%
Realisation "double walled".Loading height for trays 650mmCID door (double wall) with automatic closing "soft contact" (partial opening for steam evacuation)Double door guillotine (isolated double wall) and counterbalanced.Standard rinsing pump (atmospheric boiler)Cycles 120''- 240'' - 360'' or continuous.Rotating washing and rinsing arms.Self-cleaning nozzles.Deep-drawn walls.Adjustable stainless steel feet (160-220 mm).Removable control panel.USB" port for software update.Pump increasing...
%
%
Stainless steel sheet structure, brushed finishing. Insulated withexpanded polyurethane panels.Insulated top lids opening outwards through 180° to form supportsurfaces, complete with edges to retain condensation.Pressed stainless steel basin without sharp edges, withthermostats, for GN containers up to 20 cm depth (not included).Heated with dry resistance elements underneath each basin.Insulated movement handles.Edge bumper strips in grey non-marking rubber.Castors diam. 16 cm, with two...
%
Structure en tôle d'acier inox, finition brossée. Isolés avec despanneaux de polyuréthane expansé.Des couvercles supérieurs ouvrables à 180°, pour former un plan detravail, dotés de bord de limitation de condensation.Bassins inox emboutis et dépourvus d'arêtes, avec thermomètre/ thermostats indépendants, pour récipients GN et profondeur 20 cm (non inclus).Chauffants avec éléments de résistance à sec sous chaque cuve.Compartiment neutre inférieur, fermé avec porte à charnièrerabattable vers...
%
"Wall" model with back board.Glass doors with integrated LED-light.2 ventilated evaporators.Included: 1 grid GN 1/1 (530x325 mm), by door.6 adjustable stainless steel feet.Monocoque designManufactured in stainless steel, inside AISI 304, outside AISI 441.Independent upper top (dismountable), stainless steel AISI 304.Stainless steel rack and slides (anti-tilting), allowing to place the grids as one pleases.Stamped interior bottom, rounded angles and corners (without rougness).Doors with...
%
Tank: 310x690xh160 mm, trays GN-150 mm. (NB: GN trays not included).Cupboard (GN 1/1) (340x940xh360 mm). Made in stainless steel AISI 304, adjustable feet in stainless steel.Waterproof top (20/10 mm) in stainless steel AISI 304.Chimney in stainless steel AISI 304. "Stamped" tank in stainless steel AISI 304 welded (continuous), with all corners and interior corners rounded for easy and hygienic maintenance, a drain valve (bullet) is placed on the front of the unit. Electric heating by...
%
Dimensions of the basin: 306x510xh156 mm, for GN trays till 150 mm.NB: delivered without GN tray. Made of AISI 304 stainless steel, deep-drawn "Top" (15/10th), levelling cylinders, waterproofing "IPX4".Tank, with rounded corners, in AISI 304 stainless steel. Discharge valve.Electric heating by AISI 304 stainless steel armoured resistors, placed underneath the tank. ON/OFF switch, regulation from 30°C to 90°C.Appliances built in compliance with current standards (CE)
%
- Dimensiones tanque: 630x510xh156 mm, para cubas GN de hasta 150 mm. - Para el suministro automático de agua E17/BM8T ver A17/R2BM. - Nota: se suministra sin cubas Gastronorm.- De acero inoxidable AISI 304, "top" embutido de 15/10 mm de espesor, patas niveladoras, impermeable "IPX4" - Tanque con esquinas redondeadas, de acero inoxidable AISI 304. Válvula de drenaje. - Calefacción eléctrica con elementos calefactores blindados de acero inoxidable AISI 304, situados bajo el depósito....
%
- Tank dimensions: 630x510xh156 mm, for GN trays up to 150 mm. - For automatic water supply E17/BM8T See (A17/R2BM).- NB: delivered without gastronorm tray.- Made of AISI 304 stainless steel, deep-drawn "Top" (15/10th), levelling cylinders, waterproofing "IPX4". - Tank, with rounded corners, in AISI 304 stainless steel. Discharge valve. - Electric heating by AISI 304 stainless steel armoured resistors, placed underneath the tank. ON/OFF switch, regulation from 30°C to 90°C. - Appliances built...
%
Tank dimensions: 350x685xh160 mm, for GN containers up to 150 mm.NB: delivered without gastronorm trays. Made of AISI 304 stainless steel, deep-drawn "top" (20/10 mm), levelling cylinders, waterproof "IPX5".Tank, with rounded corners, in AISI 304 stainless steel, equipped with a perforated bottom grid and an overflow tube. For automatic water supply see A17/CLWT.Electrical heating by AISI 304 stainless steel armoured resistors, placed under the bottom of the tank. ON/OFF switch, regulation...
%
Tank dimensions: 700x685xh160 mm, for GN containers up to 150 mm.NB: delivered without gastronorm trays. Made of AISI 304 stainless steel, deep-drawn "top" (20/10 mm), levelling cylinders, waterproof "IPX5".Tank, with rounded corners, in AISI 304 stainless steel, equipped with a perforated bottom grid and an overflow tube. For automatic water supply see A17/CLWT.Electrical heating by AISI 304 stainless steel armoured resistors, placed under the bottom of the tank. ON/OFF switch, regulation...
%
Tank dimensions: 700x685xh160 mm, for GN containers up to 150 mm.NB: delivered without gastronorm trays. Made of AISI 304 stainless steel, deep-drawn "top" (20/10 mm), levelling cylinders, waterproof "IPX5".Tank, with rounded corners, in AISI 304 stainless steel, equipped with a perforated bottom grid and an overflow tube. For automatic water supply see A17/CLWT.Electrical heating by AISI 304 stainless steel armoured resistors, placed under the bottom of the tank. ON/OFF switch, regulation...
%
Tank dimensions: 700x685xh160 mm, for GN containers up to 150 mm.NB: delivered without gastronorm trays. Made of AISI 304 stainless steel, deep-drawn "top" (20/10 mm), levelling cylinders, waterproof "IPX5".Tank, with rounded corners, in AISI 304 stainless steel, equipped with a perforated bottom grid and an overflow tube. For automatic water supply see A17/CLWT.Electrical heating by AISI 304 stainless steel armoured resistors, placed under the bottom of the tank. ON/OFF switch, regulation...
%
- Tank dimensions: 245x465xh170 mm, for GN containers up to 150 mm.- Made of stainless steel AISI 304, levelling feet. - Tank in AISI 304 stainless steel, equipped as standard with a perforated bottom grid, a drain cock (ball valve) is placed on the front of the appliance. - Electric heating, by means of stainless steel armoured resistances, placed under the bottom of the tank, outside. ON/OFF switch, temperature regulation from 30°C to 90°C, by thermostat. - The appliance is built in...
%
Tank dimensions: 510x465xh170 mm, for GN containers up to 150 mm. Made of stainless steel AISI 304, levelling feet.Tank in AISI 304 stainless steel, equipped as standard with a perforated bottom grid, a drain cock (ball valve) is placed on the front of the appliance.Electric heating, by means of stainless steel armoured resistances, placed under the bottom of the tank, outside. ON/OFF switch, temperature regulation from 30°C to 90°C, by thermostat.The appliance is built in compliance with all...
%
Tank dimensions: 510x465xh170 mm, for GN containers up to 150 mm. Made of stainless steel AISI 304, levelling feet.Tank in AISI 304 stainless steel, equipped as standard with a perforated bottom grid, a drain cock (ball valve) is placed on the front of the appliance.Electric heating, by means of stainless steel armoured resistances, placed under the bottom of the tank, outside. ON/OFF switch, temperature regulation from 30°C to 90°C, by thermostat.The appliance is built in compliance with all...
%
Dimensions of the basin: 325x535xh175 mm, for GN containers till 150 mm.Manufactured in stainless steel 18/10 AISI 304.Basin in stainless steel AISI 304, standard equipped with perforated bottom plate, (bullet) outlet tap is served frontally.Electric heating, through armoured resistances in stainless steel, placed straightly underneath the bassin. ON/OFF switch, Temperature regulation through thermostat from 30°C to 90°C.
%
Dimensions of the basin : 650x535xh175 mm, for GN containers till 150 mm.Manufactured in stainless steel 18/10 AISI 304.Basin in stainless steel AISI 304, standard equipped with perforated bottom plate, (bullet) outlet tap is served frontally.Electric heating, through armoured resistances in stainless steel, placed straightly underneath the bassin. ON/OFF switch, Temperature regulation through thermostat from 30°C to 90°C.
%
- Tank dimensions: 310x510xh160mm, for GN containers up to 150 mm.NB : delivered without gastronorm containers.Made of stainless steel AISI 304, adjustable cylinders.Watertight top (15/10 mm) in stainless steel AISI 304.Rear chimney in stainless steel AISI 304.Stamped" bowl in AISI 304 stainless steel welded (continuous), with all corners and inside angles rounded for easy and hygienic maintenance, a drain cock (with ball) is placed on the front of the appliance.Electric heating, by means of...
%
- Tank dimensions: 630x510xh160mm, for GN containers up to 150 mm.NB : delivered without gastronorm containers.Made of stainless steel AISI 304, adjustable cylinders.Watertight top (15/10 mm) in stainless steel AISI 304.Rear chimney in stainless steel AISI 304.Stamped" bowl in AISI 304 stainless steel welded (continuous), with all corners and inside angles rounded for easy and hygienic maintenance, a drain cock (with ball) is placed on the front of the appliance.Electric heating, by means of...
%
Dimensions tank : 630x510xh160 mm, for GN container 150 mm.NB. GN not included. Manufactured in stainless steel AISI 304, with adjustable feet in stainless steel.Top pressed with lateral edges.Tank "pressed" in stainless steel AISI 304, with interior round angles for easy maintenance, drainage tap (bullet) sited in front of the machine.Electric heater, with armoured heating element made in stainless steel, switch ON/OFF, thermostatic temperature control 30°C to 90°C.
%
Tank: 310x690xh160 mm, trays GN-150 mm. (NB: GN trays not included).Neutral cupboard (GN 1/1) (360x740xh360 mm).Made in stainless steel AISI 304, adjustable feet in stainless steel.Waterproof top (20/10 mm) in stainless steel AISI 304.Chimney in the back in stainless steel AISI 304. "Stamped" tank in stainless steel AISI 304 welded (continuous), with all corners and interior corners rounded for easy and hygienic maintenance, a drain valve (bullet) is placed on the front of the unit. Electric...
%
Tank: 630x690xh160 mm, trays GN-150 mm. (NB: GN trays not included).Open cupboard (GN 2/1) (760x740xh360 mm).Made in stainless steel AISI 304, adjustable feet in stainless steel.Waterproof top (20/10 mm) in stainless steel AISI 304.Chimney in the back in stainless steel AISI 304. "Stamped" tank in stainless steel AISI 304 welded (continuous), with all corners and interior corners rounded for easy and hygienic maintenance, a drain valve (bullet) is placed on the front of the unit. Electric...
%
Tank : 325x535xh175 mm, GN until 150 mm.Designed for building-in 385x585 mmControl box delivered separatelyNB : delivered without GN container.Tank in stainless steel AISI 304, with one perforated base grill, drainage tap (bullet) put under the machine.Heating by armoured elements made of stainless steel, put under the bottom of the tank, outside.On/Off switch, with indicator lampRegulation from 30° to 90°C, by thermostat.Manufactured in stainless steel AISI 304.NB : delivered without GN...