%
2 professional magnetrons, adequate for intensive use. Mechanic control, 5 power levels. Programmable timer key for 20 seconds use at the highest power. Outgoing power 1850 W. Easy cleaning of the aeration filter. Dimensions int.: 370x370xh190 mm Content 26 litres. Stackable units Interior and exterior manufactured in stainless steel.
%
Cooking on 2 levels, inner chamber of 535x330xh250 mm.4 professional microwave ovens of 450 W, specially designed for intensive use, power 1800 W.Mechanic control, programmable clock (60 min.).Capacity 44 liters, 4 power levels.Inner- and outer finishing in stainless steel, swinging door.
%
Cooking on 2 levels, inner chamber of 535x330xh250 mm.4 professional microwave ovens of 525 W, specially designed for intensive use, power 2100 W.Mechanic control, programmable clock (60 min.).Capacity 44 liters, 4 power levels.Inner- and outer finishing in stainless steel, swinging door.
%
Cooking on 2 levels, inner chamber of 535x330xh250 mm.4 professional microwave ovens of 800 W, specially designed for intensive use, power 3200 W.Mechanic control, programmable clock (60 min.).Capacity 44 liters, 4 power levels.Inner- and outer finishing in stainless steel, swinging door.
%
Expansion refrigerant R600aInternal dimensions: 890x510xh715Mechanical thermostat, T° -23° +10Digital thermometer.Internal capacity 289 liters. Double temperature (refrigeration/freezing)Solid lid, sliding.Digital thermometer.On/Off switch.Hermetic unit for ambient T° +32°, ventilated condenser.Static evaporator, placed in the "serpentine" walls.Manual defrost.External construction in white painted steel sheet.Internal realization, embossed aluminium.Insulation in CFC-free polyurethane.Frame...
%
Expansion refrigerant R600a.Internal dimensions: 890x510xh630. Mechanical thermostat, T°+1° +10°.Internal capacity 289 liters. Solid lid, sliding.Lock with key.On/Off switch.Hermetic unit for ambient T° +32°, ventilated condenser.Static evaporator, placed in the "coil" walls.Manual defrosting.External construction in white lacquered steel sheet.Interior construction in embossed aluminium.Insulation in CFC-free polyurethane.Frame on swivel wheels, 2 of which have brakes.The unit is built in...
%
2 professional magnetrons, for intensive useInternal LED lightingMechanical controls, 5 power levels Pre-programmed button for use during 20 seconds (at the highest power)Power output (rendered) 1850 WEasy cleaning of the ventilation filterInternal dimensions: 370x370xh190 mm Content 26 litersStackable appliances Interior and exterior stainless steel construction
%
Output power 1800 W2 magnetron (1 in the top, 1 under the base of the oven), for a very intensive professional use!Mechanical control panel: 2 buttons, selection with 7 power levels and timer select or (0 to 60 minutes) with end cycle sound and visual displaySelf-diagnostic device in case of anomalies.100 "storable" programsAs standard with middle shelf in treated glass (removable) (350x350mm).Capacity 34 liters, with the possibility of using GN 2/3, 1/2, 1/3, 1/4 ... dishes up to ø 350...
%
Basin manufactured in stainless steel AISI 304,bottom in stainless steel AISI 316.Diameter of the basin 420, depth 485 mm.Outlet tap of 1",1/2. Made of 18/10 AISI 304 stainless steel, deep-drawn "Top" thickness 15/10th, adjustable stainless steel feet (150/200 mm), waterproof "IPX5".Deep-drawn" tank made of AISI 316 stainless steel, bottom 30/10 mm thick, side walls 20/10 mm thick, resistant to salt corrosion and wear, equipped with a removable strainer to protect the drain valve. Water tap...
%
Basin manufactured in stainless steel AISI 304,bottom in stainless steel AISI 316.Diameter of the basin 420, depth 485 mm.Outlet tap of 1",1/2. Made of 18/10 AISI 304 stainless steel, deep-drawn "Top" thickness 15/10th, adjustable stainless steel feet (150/200 mm), waterproof "IPX5".Deep-drawn" tank made of AISI 316 stainless steel, bottom 30/10 mm thick, side walls 20/10 mm thick, resistant to salt corrosion and wear, equipped with a removable strainer to protect the drain valve. Water tap...
%
Tank diameter 600, depth 400 mm.2" drain valve. Made of AISI 304 stainless steel, adjustable stainless steel feet.Deep-drawn" tank made of AISI 304 stainless steel, equipped with a removable strainer. Water tap for filling the tank.Deep-drawn" cover, hinges with "torsion spring" allowing gradual closing and opening.Indirect heating, double jacketed tank, water filling through a tap, a second one acting as an overflow, allows to check the completion of the filling. Pressure control of the...
%
Tank diameter 600, depth 400 mm.2" drain valve. Made of AISI 304 stainless steel, adjustable stainless steel feet.Deep-drawn" tank made of AISI 304 stainless steel, equipped with a removable strainer. Water tap for filling the tank.Deep-drawn" cover, hinges with "torsion spring" allowing gradual closing and opening.Indirect heating, double jacketed tank, water filling through a tap, a second one acting as an overflow, allows to check the completion of the filling. Pressure control of the...
%
Tank diameter 600, depth 530 mm.2" drain valve. Made of AISI 304 stainless steel, adjustable stainless steel feet.Deep-drawn" tank made of AISI 304 stainless steel, equipped with a removable strainer. Water tap for filling the tank.Deep-drawn" cover, hinges with "torsion spring" allowing gradual closing and opening.Indirect heating, double jacketed tank, water filling through a tap, a second one acting as an overflow, allows to check the completion of the filling. Pressure control of the...
%
Tank diameter 600, depth 530 mm.2" drain valve. Made of AISI 304 stainless steel, adjustable stainless steel feet.Deep-drawn" tank made of AISI 304 stainless steel, equipped with a removable strainer. Water tap for filling the tank.Deep-drawn" cover, hinges with "torsion spring" allowing gradual closing and opening.Indirect heating, double jacketed tank, water filling through a tap, a second one acting as an overflow, allows to check the completion of the filling. Pressure control of the...
%
Tank diameter 400 mm, depth 420 mm.Drain tap 6/4". Made of stainless steel AISI 304, adjustable feet in stainless steel.Pressed and sealed top (15/10 mm) in stainless steel AISI 304.Rear chimney in stainless steel AISI 304.Deep-drawn tank made of AISI 304 stainless steel, bottom in AISI 316 stainless steel (bottom of the tank 30/10 mm thick, side walls 20/10 mm thick), resistant to salt corrosion and wear, equipped with removable strainer for protection of the drain valve, corners with...
%
Diameter of the tank 600 mm, depth 420 mm.Drainage tap 2".Made in stainless steel AISI 304, adjustable feet in stainless steel.Stamped and waterproof top (20/10 mm) in stainless steel AISI 304.Chimney in the back in stainless steel AISI 304."Stamped" tank in stainless steel AISI 304, bottom in stainless steel AISI 316 30/10 mm, side walls in 20/10 mm, resistant to salt corrosion and wear, provided with a removable strainer for protection of the drain valve, corners with rounded interior...
%
Diameter of the tank 600 mm, deep 540 mm.Drainage tap 2".Made in stainless steel AISI 304, adjustable feet in stainless steel.Stamped and waterproof top (20/10 mm) in stainless steel AISI 304.Chimney in the back in stainless steel AISI 304."Stamped" tank in stainless steel AISI 304, bottom in stainless steel AISI 316 30/10 mm, side walls in 20/10 mm, resistant to salt corrosion and wear, provided with a removable strainer for protection of the drain valve, corners with rounded interior...
%
- Diameter of the basin 420, depth 485 mm.- Outlet tap of 1,1/2".- Made of AISI 304 stainless steel, "deep drawn" top (15/10th), adjustable stainless steel feet (150/200 mm), waterproof "IPX5". - Deep-drawn" tank made of AISI 316 stainless steel, bottom 30/10 mm thick, side walls 20/10 mm thick, resistant to salt corrosion and wear, equipped with a removable strainer to protect the drain valve. Water tap for filling the tank. - Deep-drawn" cover, made of AISI 316 stainless steel with double...
%
Diameter of the basin 420, depth 485 mm.Outlet tap of 1,1/2". Made of AISI 304 stainless steel, "deep-drawn" top (15/10 mm), adjustable stainless steel feet (150/200 mm), waterproof "IPX5".Deep-drawn" tank made of AISI 316 stainless steel, bottom 30/10 mm thick, side walls 20/10 mm thick, resistant to salt corrosion and wear, equipped with a removable strainer to protect the drain valve. Water tap for filling the tank.Deep-drawn" cover, made of AISI 316 stainless steel with double walls...
%
Tank diameter 600, depth 400 mm.2" drain valve. Made of AISI 304 stainless steel, adjustable stainless steel feet.Deep-drawn" tank made of AISI 304 stainless steel, equipped with a removable strainer. Water tap for filling the tank.Deep-drawn" cover, hinges with "torsion spring" allowing gradual closing and opening.Gas heating, by stainless steel burners with stabilized flame, regulation by valve.Appliances built in compliance with current standards (CE)
%
Diamètre cuve 600, profondeur 530 mm.Robinet de vidange de 2".Réalisation en acier inox AISI 304, pieds réglables en inox.Cuve "emboutie" réalisée en acier inox AISI 304, munie d'une crépine amovible. Robinet d'eau permettant le remplissage de la cuve.Couvercle "embouti", charnières avec "ressort à torsion" permettant une fermeture et une ouverture graduelles.Chauffage gaz, par des brûleurs en acier inox à flamme stabilisée, régulation par vanne.Appareils construits dans le respect de...
%
Diamètre cuve 600, profondeur 530 mm.Robinet de vidange de 2".Réalisation en acier inox AISI 304, pieds réglables en inox.Cuve "emboutie" réalisée en acier inox AISI 304, munie d'une crépine amovible. Robinet d'eau permettant le remplissage de la cuve.Couvercle "embouti", charnières avec "ressort à torsion" permettant une fermeture et une ouverture graduelles.Chauffage indirect, cuve à double enveloppe, remplissage d'eau par un robinet, un deuxième faisant office de trop-plein, permet de...
%
Tank diameter 400 mm, depth 420 mm.6/4" drain valve.Made of AISI 304 stainless steel, adjustable stainless steel feet.Deep-drawn and waterproof top (15/10 mm) in AISI 304 stainless steel.Rear chimney in AISI 304 stainless steel.Deep-drawn" tank made of AISI 304 stainless steel, bottom made of AISI 316 stainless steel (bottom of the tank 30/10 mm thick, side walls 20/10 mm thick), resistant to salt corrosion and wear, equipped with a removable strainer to protect the drain valve, rounded inner...
%
Diameter of the tank 600 mm, depth 420 mm.2" drain tap.Made in stainless steel AISI 304, adjustable feet in stainless steel.Stamped and waterproof top (20/10 mm) in stainless steel AISI 304.Chimney in the back in stainless steel AISI 304."Stamped" tank in stainless steel AISI 304, bottom in stainless steel AISI 316 (30/10 mm, side walls 20/10 mm), resistant to salt corrosion and usury, provided with a removable strainer for protection of the drain valve, corners with rounded interior angles....