%
Included: 3 grids (405x460 mm), with slides.4 adjustable stainless steel feet. Monobloc structure, made inside and outside (including the back) of austenitic stainless steel (food-grade), top (40 mm).Embossed interior bottom, with a large maintenance drain plug, rounded corners (smooth), stainless steel racks and slides (anti-tilt).Doors with flush-mounted handles (non-protruding), magnetic seal (easy replacement without tools), hinges with automatic return (locking at 90°).Compressor unit in...
%
7 pairs of slides EN 600x400 per door provided1 evaporator.4 adjustable stainless steel feet. One-piece structure, back, interior and exterior manufactured in (food) stainless steel.Upper top in stainless steel AISI 304 (removable) thickness (40 mm).Stamped interior bottom, with draining tap (high maintenance), rounded angles (without roughness), (adjustable) stainless steel racks and slides in (L) (65-mm spacing).(Reversible) doors with handle (not visible and not salient), magnetic joint...
%
2 ventilated evaporators.Included: 1 grid GN 1/1 (530x325 mm), by door.4 adjustable stainless steel feet.Monocoque designManufactured in stainless steel, inside AISI 304, outside AISI 441.Independent upper top (dismountable), stainless steel AISI 304.Stainless steel rack and slides (anti-tilting), allowing to place the grids as one pleases.Stamped interior bottom, rounded angles and corners (without roughness).Doors with ergonomic handle (no salient) and reversible (kit is not necessary),...
%
Refrigeration unit on the left side.2 ventilated evaporators.Included: 1 grid GN 1/1 (530x325 mm), by door.4 adjustable stainless steel feet.Monocoque designManufactured in stainless steel, inside AISI 304, outside AISI 441.Independent upper top (dismountable), stainless steel AISI 304.Stainless steel rack and slides (anti-tilting), allowing to place the grids as one pleases.Stamped interior bottom, rounded angles and corners (without roughness).Doors with ergonomic handle (no salient) and...
%
Included: 3 grids (325x535 mm), with slides.4 adjustable stainless steel feet. Monobloc structure, interior and exterior (also the back) construction in austenitic stainless steel (food), upper top (40 mm).Stamped inside bottom with draining cap (high maintenance), rounded angles and corners (without bumps), racks and slides (anti-swinging) in stainless steel.Doors, with built-in handles (not salient), magnetic joint (easy replacement, without tools), hinge with automatic return (blocking at...
%
Production 122 kg/24 h., capacity reserve 50 kg. "Paddle" system, particularly suitable for the hardest water conditions or bad quality water (algae, mud).Hollow ice cubes 20 g, ø 30 mm, h 25 mm.Ice cubes per cycle (15).Evaporator made of treaty cooper, dump ice cubes by reverse cycle "hot gas".No thermostat in the tank "too full", automatic interruption of the cycle, (the production stops when empty all the ice cubes stored in reserve).Inwardly sliding door, easy access ensuring strength and...
%
Production 22kg/24 h., capacity reserve 9 kg. "Palettes" system, particularly suitable for the hardest water conditions or bad quality water (algae, mud).Hollow ice cubes 20 g, ø 30 mm, h 25 mm.Ice cubes per cycle (15).Evaporator made of treaty cooper, dump ice cubes by reverse cycle "hot gas".No thermostat in the tank "too full", automatic interruption of the cycle, (the production stops when empty all the ice cubes stored in reserve).Inwardly sliding door, easy access ensuring strength and...
%
Production 31kg/24 h., capacity reserve 12kg. "Palettes" system, particularly suitable for the hardest water conditions or bad quality water (algae, mud).Hollow ice cubes 20 g, ø 30 mm, h 25 mm.Ice cubes per cycle (15).Evaporator made of treaty cooper, dump ice cubes by reverse cycle "hot gas".No thermostat in the tank "too full", automatic interruption of the cycle, (the production stops when empty all the ice cubes stored in reserve).Inwardly sliding door, easy access ensuring strength and...
%
Production 32 kg/24 h., capacity reserve 12kg. "Palettes" system, particularly suitable for the hardest water conditions or bad quality water (algae, mud).Hollow ice cubes 20 g, ø 30 mm, h 25 mm.Ice cubes per cycle (15).Evaporator made of treaty cooper, dump ice cubes by reverse cycle "hot gas".No thermostat in the tank "too full", automatic interruption of the cycle, (the production stops when empty all the ice cubes stored in reserve).Inwardly sliding door, easy access ensuring strength and...
%
Production 48 kg/24 h., capacity reserve 25 kg. "Paddle" system, particularly suitable for the hardest water conditions or bad quality water (algae, mud).Hollow ice cubes 20 g, ø 30 mm, h 25 mm.Ice cubes per cycle (15).Evaporator made of treaty cooper, dump ice cubes by reverse cycle "hot gas".No thermostat in the tank "too full", automatic interruption of the cycle, (the production stops when empty all the ice cubes stored in reserve).Inwardly sliding door, easy access ensuring strength and...
%
Production 55 kg/24 h., capacity reserve 30 kg. "Paddle" system, particularly suitable for the hardest water conditions or bad quality water (algae, mud).Hollow ice cubes 20 g, ø 30 mm, h 25 mm.Ice cubes per cycle (15).Evaporator made of treaty cooper, dump ice cubes by reverse cycle "hot gas".No thermostat in the tank "too full", automatic interruption of the cycle, (the production stops when empty all the ice cubes stored in reserve).Inwardly sliding door, easy access ensuring strength and...
%
Production 75 kg/24 h., capacity reserve 37kg. "Paddle" system, particularly suitable for the hardest water conditions or bad quality water (algae, mud).Hollow ice cubes 20 g, ø 30 mm, h 25 mm.Ice cubes per cycle (15).Evaporator made of treaty cooper, dump ice cubes by reverse cycle "hot gas".No thermostat in the tank "too full", automatic interruption of the cycle, (the production stops when empty all the ice cubes stored in reserve).Inwardly sliding door, easy access ensuring strength and...
%
Top plate in stainless steel, dismountable.Exterior and interior finish in stainless steel austenitic (alimentary).Angles and edges rounded off.Delivered with 1 adjustable shelf GN 1/1 each door.Electronic thermostat in closed moisture proof housing.Evaporator tubes integrated in the walls (3 sides), polyurethane insulation, without CFC's.Ventilated saladette well, automatic defrost, auto- evaporation of condensation water.Compressor group fit in climatice class 4 (mounted beneath -...
%
- Made of stainless steel AISI 441, finishing brushed and polished. - Provided with thermal insulation. - Heating by electrical resistance, with reflector allowing an uniform distribution of heat. - Modulation of heat through an energy regulator, with indicator light. - Standard: 2 side brackets for fixing in "ceiling" version. - Power cord (1500 mm) on the right. - NB Between the food heater and dishes we recommend a distance of 330 mm is necessary.PLUS:- Ideal equipment to keep all your...
%
%
- Made of stainless steel AISI 441, finishing brushed and polished. - Provided with thermal insulation. - Heating by electrical resistance, with reflector allowing an uniform distribution of heat. - Modulation of heat through an energy regulator, with indicator light. - Standard: 2 side brackets for fixing in "ceiling" version. - Power cord (1500 mm) on the right. - NB Between the food heater and dishes we recommend a distance of 330 mm is necessary.PLUS:- Ideal equipment to keep all your...
%
%
- Made of stainless steel AISI 441, finishing brushed and polished. - Provided with thermal insulation. - Heating by electrical resistance, with reflector allowing an uniform distribution of heat. - Modulation of heat through an energy regulator, with indicator light. - Standard: 2 side brackets for fixing in "ceiling" version. - Power cord (1500 mm) on the right. - NB Between the food heater and dishes we recommend a distance of 330 mm is necessary.PLUS:- Ideal equipment to keep all your...
%
%
- Made of stainless steel AISI 441, finishing brushed and polished. - Provided with thermal insulation. - Heating by electrical resistance, with reflector allowing an uniform distribution of heat. - Modulation of heat through an energy regulator, with indicator light. - Standard: 2 side brackets for fixing in "ceiling" version. - Power cord (1500 mm) on the right. - NB Between the food heater and dishes we recommend a distance of 330 mm is necessary.PLUS:- Ideal equipment to keep all your...
%
%
Included: 1 grid GN1/1 (530x325mm), per door.4 adjustable stainless steel feet.Can be installed on a base.Interior and exterior made of AISI 304 stainless steel (food grade), monocoque frameIndependent top (removable), in stainless steel (food grade) AISI 304Stainless steel racks and slides (antitilt), allowing the grids to be positioned as desired, deep-drawn inner bottom and rounded corners and angles (without rough edges)Doors with ergonomic (not protruding) and reversible handle (see Kit...
%
Refrigeration unit positioned on the leftIncluded: 1 grid GN1/1 (530x325mm), per door4 adjustable stainless steel feet.Can be installed on a base.Interior and exterior made of AISI 304 stainless steel (food grade), monocoque frameIndependent top (removable), in stainless steel (food grade) AISI 304Stainless steel racks and slides (antitilt), allowing the grids to be positioned as desired, deep-drawn inner bottom and rounded corners and angles (without rough edges)Doors with ergonomic (not...
%
Top with 50 mm edge (15/10th)Included: 4 pairs of slides for 600x400 mm plates, per door4 adjustable stainless steel feet.Can be installed on a base.Interior and exterior made of AISI 304 stainless steel (food grade), monocoque frameIndependent top top (removable), in stainless steel (food grade) AISI 304Stainless steel racks and slides (maximum capacity 8 slides, spacing 68 mm), allowing the plates to be positioned as desired, deep-drawn inner bottom and rounded corners and angles (without...