%
Compact, but with a large cutting capacity, realized in anodized and polished aluminum alloy.Sanitary polished and anodized aluminium alloy, hardened, chromed stainless blade, permanent tapered blade ring guard and interlocked blade guard (100% safe).Reinforced gauge plate, max. cutting capacity 250xh185 (Ø 210 mm) slice thickness 0-13 mm.Carriage sliding on stainless bearings for an easy and quiet operation, a plexiglass hand guard comes standard.Stainless steel screws and...
%
Compact machine but with an important cutting capacity.Hardened, chrome-plated and ground steel blade (Ø 300 mm), fixed protection ring and blade cover with microswitch (100% safety).Sliding of the carriage on self-lubricating bushings and ground pins.Stainless steel screws.Built-in aluminium sharpener with 2 emery wheels. On/off switch, protection class IP 44.Ventilated motor, lower protection, with direct access to the electrical elements, sealing ring on the transmission pulley,...
%
Gravity feed, 38° inclination.Max. cutting capacity 230xh175 (Ø 200 mm), slice thickness 0-30 mm.41 mm gap between blade and body. Stylish and performing, sanitary polished and anodized aluminium alloy, hardened, chromed stainless blade, permanent tapered blade ring guard and interlocked blade guard (100% safe).Reinforced gauge plate, removable slider guard.Carriage sliding on stainless bearings for an easy and quiet operation, polished, chromed and hardened sliding bar, vulcanized rubber...
%
Version with vertical blade.Double-feed carriage with a clamping arm holding firmly in place all cold meats.Cutting capacity 275 mm, plate 275xh260 mm.Cutting thickness 0-30 mm. Rounded design, no corners and sharp edges and no visible screws.Blade (Ø 300 mm) made of hardened steel, chrome and improved, tapered blade ring guard and interlocked blade guard (100% safe).Ashes of the cutting carriage in chrome, improved and polished.Carriage sliding on stainless bearings for an easy and quiet...
%
Made of "anodized aluminum", food treated.Blade in stainless steel AISI 304.Sliding carriage with transparent Plexiglas protection.Cutting capacity : 200x260 mm.Sharpening device, delivered separately, with adapter.Cutting adjustment from 0-15 mm.Easily removable blade guard.No volt release" device that prevents the machine from starting during the cleaning phase.Low voltage control 24 V, protection class IP65.Safety microswitch on the blade.Blade cover ring (100% protection).The machine is...
%
Traction de la lame par volant manuelle, nécessitant aucune allimentation électrique.Lame en acier trempé, aiguisage automatique incorporé.Protège lame incorporé (norme CEE).Capacité de coupe 230x190 mm, réglage de coupe de 0-8 mm, course du chariot 230 mm, assiette 240x275 mm.Réalisée fonte (rouge vif) et aluminium anodisé.
%
%
Réalisée en "aluminium anodisé", traité alimentaire.Lame en acier trempé, chromé. Chariot coulissant , aisément amovible, muni d'une protection en plexiglas transparent.Capacité de coupe : 200x260 mm.Aiguisage automatique incorporé.Réglage de coupe de 0-15 mm.Protège lame aisément démontable.Dispositif "no volt release" qui empêche le démarrage de la machine en phase de nettoyage.Commande à basse tension 24 V, indice de protection IP65.Micro-interrupteur de sécurité sur la lame.Anneau couvre...
%
Version: with automatic oil filtering, automatic basket lifting and AUTO COOK.Made of AISI 304 stainless steel, deep-drawn "top" (20/10 mm) with overflow area, adjustable stainless steel feet (150/200mm), waterproof "IPX5".Tank dimensions 340x400xh575 mm.Quantity of oil in use, min. 21 lit. max. 23 lit.2 chrome steel baskets, dimensions 140x320xh150 mm.Y-shaped deep-drawn tank with rounded corners, equipped with a cold zone. Made of AISI 304 stainless steel. Drain tap (ball valve) and tank...
%
Delivered with "toughened" glass on top.Delivered with standard slides 4x 1/4 and 1x 1/8.NB: delivered without pans GN.. Manufactured in stainless steel austenitic.- Electronic thermostat in closed box, waterproof.. Evaporator tubes integrated in the walls and bottom, polyurethane insulation, without CFC's.. Refrigerant R600a.. Compressor group in climate class 4 (at right side).. Ventilated condensor, with anti-fat filter protection.. Manufactured following the (CE) standards in force
%
Delivered with sneeze guard in tempered glass.Delivered slides standard 6x 1/4 and 1x 1/8.NB: delivered without pans GN.. Manufactured in stainless steel austenitic.- Electronic thermostat in closed box, waterproof.. Evaporator tubes integrated in the walls and bottom, polyurethane insulation, without CFC's.. Refrigerant R600a.. Compressor group in climate class 4 (at right side).. Ventilated condensor, with anti-fat filter protection.. Manufactured following the (CE) standards in force
%
Capacity: 6x GN1/4, 1x GN1/9 h150 mmNB: delivered without GN trays. Inside and outside manufactured in stainless steel AISI 441.Frontal, upper and lateral "toughened" glass protection , thickness 10 mm.Refrigeration unit in climate class 4, built-in the (right) board, ventilated condessor.Evaporator at copper coil, embedded in the walls.Expanded polyurethane insulation (without CFC).Refrigerant R290.Automatic defrosting, number of defrosting programmed by the factory (modifiable at...
%
Capacity: : GN 9x GN1/4 h150 mmNB: delivered without GN trays. Inside and outside manufactured in stainless steel AISI 441.Frontal, upper and lateral "toughened" glass protection , thickness 10 mm.Compressor unit in climate class 4 , built-in the (right) board, ventilated condessor.Evaporator at copper coil, embedded in the walls.Expanded polyurethane insulation (without CFC).Refrigerant R290.Automatic defrosting, number of defrosting programmed by the factory (modifiable at will).Electronic...
%
Delivered with sneeze guard in tempered glass.Delivered slides standard 9x 1/4 and 1x 1/8.NB: delivered without pans GN.. Manufactured in stainless steel austenitic.- Electronic thermostat in closed box, waterproof.. Evaporator tubes integrated in the walls and bottom, polyurethane insulation, without CFC's.. Refrigerant R600a.. Compressor group in climate class 4 (at right side).. Ventilated condensor, with anti-fat filter protection.. Manufactured following the (CE) standards in force
%
Capacity: GN 12x 1/4, 1x 1/9 h150 mmNB: delivered without GN trays. Inside and outside manufactured in stainless steel AISI 441.Frontal, upper and lateral "toughened" glass protection , thickness 10 mm.Compressor unit in climate class 4 , built-in the (right) board, ventilated condessor.Evaporator at copper coil, embedded in the walls.Expanded polyurethane insulation (without CFC).Refrigerant R290.Automatic defrosting, number of defrosting programmed by the factory (modifiable at...
%
Delivered with sneeze guard in tempered glass.Delivered slides standard 3x 1/3 and 4x 1/6 or 1/9.NB: delivered without pans GN.Manufactured in stainless steel austentic (alimentary).Electronic thermostat in closed moisture proof housing.Evaporator tubes integrated in the walls and bottom, polyurethane insulation, without CFC's.Refrigerant R600a.Compressor group fit in climatic class (mounted in the rights side).Ventilated condensor, with filter protection against fat.Produced in accordance...
%
Delivered with sneeze guard in tempered glass.Delivered slides standard 6x 1/3 and 4x 1/6 or 1/9.NB: delivered without pans GN.Manufactured in stainless steel austentic (alimentary).Electronic thermostat in closed moisture proof housing.Evaporator tubes integrated in the walls and bottom, polyurethane insulation, without CFC's.Refrigerant R600a.Compressor group fit in climatic class (mounted in the rights side).Ventilated condensor, with filter protection against fat.Produced in accordance...
%
Capacity: GN 6x 1/3 h150 mmNB: delivered without GN trays. Inside and outside manufactured in stainless steel AISI 441.Frontal, upper and lateral "toughened" glass protection , thickness 10 mm.Compressor unit in climate class 4, built-in the (right) board, ventilated condessor.Evaporator at copper coil, embedded in the walls.Expanded polyurethane insulation (without CFC).Refrigerant R290.Automatic defrosting, number of defrosting programmed by the factory (modifiable at will).Electronic...
%
Capacity: GN 8x 1/3, 1x 1/9 h150 mmNB: delivered without GN trays. Inside and outside manufactured in stainless steel AISI 441.Frontal, upper and lateral "toughened" glass protection , thickness 10 mm.Compressor unit in climate class 4 , built-in the (right) board, ventilated condessor.Evaporator at copper coil, embedded in the walls.Expanded polyurethane insulation (without CFC).Refrigerant R290.Automatic defrosting, number of defrosting programmed by the factory (modifiable at...
%
Delivered with sneeze guard in tempered glass.Delivered slides standard 9x 1/3 and 4x 1/6 or 1/9.NB: delivered without pans GN.Manufactured in stainless steel austentic (alimentary).Electronic thermostat in closed moisture proof housing.Evaporator tubes integrated in the walls and bottom, polyurethane insulation, without CFC's.Refrigerant R600a.Compressor group fit in climatic class (mounted in the rights side).Ventilated condensor, with filter protection against fat.Produced in accordance...
%
%
Capacity: GN 11x 1/3, 1x 1/9 h150 mmNB: delivered without GN trays. Inside and outside manufactured in stainless steel AISI 441.Frontal, upper and lateral "toughened" glass protection , thickness 10 mm.Compressor unit in climate class 4, built-in the (right) board, ventilated condessor.Evaporator at copper coil, embedded in the walls.Expanded polyurethane insulation (without CFC).Refrigerant R290.Automatic defrosting, number of defrosting programmed by the factory (modifiable at...
%