%
%
Stainless steel sheet structure, brushed finishing. Insulated withexpanded polyurethane panels.Insulated top lids opening outwards through 180° to form supportsurfaces, complete with edges to retain condensation.Pressed stainless steel basin without sharp edges, withthermostats, for GN containers up to 20 cm depth (not included).Heated with dry resistance elements underneath each basin.Insulated movement handles.Edge bumper strips in grey non-marking rubber.Castors diam. 16 cm, with two...
%
%
Made of ABS, easily removable tank, easy cleaning. Ventilated motor 2800 rpm.Standard 1 smooth knife and a mixer in ABS.Safety micro-switch.Lid in transparent Lexan, the addition of ingredients is possible thanks to a hole on the lid.Scraper as standard.Low voltage 24V controls, protection class (IP67), NVR (No-Voltage Release).
%
Turns per minute: 2600 rpm.Tank capacity: 3,3 Lt.Useful tank capacity: 1,5 Lt. Made of stainless steel AISI 304.18/10 stainless steel tank, thermo-diffuser bottom, transportable tank equipped with handles, easy to empty and wash.Ventilated motor, (for intensive use) (switchable 400V & 230V/3).No heat transmission on the product (motor and tank are side by side).Very sturdy knife (standard 1 smooth knife), with curved blades in hardened "cutlery" steel.High safety guaranteed by a double...
%
- Turns/minute: rpm 145.- Duration of the production cycle 90-120 sec.- Color BLACK.- Stainless steel undercarriage AISI 304.- Stainless steel tank AISI 304, 100% hygienic, without rough part and rounded edges. - Plexiglas see-through lid allowing a field of vision of the production, safety DIP switch.- Abrasive turning trays and walls also fitted with an abrasive tape (both are easily transportable for the cleaning, the operations don't require any specialized labor). - Digital control panel...
%
Table top model.Made of AISI 304 stainless steel.Powerful motor. The rotor works in oil-bath and it's equipped with a double sealing system.Safety microswitch on the cover.Removable AISI 304 stainless steel mixing arm (no tools required).Front outlet opening for shaft removal and product unload.IP 54 on/off switch with NVR (24 V) and reverse for a better mix.Machine produced in accordance with the actual CE standards.
%
- Turns/minute: Rpm 270.- Duration of the production cycle 60-90 sec.- Color BLACK.- Stainless steel undercarriage AISI 304.- Stainless steel tank AISI 304, 100% hygienic, without rough part and rounded edges. - Plexiglas see-through lid allowing a field of vision of the production, safety DIP switch.- Abrasive turning trays and walls also fitted with an abrasive tape (both are easily transportable for the cleaning, the operations don't require any specialized labor). - Digital control panel...
%
Designed in stainless steel.ON/OFF switch.Shielded steel element heating.Strengthened protection cables for a better security, without affecting the heat distributionLateral supports for heating bridge.Chromium-plated feet, in the shape of "C".Free space underneath the heating bridge: 343 mm.
%
Fitted with ceramic heating elements, ON/OFF switch.Incandescent lights.Very solid breath barrier (right).Heating base plate, gradual regulation of the heat intensity.
%
Model to put down."Toggle" switch.Free space underneath the 356 mm heating bridge.Base for GN 1/1.Infrared heating element above the tray, ON/OFF switch.Electric cable, 1829 mm, with plug.
%
Model to put down."Toggle" switch.Free space underneath the 356 mm heating bridge.Base for GN 1/1 sterilizer.Infrared heating element above the plate, ON/OFF switch.Electric cable, 1829 mm, with plug.
%
Fitted with ceramic heating elements, ON/OFF switch.Incandescent lights.Very solid breath barrier (right).Neutral base plate.
%
Tank: 310x690xh160 mm, trays GN-150 mm. (NB: GN trays not included).Cupboard (GN 1/1) (340x940xh360 mm). Made in stainless steel AISI 304, adjustable feet in stainless steel.Waterproof top (20/10 mm) in stainless steel AISI 304.Chimney in stainless steel AISI 304. "Stamped" tank in stainless steel AISI 304 welded (continuous), with all corners and interior corners rounded for easy and hygienic maintenance, a drain valve (bullet) is placed on the front of the unit. Electric heating by...
%
Dimensions of the basin: 306x510xh156 mm, for GN trays till 150 mm.NB: delivered without GN tray. Made of AISI 304 stainless steel, deep-drawn "Top" (15/10th), levelling cylinders, waterproofing "IPX4".Tank, with rounded corners, in AISI 304 stainless steel. Discharge valve.Electric heating by AISI 304 stainless steel armoured resistors, placed underneath the tank. ON/OFF switch, regulation from 30°C to 90°C.Appliances built in compliance with current standards (CE)
%
- Dimensiones tanque: 630x510xh156 mm, para cubas GN de hasta 150 mm. - Para el suministro automático de agua E17/BM8T ver A17/R2BM. - Nota: se suministra sin cubas Gastronorm.- De acero inoxidable AISI 304, "top" embutido de 15/10 mm de espesor, patas niveladoras, impermeable "IPX4" - Tanque con esquinas redondeadas, de acero inoxidable AISI 304. Válvula de drenaje. - Calefacción eléctrica con elementos calefactores blindados de acero inoxidable AISI 304, situados bajo el depósito....
%
- Tank dimensions: 630x510xh156 mm, for GN trays up to 150 mm. - For automatic water supply E17/BM8T See (A17/R2BM).- NB: delivered without gastronorm tray.- Made of AISI 304 stainless steel, deep-drawn "Top" (15/10th), levelling cylinders, waterproofing "IPX4". - Tank, with rounded corners, in AISI 304 stainless steel. Discharge valve. - Electric heating by AISI 304 stainless steel armoured resistors, placed underneath the tank. ON/OFF switch, regulation from 30°C to 90°C. - Appliances built...
%
Tank dimensions: 350x685xh160 mm, for GN containers up to 150 mm.NB: delivered without gastronorm trays. Made of AISI 304 stainless steel, deep-drawn "top" (20/10 mm), levelling cylinders, waterproof "IPX5".Tank, with rounded corners, in AISI 304 stainless steel, equipped with a perforated bottom grid and an overflow tube. For automatic water supply see A17/CLWT.Electrical heating by AISI 304 stainless steel armoured resistors, placed under the bottom of the tank. ON/OFF switch, regulation...
%
Tank dimensions: 700x685xh160 mm, for GN containers up to 150 mm.NB: delivered without gastronorm trays. Made of AISI 304 stainless steel, deep-drawn "top" (20/10 mm), levelling cylinders, waterproof "IPX5".Tank, with rounded corners, in AISI 304 stainless steel, equipped with a perforated bottom grid and an overflow tube. For automatic water supply see A17/CLWT.Electrical heating by AISI 304 stainless steel armoured resistors, placed under the bottom of the tank. ON/OFF switch, regulation...
%
Tank dimensions: 700x685xh160 mm, for GN containers up to 150 mm.NB: delivered without gastronorm trays. Made of AISI 304 stainless steel, deep-drawn "top" (20/10 mm), levelling cylinders, waterproof "IPX5".Tank, with rounded corners, in AISI 304 stainless steel, equipped with a perforated bottom grid and an overflow tube. For automatic water supply see A17/CLWT.Electrical heating by AISI 304 stainless steel armoured resistors, placed under the bottom of the tank. ON/OFF switch, regulation...
%
Tank dimensions: 700x685xh160 mm, for GN containers up to 150 mm.NB: delivered without gastronorm trays. Made of AISI 304 stainless steel, deep-drawn "top" (20/10 mm), levelling cylinders, waterproof "IPX5".Tank, with rounded corners, in AISI 304 stainless steel, equipped with a perforated bottom grid and an overflow tube. For automatic water supply see A17/CLWT.Electrical heating by AISI 304 stainless steel armoured resistors, placed under the bottom of the tank. ON/OFF switch, regulation...
%
- Tank dimensions: 245x465xh170 mm, for GN containers up to 150 mm.- Made of stainless steel AISI 304, levelling feet. - Tank in AISI 304 stainless steel, equipped as standard with a perforated bottom grid, a drain cock (ball valve) is placed on the front of the appliance. - Electric heating, by means of stainless steel armoured resistances, placed under the bottom of the tank, outside. ON/OFF switch, temperature regulation from 30°C to 90°C, by thermostat. - The appliance is built in...
%
Tank dimensions: 510x465xh170 mm, for GN containers up to 150 mm. Made of stainless steel AISI 304, levelling feet.Tank in AISI 304 stainless steel, equipped as standard with a perforated bottom grid, a drain cock (ball valve) is placed on the front of the appliance.Electric heating, by means of stainless steel armoured resistances, placed under the bottom of the tank, outside. ON/OFF switch, temperature regulation from 30°C to 90°C, by thermostat.The appliance is built in compliance with all...
%
Tank dimensions: 510x465xh170 mm, for GN containers up to 150 mm. Made of stainless steel AISI 304, levelling feet.Tank in AISI 304 stainless steel, equipped as standard with a perforated bottom grid, a drain cock (ball valve) is placed on the front of the appliance.Electric heating, by means of stainless steel armoured resistances, placed under the bottom of the tank, outside. ON/OFF switch, temperature regulation from 30°C to 90°C, by thermostat.The appliance is built in compliance with all...