%
Cast iron mould, ensures a homogeneous baking, ("Liège" is suitable for baking fresh or frozen waffles (type Mc Cain or Avieta).Heating by armoured resistors in stainless steel treated "Incoloy".Regulation from 0 to 300°C.All stainless steel handle (very robust).Removable peripheral trunking, facilitating maintenance (exclusive patent).Switch-commutator and indicator light(s).Made of stainless steel, adjustable feet.Appliances built in compliance with the standards (CE) in force.
%
"Wall" model with back board.2 ventilated evaporators.Included: 1 grid GN 1/1 (530x325 mm), by door.6 adjustable stainless steel feet.Monocoque designManufactured in stainless steel, inside AISI 304, outside AISI 441.Independent upper top (dismountable), stainless steel AISI 304.Stainless steel rack and slides (anti-tilting), allowing to place the grids as one pleases.Stamped interior bottom, rounded angles and corners (without roughness).Doors with ergonomic handle (no salient) and...
%
Wall-mounted" version with raised rear edge.Included: 4 GN grids (325x535 mm), with guides.6 adjustable stainless steel feet. Monobloc structure, made inside and outside (including the rear) of austenitic stainless steel (food-grade), top (40 mm).Interior bottom is embossed, with a large maintenance drain plug, rounded corners (without roughness), stainless steel grids and guides (anti-tilting).Doors with recessed handles (non-protruding), magnetic seal (easy replacement without tools),...
%
Delivered with "toughened" glass on top.Delivered with standard slides 4x 1/4 and 1x 1/8.NB: delivered without pans GN.. Manufactured in stainless steel austenitic.- Electronic thermostat in closed box, waterproof.. Evaporator tubes integrated in the walls and bottom, polyurethane insulation, without CFC's.. Refrigerant R600a.. Compressor group in climate class 4 (at right side).. Ventilated condensor, with anti-fat filter protection.. Manufactured following the (CE) standards in force
%
Delivered with sneeze guard in tempered glass.Delivered slides standard 6x 1/4 and 1x 1/8.NB: delivered without pans GN.. Manufactured in stainless steel austenitic.- Electronic thermostat in closed box, waterproof.. Evaporator tubes integrated in the walls and bottom, polyurethane insulation, without CFC's.. Refrigerant R600a.. Compressor group in climate class 4 (at right side).. Ventilated condensor, with anti-fat filter protection.. Manufactured following the (CE) standards in force
%
Capacity: 6x GN1/4, 1x GN1/9 h150 mmSupport strip trays GN 1/9 standard delivered.NB: delivered without GN trays. Inside and outside manufactured in stainless steel AISI 441.Frontal, upper and lateral "toughened" glass protection , thickness 10 mm.Refrigeration unit in climate class 4, built-in the (right) board, ventilated condessor.Evaporator at copper coil, embedded in the walls.Expanded polyurethane insulation (without CFC).Refrigerant R290.Automatic defrosting, number of defrosting...
%
Capacity: : GN 9x GN1/4 h150 mmNB: delivered without GN trays. Inside and outside manufactured in stainless steel AISI 441.Frontal, upper and lateral "toughened" glass protection , thickness 10 mm.Compressor unit in climate class 4 , built-in the (right) board, ventilated condessor.Evaporator at copper coil, embedded in the walls.Expanded polyurethane insulation (without CFC).Refrigerant R290.Automatic defrosting, number of defrosting programmed by the factory (modifiable at will).Electronic...
%
Delivered with sneeze guard in tempered glass.Delivered slides standard 9x 1/4 and 1x 1/8.NB: delivered without pans GN.. Manufactured in stainless steel austenitic.- Electronic thermostat in closed box, waterproof.. Evaporator tubes integrated in the walls and bottom, polyurethane insulation, without CFC's.. Refrigerant R600a.. Compressor group in climate class 4 (at right side).. Ventilated condensor, with anti-fat filter protection.. Manufactured following the (CE) standards in force
%
Capacity: GN 12x 1/4, 1x 1/9 h150 mm.Support strip trays GN 1/9 standard delivered.NB: delivered without GN trays. Inside and outside manufactured in stainless steel AISI 441.Frontal, upper and lateral "toughened" glass protection , thickness 10 mm.Compressor unit in climate class 4 , built-in the (right) board, ventilated condessor.Evaporator at copper coil, embedded in the walls.Expanded polyurethane insulation (without CFC).Refrigerant R290.Automatic defrosting, number of defrosting...
%
Delivered with sneeze guard in tempered glass.Delivered slides standard 3x 1/3 and 4x 1/6 or 1/9.NB: delivered without pans GN.Manufactured in stainless steel austentic (alimentary).Electronic thermostat in closed moisture proof housing.Evaporator tubes integrated in the walls and bottom, polyurethane insulation, without CFC's.Refrigerant R600a.Compressor group fit in climatic class (mounted in the rights side).Ventilated condensor, with filter protection against fat.Produced in accordance...
%
Delivered with sneeze guard in tempered glass.Delivered slides standard 6x 1/3 and 4x 1/6 or 1/9.NB: delivered without pans GN.Manufactured in stainless steel austentic (alimentary).Electronic thermostat in closed moisture proof housing.Evaporator tubes integrated in the walls and bottom, polyurethane insulation, without CFC's.Refrigerant R600a.Compressor group fit in climatic class (mounted in the rights side).Ventilated condensor, with filter protection against fat.Produced in accordance...
%
Capacity: GN 6x 1/3 h150 mmNB: delivered without GN trays. Inside and outside manufactured in stainless steel AISI 441.Frontal, upper and lateral "toughened" glass protection , thickness 10 mm.Compressor unit in climate class 4, built-in the (right) board, ventilated condessor.Evaporator at copper coil, embedded in the walls.Expanded polyurethane insulation (without CFC).Refrigerant R290.Automatic defrosting, number of defrosting programmed by the factory (modifiable at will).Electronic...
%
Capacity: GN 8x 1/3, 1x 1/9 h150 mmSupport strip trays GN 1/9 standard delivered .NB: delivered without GN trays. Inside and outside manufactured in stainless steel AISI 441.Frontal, upper and lateral "toughened" glass protection , thickness 10 mm.Compressor unit in climate class 4 , built-in the (right) board, ventilated condessor.Evaporator at copper coil, embedded in the walls.Expanded polyurethane insulation (without CFC).Refrigerant R290.Automatic defrosting, number of defrosting...
%
Delivered with sneeze guard in tempered glass.Delivered slides standard 9x 1/3 and 4x 1/6 or 1/9.NB: delivered without pans GN.Manufactured in stainless steel austentic (alimentary).Electronic thermostat in closed moisture proof housing.Evaporator tubes integrated in the walls and bottom, polyurethane insulation, without CFC's.Refrigerant R600a.Compressor group fit in climatic class (mounted in the rights side).Ventilated condensor, with filter protection against fat.Produced in accordance...
%
%
Capacity: GN 11x 1/3, 1x 1/9 h150 mmSupport strip trays GN 1/9 standard delivered.NB: delivered without GN trays. Inside and outside manufactured in stainless steel AISI 441.Frontal, upper and lateral "toughened" glass protection , thickness 10 mm.Compressor unit in climate class 4, built-in the (right) board, ventilated condessor.Evaporator at copper coil, embedded in the walls.Expanded polyurethane insulation (without CFC).Refrigerant R290.Automatic defrosting, number of defrosting...
%
Wall-mounted version with raised rear edge.Included: 1 grid GN1/1 (530x325mm), per door.6 adjustable stainless steel feet.Can be installed on a base.Interior and exterior made of AISI 304 stainless steel (food grade), monocoque frameIndependent top (removable), in stainless steel (food grade) AISI 304Stainless steel racks and slides (antitilt), allowing the grids to be positioned as desired, deep-drawn inner bottom and rounded corners and angles (without rough edges)Doors with ergonomic (not...
%
Sink 300x330xh200 mm built into the top (on the right), equipped with a trap, strainer, and overflow drain (NB faucet on request, hole on the top (33 mm)"Wall-mounted" version with raised back edgeIncluded: 1 GN1/1 grid (530x325mm), per door6 adjustable stainless steel legs.Installation possible on a base. Interior and exterior made of food-grade AISI 304 stainless steel, monocoque chassisIndependent (removable) top made of food-grade AISI 304 stainless steelStainless steel (anti-tilt) racks...
%
Refrigeration unit positioned on the left.Wall-mounted version with raised rear edge.Included: 1 grid GN1/1 (530x325mm), per door.6 adjustable stainless steel feet.Can be installed on a base.Interior and exterior made of AISI 304 stainless steel (food grade), monocoque frameIndependent top (removable), in stainless steel (food grade) AISI 304Stainless steel racks and slides (antitilt), allowing the grids to be positioned as desired, deep-drawn inner bottom and rounded corners and angles...
%
Wall" version with raised rear edge 100-150 mm "straight".Top with 50 mm edge (15/10th)Included: 4 pairs of slides for 600x400 mm plates, per door6 adjustable stainless steel feet.Can be installed on a base.Interior and exterior made of AISI 304 stainless steel (food grade), monocoque frameIndependent top top (removable), in stainless steel (food grade) AISI 304Stainless steel racks and slides (maximum capacity 8 slides, spacing 68 mm), allowing the plates to be positioned as desired,...
%
Sink 340x400x200mm integrated in the work top (right side), delivered with a siphon; drain screen and overflow (NB: tap on request, opening on the work top (27 mm))."Wall" model with turned-up back edge.2 ventilated evaporators.Included: 1 grid GN 1/1 (530x325 mm), per door.6 adjustable stainless steel feet.Monocoque designManufactured in stainless steel, inside AISI 304, outside AISI 441.Independent upper top (dismountable), stainless steel AISI 304.Stainless steel rack and slides...
%
Refrigeration unit on the left side."Wall" model with back board.2 ventilated evaporators.Included: 1 grid GN 1/1 (530x325 mm), by door.6 adjustable stainless steel feet.Monocoque designManufactured in stainless steel, inside AISI 304, outside AISI 441.Independent upper top (dismountable), stainless steel AISI 304.Stainless steel rack and slides (anti-tilting), allowing to place the grids as one pleases.Stamped interior bottom, rounded angles and corners (without roughness).Doors with...
%