%
Included: 3 grids GN 2/1 (530x650 mm).4 adjustable stainless steel feet.Refrigerant gas R290.Interior and exterior made of stainless steel (food grade) AISI 304 (rear galvanized steel), monocoque frameStainless steel racks and slides (antitilt), allowing the grids to be positioned as desired, deep-drawn inner bottom and rounded corners and angles (without rough edges)Doors with ergonomic (not protruding) and reversible handle, closing by "triple chamber" and magnetic seal (easy replacement,...
%
Included: 3 grids GN 2/1 (530x650 mm) by door.4 adjustable stainless steel feet.Refrigerant gas R290.Interior and exterior made of stainless steel (food grade) AISI 304 (rear galvanized steel), monocoque frameStainless steel racks and slides (antitilt), allowing the grids to be positioned as desired, deep-drawn inner bottom and rounded corners and angles (without rough edges)Doors with ergonomic (not protruding) and reversible handle, closing by "triple chamber" and magnetic seal (easy...
%
Included: 10 trays GN 1/1-h100 mm in polycarbonate.Evaporator at copper coil (lateral), hidden by a perforated stainless steel deflector.Manual defrosting, with water collecting tray.Bottom fitted with draining tap.4 adjustable stainless steel feet.Refrigerant gas R290. Interior and exterior made of stainless steel (food grade) AISI 304 (rear galvanized steel), monocoque frameStainless steel racks and slides (antitilt), allowing the grids to be positioned as desired, deep-drawn inner bottom...
%
Included: 20 pairs of slides (600x800 mm) by door.4 adjustable stainless steel feet.Cooling gas R290.Manufactured in stainless steel, inside and outside in AISI 304 (back in galvanized steel), monocoque frame.Stainless steel rack and slides (anti-tilting), allowing to place the grids as one pleases, stamped interior bottom, rounded angles and corners (without roughness).Doors with ergonomic handle (no salient) and reversible, closed by magnetic seal with "3 compartments" (easy replacement...
%
Included: 20 pairs of slides (400x600 mm) by door.4 adjustable stainless steel feet.Cooling gas R290.Manufactured in stainless steel AISI 304, inside and outside (back in galvanized steel), monocoque frame.Stainless steel racks and slides (anti-tilting), allowing to place the plates as one pleases, stamped interior bottom, rounded angles and corners (without roughness).Doors with ergonomic handle (no salient) and reversible, closed by magnetic seal with "3 compartments" (easy replacement...
%
Included: 20 pairs of slides (600x800 mm) by door.4 adjustable stainless steel feet.Cooling gas R290.Manufactured in stainless steel AISI 304, inside and outside (back in galvanized steel), monocoque frame.Stainless steel racks and slides (anti-tilting), allowing to place the plates as one pleases, stamped interior bottom, rounded angles and corners (without roughness).Doors with ergonomic handle (no salient) and reversible, closed by magnetic seal with "3 compartments" (easy replacement...
%
- Manufactured in stainless steel AISI 441. - 3 drawers for the plates 600x400.PLUS: Modulate you piece of furniture according to your needs, each module is 500-mm wide, except the cupboards with sliding doors, which are 1000, 1500 and 2000 mm. Possible to put a 800-mm deep top, on request.
%
%
- Manufactured in stainless steel AISI 441.- 2 sliding doors, isolated double walls, adjustable intermediate shelf.PLUS: Modulate you piece of furniture according to your needs, each module is 500-mm wide, except the cupboards with sliding doors, which are 1000, 1500 and 2000 mm. Possible to put a 800-mm deep top, on request.
%
- Manufactured in stainless steel AISI 441. - 2 sliding doors, isolated double walls, adjustable intermediate shelf.PLUS: Modulate you piece of furniture according to your needs, each module is 500-mm wide, except the cupboards with sliding doors, which are 1000, 1500 and 2000 mm. Possible to put a 800-mm deep top, on request.
%
- Manufactured in stainless steel AISI 441. - 2 sliding doors, isolated double walls, adjustable intermediate shelf.PLUS: Modulate you piece of furniture according to your needs, each module is 500-mm wide, except the cupboards with sliding doors, which are 1000, 1500 and 2000 mm. Possible to put a 800-mm deep top, on request.
%
- Vervaardigd uit RVS. AISI 441- Structuur voor Dienbladen 600x400, 6niveaus
%
- Manufactured in stainless steel AISI 441. - 2 sliding doors, isolated double walls, adjustable intermediate shelf.PLUS: Modulate you piece of furniture according to your needs, each module is 500-mm wide, except the cupboards with sliding doors, which are 1000, 1500 and 2000 mm. Possible to put a 800-mm deep top, on request.
%
%
- Manufactured in stainless steel AISI 441. - Thickness 15/10, reinforced with a stainless steel sheet on the bottom.PLUS: Modulate you piece of furniture according to your needs, each module is 500-mm wide, except the cupboards with sliding doors, which are 1000, 1500 and 2000 mm. Possible to put a 800-mm deep top, on request.
%
- Manufactured in stainless steel AISI 441. - Thickness 15/10, reinforced with a stainless steel sheet on the bottom.PLUS: Modulate you piece of furniture according to your needs, each module is 500-mm wide, except the cupboards with sliding doors, which are 1000, 1500 and 2000 mm. Possible to put a 800-mm deep top, on request.
%
- Manufactured in stainless steel AISI 441. - Thickness 15/10, reinforced with a stainless steel sheet on the bottom.PLUS: Modulate you piece of furniture according to your needs, each module is 500-mm wide, except the cupboards with sliding doors, which are 1000, 1500 and 2000 mm. Possible to put a 800-mm deep top, on request.
%
- Manufactured in stainless steel AISI 441. - Capacity 125 liters, lids + wheels.PLUS: Modulate you piece of furniture according to your needs, each module is 500-mm wide, except the cupboards with sliding doors, which are 1000, 1500 and 2000 mm. Possible to put a 800-mm deep top, on request.
%
Dimensions of the basin 306x510xh156 mm. Made of AISI 304 stainless steel, deep-drawn "top" (15/10 mm), levelling cylinders.Deep-drawn tank in AISI 316 stainless steel with rounded corners and double perforated bottom for draining food. GN capacity 1/1 h150 mm.Electric heating, vault with ceramic resistance placed above the appliance. ON/OFF switch with indicator light.Appliances built in compliance with current standards (CE).
%
Included: 6 grids (560x542 mm) and 3 small connecting grids (154x500 mm).4 adjustable stainless steel feet. Monoblock structure, inside and outside manufactured in stainless steel (food), the back is in galvanized steel.Stamped inside bottom with draining cap (high maintenance), rounded angles and corners (without bumps), racks and slides (anti-swinging) in stainless steel.Reversible doors (provided for key lock) (lock in option), with built-in handles (not salient), magnetic joint (easy...
%
Included: 3 grids (560x542 mm).4 adjustable stainless steel feet. Monoblock structure, inside and outside manufactured in stainless steel (food), the back is in galvanized steel.Stamped inside bottom with draining cap (high maintenance), rounded angles and corners (without bumps), racks and slides (anti-swinging) in stainless steel.Reversible doors (provided for key lock) (lock in option), with built-in handles (not salient), magnetic joint (easy replacement, without tools), hinge with...
%
Tank dimensions 306x510xh175 mm. Construction in stainless steel AISI 304, "top" pressed (20/10 mm), leveling feet, water tightness "IPX5."Pressed tank in stainless steel AISI 316 (Food certified according to European regulation CE n.1935/2004) with rounded corners and perforated double bottom. GN 1/1 h150 mm capacity.Electric heating with ceramic resistance placed above the device. ON/OFF switch.Appliances built in compliance with current (CE) regulations.
%
- Useful tank dimensions 265x325xh150 mm.- Made of AISI 304 stainless steel. - AISI 304 18/10 stainless steel bowl with perforated bottom for draining food. - A vault with a ceramic resistor is placed above the appliance. ON/OFF switch. - The appliance is built in compliance with all current EC regulations.
%
Energy class: D (very important, cabinets "HEAVY DUTY" certified climate class 5 "40 ° C Temperature - 40% humidity.Oversized, ventilated evaporator.Included: 3 grids GN 2/1 (530x650 mm) per door, 3 central grids (between grids).Refrigerant R290.Delivered with 6 wheels, 2 with brake.Manufactured in stainless steel, interior AISI 304, exterior AISI 441 (back in treated steel, gray), monocoque frame.Stainless steel rack and slides (anti-tilting), allowing to place the grids as ones...