%
Mechanical controls, mats manipulated by joystick.Table version (very compact), 4 adjustable cylinders.Manual controlsVariable speed (10 rpm to 60 rpm), with Inverter.Side tables 700x500 mm (foldable)Cylinder length 500 mmRoll opening 0 - 36 mm, rolling diameter 60 mmTravel speed 35 metres/minuteClosed overall dimensions 380x920xh850.Standard: 2 pastry rollers.Strips made with specific materials for food use.Precise regulation of the thickness of the dough sheet, constant production.Scrapers...
%
Mechanical controls, mats manipulated by joystick.Table version (very compact), 4 adjustable cylinders.Manual controls.1 speed.Side tables 700x500 mm (foldable).Cylinder length 500 mm.Roll opening from 0 - 36 mm, rolling diameter 60 mm.Travel speed 35 metres/minute.Closed overall dimensions 380x920xh850.Standard: 2 pastry rollers.Strips made with specific materials for food use.Precise regulation of the thickness of the dough sheet, constant production.Scrapers and supports made with specific...
%
Wall-mounted" version with raised rear edgeIncluded: 2 grids (405x460 mm), with slides4 adjustable stainless steel feet. Monobloc structure, made inside and outside (including the back) of austenitic stainless steel (food-grade), top (40 mm).Embossed interior bottom, with a large maintenance drain plug, rounded corners (smooth), stainless steel racks and slides (anti-tilt).Doors with flush-mounted handles (non-protruding), magnetic seal (easy replacement without tools), hinges with automatic...
%
"Wall" model with back board.1 ventilated evaporator.Included: 1 grid GN 1/1 (530x325 mm), by door.4 adjustable stainless steel feet.Monocoque designManufactured in stainless steel, inside AISI 304, outside AISI 441.Independent upper top (dismountable), stainless steel AISI 304.Stainless steel rack and slides (anti-tilting), allowing to place the grids as one pleases.Stamped interior bottom, rounded angles and corners (without roughness).Doors with ergonomic handle (no salient) and reversible...
%
Refregiration unit on the left side"Wall" model with back board.1 ventilated evaporator.Included: 1 grid GN 1/1 (530x325 mm), by door.4 adjustable stainless steel feet.Monocoque designManufactured in stainless steel, inside AISI 304, outside AISI 441.Independent upper top (dismountable), stainless steel AISI 304.Stainless steel rack and slides (anti-tilting), allowing to place the grids as one pleases.Stamped interior bottom, rounded angles and corners (without roughness).Doors with ergonomic...
%
Wall-mounted" version with raised rear edge.Included: 2 GN grids (325x535 mm), with guides.4 adjustable stainless steel feet. Monobloc structure, made inside and outside (including the rear) of austenitic stainless steel (food-grade), top (40 mm).Interior bottom is embossed, with a large maintenance drain plug, rounded corners (without roughness), stainless steel grids and guides (anti-tilting).Doors with recessed handles (non-protruding), magnetic seal (easy replacement without tools),...
%
Inside dimensions: 980x620xh980.Capacity barrels Ø 425 mm (2x 50 liters - 4x 30 liters).Dismountable structure, locking of the panels by built-in "eccentric" hooks.Inside and outside realization in steel sheet (pre-painted), angles and corners without bumps.Stainless steel floor.Doors with built-in handle (not outstanding), magnetic joint (easy replacement, without any tools).Polyurethane insulation without CFC.Adjustable jacks for leveling.Appliances are complied with the CE in force.
%
- Inside dimensions: 980x885xh980.- Capacity barrels Ø 425 mm (4x 50 liters - 8x 30 liters).- Dismountable structure, locking of the panels by built-in "eccentric" hooks. - Inside and outside realization in steel sheet (pre-painted), angles and corners without bumps.- Stainless steel floor.- Doors with built-in handle (not outstanding), magnetic joint (easy replacement, without any tools). - Polyurethane insulation without CFC.- Adjustable jacks for leveling. - Appliances are complied with...
%
- Inside dimensions: 1385x885xh980.- Capacity barrels Ø 425 mm (6x 50 liters - 12x 30 liters).- Dismountable structure, locking of the panels by built-in "eccentric" hooks. - Inside and outside realization in steel sheet (pre-painted), angles and corners without bumps.- Stainless steel floor.- Doors with built-in handle (not outstanding), magnetic joint (easy replacement, without any tools). - Polyurethane insulation without CFC.- Adjustable jacks for leveling. - Appliances are complied with...
%
- Inside dimensions: 1790x885xh980.- Capacity barrels Ø 425 mm (8x 50 liters - 16x 30 liters).- Dismountable structure, locking of the panels by built-in "eccentric" hooks. - Inside and outside realization in steel sheet (pre-painted), angles and corners without bumps.- Stainless steel floor.- Doors with built-in handle (not outstanding), magnetic joint (easy replacement, without any tools). - Polyurethane insulation without CFC.- Adjustable jacks for leveling. - Appliances are complied with...
%
Wall-mounted version with raised rear edgeIncluded: 1 grid GN1/1 (530x325mm), per door4 adjustable stainless steel feet.Can be installed on a base.Interior and exterior made of AISI 304 stainless steel (food grade), monocoque frameIndependent top (removable), in stainless steel (food grade) AISI 304Stainless steel racks and slides (antitilt), allowing the grids to be positioned as desired, deep-drawn inner bottom and rounded corners and angles (without rough edges)Doors with ergonomic (not...
%
%
Refrigeration unit positioned on the left.Wall-mounted version with raised rear edge.Included: 1 grid GN1/1 (530x325mm), per door.4 adjustable stainless steel feet.Can be installed on a base.Interior and exterior made of AISI 304 stainless steel (food grade), monocoque frameIndependent top (removable), in stainless steel (food grade) AISI 304Stainless steel racks and slides (antitilt), allowing the grids to be positioned as desired, deep-drawn inner bottom and rounded corners and angles...
%
Wall" version with raised rear edge 100-150 mm "straight".Top with 50 mm edge (15/10th)Included: 4 pairs of slides for 600x400 mm plates, per door4 adjustable stainless steel feet.Can be installed on a base.Interior and exterior made of AISI 304 stainless steel (food grade), monocoque frameIndependent top top (removable), in stainless steel (food grade) AISI 304Stainless steel racks and slides (maximum capacity 8 slides, spacing 68 mm), allowing the plates to be positioned as desired,...
%
Monoblock unit, climate class 5 (40°C Temperature & 40% Humidity), equipped with 2 side handles (easily removable), ventilated condenser.Ventilated evaporator treated against the salt and the food acids.Refrigerant gas R455a.Programmable electronic regulator, display on front with blue LED.Automatic defrosting by reversal of cycle (programmable as one pleases), automatic evaporation of the condensate.Appliances are complied with the CE in force.
%
Sink 340x400x200mm integrated in the work top (right side), delivered with a siphon; drain screen and overflow (NB: tap on request, opening on the work top (27 mm)."Wall" model with turned-up back edge.1 ventilated evaporator.Included: 1 grid GN 1/1 (530x325 mm), per door.4 adjustable stainless steel feet.Monocoque designManufactured in stainless steel, inside AISI 304, outside AISI 441.Independent upper top (dismountable), stainless steel AISI 304.Stainless steel rack and slides...