%
Compact, but with a large cutting capacity, realized in anodized and polished aluminum alloy.Sanitary polished and anodized aluminium alloy, hardened, chromed stainless blade, permanent tapered blade ring guard and interlocked blade guard (100% safe).Reinforced gauge plate, max. cutting capacity 250xh185 (Ø 210 mm) slice thickness 0-13 mm.Carriage sliding on stainless bearings for an easy and quiet operation, a plexiglass hand guard comes standard.Stainless steel screws and...
%
Compact machine but with an important cutting capacity.Hardened, chrome-plated and ground steel blade (Ø 300 mm), fixed protection ring and blade cover with microswitch (100% safety).Sliding of the carriage on self-lubricating bushings and ground pins.Stainless steel screws.Built-in aluminium sharpener with 2 emery wheels. On/off switch, protection class IP 44.Ventilated motor, lower protection, with direct access to the electrical elements, sealing ring on the transmission pulley,...
%
Gravity feed, 38° inclination.Max. cutting capacity 230xh175 (Ø 200 mm), slice thickness 0-30 mm.41 mm gap between blade and body. Stylish and performing, sanitary polished and anodized aluminium alloy, hardened, chromed stainless blade, permanent tapered blade ring guard and interlocked blade guard (100% safe).Reinforced gauge plate, removable slider guard.Carriage sliding on stainless bearings for an easy and quiet operation, polished, chromed and hardened sliding bar, vulcanized rubber...
%
Version with vertical blade.Double-feed carriage with a clamping arm holding firmly in place all cold meats.Cutting capacity 275 mm, plate 275xh260 mm.Cutting thickness 0-30 mm. Rounded design, no corners and sharp edges and no visible screws.Blade (Ø 300 mm) made of hardened steel, chrome and improved, tapered blade ring guard and interlocked blade guard (100% safe).Ashes of the cutting carriage in chrome, improved and polished.Carriage sliding on stainless bearings for an easy and quiet...
%
Made of "anodized aluminum", food treated.Blade in stainless steel AISI 304.Sliding carriage with transparent Plexiglas protection.Cutting capacity : 200x260 mm.Sharpening device, delivered separately, with adapter.Cutting adjustment from 0-15 mm.Easily removable blade guard.No volt release" device that prevents the machine from starting during the cleaning phase.Low voltage control 24 V, protection class IP65.Safety microswitch on the blade.Blade cover ring (100% protection).The machine is...
%
%
Stainless steel sheet structure, brushed finishing. Insulated withexpanded polyurethane panels.Insulated top lids opening outwards through 180° to form supportsurfaces, complete with edges to retain condensation.Pressed stainless steel basin without sharp edges, withthermostats, for GN containers up to 20 cm depth (not included).Heated with dry resistance elements underneath each basin.Insulated movement handles.Edge bumper strips in grey non-marking rubber.Castors diam. 16 cm, with two...
%
%
%
%
Tank: 310x690xh160 mm, trays GN-150 mm. (NB: GN trays not included).Cupboard (GN 1/1) (340x940xh360 mm). Made in stainless steel AISI 304, adjustable feet in stainless steel.Waterproof top (20/10 mm) in stainless steel AISI 304.Chimney in stainless steel AISI 304. "Stamped" tank in stainless steel AISI 304 welded (continuous), with all corners and interior corners rounded for easy and hygienic maintenance, a drain valve (bullet) is placed on the front of the unit. Electric heating by...
%
Dimensions of the basin: 306x510xh156 mm, for GN trays till 150 mm.NB: delivered without GN tray. Made of AISI 304 stainless steel, deep-drawn "Top" (15/10th), levelling cylinders, waterproofing "IPX4".Tank, with rounded corners, in AISI 304 stainless steel. Discharge valve.Electric heating by AISI 304 stainless steel armoured resistors, placed underneath the tank. ON/OFF switch, regulation from 30°C to 90°C.Appliances built in compliance with current standards (CE)
%
- Dimensiones tanque: 630x510xh156 mm, para cubas GN de hasta 150 mm. - Para el suministro automático de agua E17/BM8T ver A17/R2BM. - Nota: se suministra sin cubas Gastronorm.- De acero inoxidable AISI 304, "top" embutido de 15/10 mm de espesor, patas niveladoras, impermeable "IPX4" - Tanque con esquinas redondeadas, de acero inoxidable AISI 304. Válvula de drenaje. - Calefacción eléctrica con elementos calefactores blindados de acero inoxidable AISI 304, situados bajo el depósito....
%
- Tank dimensions: 630x510xh156 mm, for GN trays up to 150 mm. - For automatic water supply E17/BM8T See (A17/R2BM).- NB: delivered without gastronorm tray.- Made of AISI 304 stainless steel, deep-drawn "Top" (15/10th), levelling cylinders, waterproofing "IPX4". - Tank, with rounded corners, in AISI 304 stainless steel. Discharge valve. - Electric heating by AISI 304 stainless steel armoured resistors, placed underneath the tank. ON/OFF switch, regulation from 30°C to 90°C. - Appliances built...
%
Tank dimensions: 350x685xh160 mm, for GN containers up to 150 mm.NB: delivered without gastronorm trays. Made of AISI 304 stainless steel, deep-drawn "top" (20/10 mm), levelling cylinders, waterproof "IPX5".Tank, with rounded corners, in AISI 304 stainless steel, equipped with a perforated bottom grid and an overflow tube. For automatic water supply see A17/CLWT.Electrical heating by AISI 304 stainless steel armoured resistors, placed under the bottom of the tank. ON/OFF switch, regulation...
%
Tank dimensions: 700x685xh160 mm, for GN containers up to 150 mm.NB: delivered without gastronorm trays. Made of AISI 304 stainless steel, deep-drawn "top" (20/10 mm), levelling cylinders, waterproof "IPX5".Tank, with rounded corners, in AISI 304 stainless steel, equipped with a perforated bottom grid and an overflow tube. For automatic water supply see A17/CLWT.Electrical heating by AISI 304 stainless steel armoured resistors, placed under the bottom of the tank. ON/OFF switch, regulation...
%
Tank dimensions: 700x685xh160 mm, for GN containers up to 150 mm.NB: delivered without gastronorm trays. Made of AISI 304 stainless steel, deep-drawn "top" (20/10 mm), levelling cylinders, waterproof "IPX5".Tank, with rounded corners, in AISI 304 stainless steel, equipped with a perforated bottom grid and an overflow tube. For automatic water supply see A17/CLWT.Electrical heating by AISI 304 stainless steel armoured resistors, placed under the bottom of the tank. ON/OFF switch, regulation...
%
Tank dimensions: 700x685xh160 mm, for GN containers up to 150 mm.NB: delivered without gastronorm trays. Made of AISI 304 stainless steel, deep-drawn "top" (20/10 mm), levelling cylinders, waterproof "IPX5".Tank, with rounded corners, in AISI 304 stainless steel, equipped with a perforated bottom grid and an overflow tube. For automatic water supply see A17/CLWT.Electrical heating by AISI 304 stainless steel armoured resistors, placed under the bottom of the tank. ON/OFF switch, regulation...
%
- Tank dimensions: 245x465xh170 mm, for GN containers up to 150 mm.- Made of stainless steel AISI 304, levelling feet. - Tank in AISI 304 stainless steel, equipped as standard with a perforated bottom grid, a drain cock (ball valve) is placed on the front of the appliance. - Electric heating, by means of stainless steel armoured resistances, placed under the bottom of the tank, outside. ON/OFF switch, temperature regulation from 30°C to 90°C, by thermostat. - The appliance is built in...
%
Tank dimensions: 510x465xh170 mm, for GN containers up to 150 mm. Made of stainless steel AISI 304, levelling feet.Tank in AISI 304 stainless steel, equipped as standard with a perforated bottom grid, a drain cock (ball valve) is placed on the front of the appliance.Electric heating, by means of stainless steel armoured resistances, placed under the bottom of the tank, outside. ON/OFF switch, temperature regulation from 30°C to 90°C, by thermostat.The appliance is built in compliance with all...
%
Tank dimensions: 510x465xh170 mm, for GN containers up to 150 mm. Made of stainless steel AISI 304, levelling feet.Tank in AISI 304 stainless steel, equipped as standard with a perforated bottom grid, a drain cock (ball valve) is placed on the front of the appliance.Electric heating, by means of stainless steel armoured resistances, placed under the bottom of the tank, outside. ON/OFF switch, temperature regulation from 30°C to 90°C, by thermostat.The appliance is built in compliance with all...
%
Dimensions of the basin: 325x535xh175 mm, for GN containers till 150 mm.Manufactured in stainless steel 18/10 AISI 304.Basin in stainless steel AISI 304, standard equipped with perforated bottom plate, (bullet) outlet tap is served frontally.Electric heating, through armoured resistances in stainless steel, placed straightly underneath the bassin. ON/OFF switch, Temperature regulation through thermostat from 30°C to 90°C.
%
Dimensions of the basin : 650x535xh175 mm, for GN containers till 150 mm.Manufactured in stainless steel 18/10 AISI 304.Basin in stainless steel AISI 304, standard equipped with perforated bottom plate, (bullet) outlet tap is served frontally.Electric heating, through armoured resistances in stainless steel, placed straightly underneath the bassin. ON/OFF switch, Temperature regulation through thermostat from 30°C to 90°C.
%
- Tank dimensions: 310x510xh160mm, for GN containers up to 150 mm.NB : delivered without gastronorm containers.Made of stainless steel AISI 304, adjustable cylinders.Watertight top (15/10 mm) in stainless steel AISI 304.Rear chimney in stainless steel AISI 304.Stamped" bowl in AISI 304 stainless steel welded (continuous), with all corners and inside angles rounded for easy and hygienic maintenance, a drain cock (with ball) is placed on the front of the appliance.Electric heating, by means of...