 adjustable stainless steel feet.Can be installed on a base.Interior and exterior made of AISI 304 stainless steel (food grade), monocoque frameIndependent top (removable), in stainless steel (food grade) AISI 304Stainless steel racks and slides (antitilt), allowing the grids to be positioned as desired, deep-drawn inner bottom and rounded corners and angles (without rough edges)Doors with ergonomic (not...
%
Top with 50 mm edge (15/10th)Included: 4 pairs of slides for 600x400 mm plates, per door4 adjustable stainless steel feet.Can be installed on a base.Interior and exterior made of AISI 304 stainless steel (food grade), monocoque frameIndependent top top (removable), in stainless steel (food grade) AISI 304Stainless steel racks and slides (maximum capacity 8 slides, spacing 68 mm), allowing the plates to be positioned as desired, deep-drawn inner bottom and rounded corners and angles (without...
%
Working top in "bevelled edges" granite (30 mm thick)Included: 4 pairs of slides for 600x400 mm plates, per door4 adjustable stainless steel feet.Can be installed on a base.Interior and exterior made of AISI 304 stainless steel (food grade), monocoque frameIndependent top top (removable), in stainless steel (food grade) AISI 304Stainless steel racks and slides (maximum capacity 8 slides, spacing 68 mm), allowing the plates to be positioned as desired, deep-drawn inner bottom and rounded...
%