%
%
Stainless steel sheet structure, brushed finishing. Insulated withexpanded polyurethane panels.Insulated top lids opening outwards through 180° to form supportsurfaces, complete with edges to retain condensation.Pressed stainless steel basin without sharp edges, withthermostats, for GN containers up to 20 cm depth (not included).Heated with dry resistance elements underneath each basin.Insulated movement handles.Edge bumper strips in grey non-marking rubber.Castors diam. 16 cm, with two...
%
Structure en tôle d'acier inox, finition brossée. Isolés avec despanneaux de polyuréthane expansé.Des couvercles supérieurs ouvrables à 180°, pour former un plan detravail, dotés de bord de limitation de condensation.Bassins inox emboutis et dépourvus d'arêtes, avec thermomètre/ thermostats indépendants, pour récipients GN et profondeur 20 cm (non inclus).Chauffants avec éléments de résistance à sec sous chaque cuve.Compartiment neutre inférieur, fermé avec porte à charnièrerabattable vers...
%
Tank: 310x690xh160 mm, trays GN-150 mm. (NB: GN trays not included).Cupboard (GN 1/1) (340x940xh360 mm). Made in stainless steel AISI 304, adjustable feet in stainless steel.Waterproof top (20/10 mm) in stainless steel AISI 304.Chimney in stainless steel AISI 304. "Stamped" tank in stainless steel AISI 304 welded (continuous), with all corners and interior corners rounded for easy and hygienic maintenance, a drain valve (bullet) is placed on the front of the unit. Electric heating by...
%
Dimensions of the basin: 306x510xh156 mm, for GN trays till 150 mm.NB: delivered without GN tray. Made of AISI 304 stainless steel, deep-drawn "Top" (15/10th), levelling cylinders, waterproofing "IPX4".Tank, with rounded corners, in AISI 304 stainless steel. Discharge valve.Electric heating by AISI 304 stainless steel armoured resistors, placed underneath the tank. ON/OFF switch, regulation from 30°C to 90°C.Appliances built in compliance with current standards (CE)
%
- Dimensiones tanque: 630x510xh156 mm, para cubas GN de hasta 150 mm. - Para el suministro automático de agua E17/BM8T ver A17/R2BM. - Nota: se suministra sin cubas Gastronorm.- De acero inoxidable AISI 304, "top" embutido de 15/10 mm de espesor, patas niveladoras, impermeable "IPX4" - Tanque con esquinas redondeadas, de acero inoxidable AISI 304. Válvula de drenaje. - Calefacción eléctrica con elementos calefactores blindados de acero inoxidable AISI 304, situados bajo el depósito....
%
- Tank dimensions: 630x510xh156 mm, for GN trays up to 150 mm. - For automatic water supply E17/BM8T See (A17/R2BM).- NB: delivered without gastronorm tray.- Made of AISI 304 stainless steel, deep-drawn "Top" (15/10th), levelling cylinders, waterproofing "IPX4". - Tank, with rounded corners, in AISI 304 stainless steel. Discharge valve. - Electric heating by AISI 304 stainless steel armoured resistors, placed underneath the tank. ON/OFF switch, regulation from 30°C to 90°C. - Appliances built...
%
- Tank 306x510xh110 mm, superficie 15,8 dm2- Deep-drawn top thickness 15/10th - Stainless steel tank AISI 316 "COMPOUND", with high thermal conductivity - Plug and extension for discharge, supplied as standard - Electrical heating: Stainless steel armoured resistors, positioned under the tank, regulation from 120°C to 300°. - Safety device in case of overheating - Water protection degree IPX5 - Made of AISI 304 stainless steel, adjustable stainless steel feet - Appliances built in compliance...
%
Tank 306x510xh110 mm, superficie 15,8 dm2Deep-drawn top thickness 15/10thStainless steel tank AISI 316 "COMPOUND", with high thermal conductivityPlug and extension for discharge, supplied as standardElectrical heating: Stainless steel armoured resistors, positioned under the tank, regulation from 120°C to 300°.Safety device in case of overheatingWater protection degree IPX5Made of AISI 304 stainless steel, adjustable stainless steel feetAppliances built in compliance with current standards (CE)
%
Tank dimensions 630x510xh110 mm, surface 32,1 dm2. Deep-drawn top thickness 15/10thStainless steel tank AISI 316 "COMPOUND", with high thermal conductivityPlug and extension for discharge, supplied as standardElectrical heating: Stainless steel armoured resistors, positioned under the tank, regulation from 120°C to 300°.Safety device in case of overheatingWater protection degree IPX5Made of AISI 304 stainless steel, adjustable stainless steel feetAppliances built in compliance with current...
%
Tank dimensions 630x510xh110 mm, surface 32,1 dm2. Deep-drawn top thickness 15/10thStainless steel tank AISI 316 "COMPOUND", with high thermal conductivityPlug and extension for discharge, supplied as standardElectrical heating: Stainless steel armoured resistors, positioned under the tank, regulation from 120°C to 300°.Safety device in case of overheatingWater protection degree IPX5Made of AISI 304 stainless steel, adjustable stainless steel feetAppliances built in compliance with current...
%
Tank dimensions: 350x685xh160 mm, for GN containers up to 150 mm.NB: delivered without gastronorm trays. Made of AISI 304 stainless steel, deep-drawn "top" (20/10 mm), levelling cylinders, waterproof "IPX5".Tank, with rounded corners, in AISI 304 stainless steel, equipped with a perforated bottom grid and an overflow tube. For automatic water supply see A17/CLWT.Electrical heating by AISI 304 stainless steel armoured resistors, placed under the bottom of the tank. ON/OFF switch, regulation...
%
Tank dimensions: 700x685xh160 mm, for GN containers up to 150 mm.NB: delivered without gastronorm trays. Made of AISI 304 stainless steel, deep-drawn "top" (20/10 mm), levelling cylinders, waterproof "IPX5".Tank, with rounded corners, in AISI 304 stainless steel, equipped with a perforated bottom grid and an overflow tube. For automatic water supply see A17/CLWT.Electrical heating by AISI 304 stainless steel armoured resistors, placed under the bottom of the tank. ON/OFF switch, regulation...
%
Tank dimensions: 700x685xh160 mm, for GN containers up to 150 mm.NB: delivered without gastronorm trays. Made of AISI 304 stainless steel, deep-drawn "top" (20/10 mm), levelling cylinders, waterproof "IPX5".Tank, with rounded corners, in AISI 304 stainless steel, equipped with a perforated bottom grid and an overflow tube. For automatic water supply see A17/CLWT.Electrical heating by AISI 304 stainless steel armoured resistors, placed under the bottom of the tank. ON/OFF switch, regulation...
%
Tank dimensions: 700x685xh160 mm, for GN containers up to 150 mm.NB: delivered without gastronorm trays. Made of AISI 304 stainless steel, deep-drawn "top" (20/10 mm), levelling cylinders, waterproof "IPX5".Tank, with rounded corners, in AISI 304 stainless steel, equipped with a perforated bottom grid and an overflow tube. For automatic water supply see A17/CLWT.Electrical heating by AISI 304 stainless steel armoured resistors, placed under the bottom of the tank. ON/OFF switch, regulation...
%
Produces 113 kg per 24/hours.Storage in ABS, capacity 30 kg.4 lower regulation cylindersAir condenser. System with helicoidal fillings (continuous production).Evaporator in stainless steal.Tropical hermetic unit for ambience temperature +43 °C.Refrigerant gas R290 .Manufactured in stainless steel AISI 304, adjustable stainless steal feet.The equipment is manufactured following the (CE) standards in force.
%
Produces 113 kg per 24/hours.Storage in ABS, capacity 30 kg.4 lower regulation cylindersWater condenser. System with helicoidal fillings (continuous production).Evaporator in stainless steel.Tropical hermetic unit for ambience temperature +43 °C.Gas expansion R290.Manufactured in stainless steel AISI 304, adjustable stainless steel feet.The equipment is manufactured following the (CE) standards in force.
%
Produces 153 kg per 24/hours.Storage in ABS, capacity 55 kg.4 lower regulation cylindersAir condenser. System with helicoidal fillings (continuous production).Evaporator in stainless steel.Tropical hermetic unit for ambience temperature +43 °C.Gas expansion R290 .Manufactured in stainless steel AISI 304, adjustable stainless steel feet.The equipment is manufactured following the (CE) standards in force.
%
Produces 153 kg per 24/hours.Storage in ABS, capacity 55 kg.4 lower regulation cylindersWater condenser. System with helicoidal fillings (continuous production).Evaporator in stainless steel.Tropical hermetic unit for ambience temperature +43 °C.Gas expansion R290 .Manufactured in stainless steel AISI 304, adjustable stainless steel feet.The equipment is manufactured following the (CE) standards in force.
%
Production 157 kg/24/h. to combine with a storage unit.Continuous production, "worm" system, geared motor with thermal circuit breaker.Stainless steel evaporator.Air condenser (water version on request). System with helicoidal fillings (continuous production).Tropical hermetic unit for ambience temperature +43 °C.Gas expansion R290 .Manufactured in stainless steel AISI 304.Adjustable stainless steel feet.Machine without reserve to combine with an independent reserve in stainless steel, with...
%
Production 157 kg/24/h. to combine with a storage unit.Water condenser. System with helicoidal fillings (continuous production).Tropical hermetic unit for ambience temperature +43 °C.Gas expansion R290.Manufactured in stainless steel AISI 304.The equipment is manufactured following the (CE) standards in force.
%
Tank dimensions 630x510xh110 mm, surface area 32.1 dm2. Made of AISI 304 stainless steel, deep-drawn "top" (20/10 mm), adjustable stainless steel feet (150-200 mm), waterproof IPX5Tank in AISI 316 "COMPOUND" stainless steel, with high thermal conductivity.Plug and extension for discharge, supplied as standard.Electric heating: stainless steel armoured resistors, positioned under the tank, regulation from 120 to 300°C.Safety device in case of overheating.Appliances built in compliance with...
%
Tank dimensions 630x510xh110 mm, surface area 32.1 dm2. Made of AISI 304 stainless steel, deep-drawn "top" (20/10 mm), adjustable stainless steel feet (150-200 mm), waterproof IPX5Tank in AISI 316 "COMPOUND" stainless steel, with high thermal conductivity.Plug and extension for discharge, supplied as standard.Electric heating: stainless steel armoured resistors, positioned under the tank, regulation from 120 to 300°C.Safety device in case of overheating.Appliances built in compliance with...
%
Production 280 kg/24/h. to combine with a storage unit.Air condenser. System with helicoidal fillings (continuous production).Tropical hermetic unit for ambience temperature +43 °C.Gas expansion R290.Manufactured in stainless steel AISI 304.The equipment is manufactured following the (CE) standards in force.