%
Blade length 1650 mm.Height cap. 250 mm.AISI 304 stainless steel waterproof construction.Equipped with meat pusher and portion device.Interlocked waste tray is removable from outside.Removable door and upper pulley for easier cleaning.Aluminum pulleys with sealed ball bearings.Single-phase motors comes with standard thermal protection.Easy unlocking of the upper pulley allows for easier cleaning and blade replacement.Removable PVC scrapers.IP 54 24 V on/off switch with safety microswitch.The...
%
- Tank 306x510xh110 mm, superficie 15,8 dm2- Deep-drawn top thickness 15/10th - Stainless steel tank AISI 316 "COMPOUND", with high thermal conductivity - Plug and extension for discharge, supplied as standard - Electrical heating: Stainless steel armoured resistors, positioned under the tank, regulation from 120°C to 300°. - Safety device in case of overheating - Water protection degree IPX5 - Made of AISI 304 stainless steel, adjustable stainless steel feet - Appliances built in compliance...
%
Tank 306x510xh110 mm, superficie 15,8 dm2Deep-drawn top thickness 15/10thStainless steel tank AISI 316 "COMPOUND", with high thermal conductivityPlug and extension for discharge, supplied as standardElectrical heating: Stainless steel armoured resistors, positioned under the tank, regulation from 120°C to 300°.Safety device in case of overheatingWater protection degree IPX5Made of AISI 304 stainless steel, adjustable stainless steel feetAppliances built in compliance with current standards (CE)
%
Tank dimensions 630x510xh110 mm, surface 32,1 dm2. Deep-drawn top thickness 15/10thStainless steel tank AISI 316 "COMPOUND", with high thermal conductivityPlug and extension for discharge, supplied as standardElectrical heating: Stainless steel armoured resistors, positioned under the tank, regulation from 120°C to 300°.Safety device in case of overheatingWater protection degree IPX5Made of AISI 304 stainless steel, adjustable stainless steel feetAppliances built in compliance with current...
%
Tank dimensions 630x510xh110 mm, surface 32,1 dm2. Deep-drawn top thickness 15/10thStainless steel tank AISI 316 "COMPOUND", with high thermal conductivityPlug and extension for discharge, supplied as standardElectrical heating: Stainless steel armoured resistors, positioned under the tank, regulation from 120°C to 300°.Safety device in case of overheatingWater protection degree IPX5Made of AISI 304 stainless steel, adjustable stainless steel feetAppliances built in compliance with current...
%
Tank dimensions 630x510xh110 mm, surface area 32.1 dm2. Made of AISI 304 stainless steel, deep-drawn "top" (20/10 mm), adjustable stainless steel feet (150-200 mm), waterproof IPX5Tank in AISI 316 "COMPOUND" stainless steel, with high thermal conductivity.Plug and extension for discharge, supplied as standard.Electric heating: stainless steel armoured resistors, positioned under the tank, regulation from 120 to 300°C.Safety device in case of overheating.Appliances built in compliance with...
%
Tank dimensions 630x510xh110 mm, surface area 32.1 dm2. Made of AISI 304 stainless steel, deep-drawn "top" (20/10 mm), adjustable stainless steel feet (150-200 mm), waterproof IPX5Tank in AISI 316 "COMPOUND" stainless steel, with high thermal conductivity.Plug and extension for discharge, supplied as standard.Electric heating: stainless steel armoured resistors, positioned under the tank, regulation from 120 to 300°C.Safety device in case of overheating.Appliances built in compliance with...
%
Tank dimensions 306x510xh110 mm, surface 15,8 dm2.Deep-drawn top thickness 15/10thStainless steel tank AISI 316 "COMPOUND", with high thermal conductivityPlug and extension for discharge, supplied as standardGas heating: stainless steel burners with stabilized flame, regulation 100 to 250°C, piezoelectric ignitionSafety device in case of overheatingWater protection degree IPX5Made of AISI 304 stainless steel, adjustable stainless steel feetAppliances built in compliance with current standards...
%
Tank dimensions 630x510xh110 mm, surface 32,1 dm2.Deep-drawn top thickness 15/10thStainless steel tank AISI 316 "COMPOUND", with high thermal conductivityPlug and extension for discharge, supplied as standardGas heating: stainless steel burners with stabilized flame, regulation 100 to 250°C, piezoelectric ignitionSafety device in case of overheatingWater protection degree IPX5Made of AISI 304 stainless steel, adjustable stainless steel feetAppliances built in compliance with current standards...
%
Tank dimensions 630x510xh110 mm, surface area 32.1 dm2.Made of AISI 304 stainless steel, deep-drawn "top" (20/10 mm), adjustable stainless steel feet (150-200 mm), waterproof IPX5Tank in AISI 316 "COMPOUND" stainless steel, with high thermal conductivity.Plug and extension for discharge, supplied as standard.Gas heating: stainless steel burners with stabilized flame, regulation 100 to 250°C, piezoelectric ignition.Safety device in case of overheating.Appliances built in compliance with...
%
Delivered with stainless steel lidDelivered with standard slides 4x 1/4 and 1x 1/8.NB: delivered without pans GN.. Manufactured in stainless steel austenitic.- Electronic thermostat in closed box, waterproof.. Evaporator tubes integrated in the walls and bottom, polyurethane insulation, without CFC's.. Refrigerant R600a.. Compressor group in climate class 4 (at right side).. Ventilated condensor, with anti-fat filter protection.. Manufactured following the (CE) standards in force
%
Capacity: 5x GN1/4 h150 mmNB: delivered without GN trays. Manufactured in stainless steel (food) AISI 441, inside and outside.Stainless steel upper lid, on stainless steel hinges.Compressor unit in climate class 4, built-in the (right) board, ventilated condensor.Evaporator at copper coil, embedded in the walls.Insulation in expensed polyurethane (without CFC).Refrigerant R290.Automatic defrosting, number of defrosts programmed by the factory (modifiable at will).Electronic regulator (under...
%
Delivered with stainless steel lid(s).Standard delivered slides 6x 1/4 and 1x 1/8.NB : delivered without GN pans.. Manufactured in stainless steel austenitic.- Electronic thermostat in closed box, waterproof.. Evaporator tubes integrated in the walls and bottom, polyurethane insulation, without CFC's.. Refrigerant R600a.. Compressor group in climate class 4 (at right side).. Ventilated condensor, with anti-fat filter protection.. Manufactured following the (CE) standards in force
%
Capacity: 8x GN1/4 h 150 mmNB: delivered without GN trays. Manufactured in stainless steel (food) AISI 441, inside and outside.Stainless steel upper lid, on stainless steel hinges.Compressor unit in climate class 4, built-in the (right) board, ventilated condensor.Evaporator at copper coil, embedded in the walls.Insulation in expensed polyurethane (without CFC).Refrigerant R290.Automatic defrosting, number of defrosts programmed by the factory (modifiable at will).Electronic regulator (under...
%
Delivered with stainless steel lid(s).Standard delivered slides 9x 1/4 and 1x 1/8.NB : delivered without GN pans.. Manufactured in stainless steel austenitic.- Electronic thermostat in closed box, waterproof.. Evaporator tubes integrated in the walls and bottom, polyurethane insulation, without CFC's.. Refrigerant R600a.. Compressor group in climate class 4 (at right side).. Ventilated condensor, with anti-fat filter protection.. Manufactured following the (CE) standards in force
%
%
Capacity: 10x GN1/4, 1x 1/9 h 150 mmNB: delivered without GN trays. Manufactured in stainless steel (food) AISI 441, inside and outside.Stainless steel upper lid, on stainless steel hinges.Compressor unit in climate class 4, built-in the (right) board, ventilated condensor.Evaporator at copper coil, embedded in the walls.Insulation in expensed polyurethane (without CFC).Refrigerant R290.Automatic defrosting, number of defrosts programmed by the factory (modifiable at will).Electronic...
%
Delivered with "toughened" glass on top.Delivered with standard slides 4x 1/3 and 1x 1/8.NB: delivered without pans GN.. Manufactured in stainless steel austenitic.- Electronic thermostat in closed box, waterproof.. Evaporator tubes integrated in the walls and bottom, polyurethane insulation, without CFC's.. Refrigerant R600a.. Compressor group in climate class 4 (at right side).. Ventilated condensor, with anti-fat filter protection.. Manufactured following the (CE) standards in force
%
Capacity: GN 4x1/3, 1x1/9 h 150 mm.NB: delivered without GN trays. Manufactured in stainless steel (food) AISI 441, inside and outside.Stainless steel upper lid, on stainless steel hinges.Compressor unit in climate class 4, built-in the (right) board, ventilated condensor.Evaporator at copper coil, embedded in the walls.Insulation in expensed polyurethane (without CFC).Refrigerant R290.Automatic defrosting, number of defrosts programmed by the factory (modifiable at will).Electronic regulator...
%
Delivered with stainless steel lid(s).Standard delivered slides 6x 1/4 and 1x 1/8.NB : delivered without GN pans.. Manufactured in stainless steel austenitic.- Electronic thermostat in closed box, waterproof.. Evaporator tubes integrated in the walls and bottom, polyurethane insulation, without CFC's.. Refrigerant R600a.. Compressor group in climate class 4 (at right side).. Ventilated condensor, with anti-fat filter protection.. Manufactured following the (CE) standards in force
%
Capacity: GN 7x1/3 mm.NB: delivered without GN trays. Manufactured in stainless steel (food) AISI 441, inside and outside.Stainless steel upper lid, on stainless steel hinges.Compressor unit in climate class 4, built-in the (right) board, ventilated condensor.Evaporator at copper coil, embedded in the walls.Insulation in expensed polyurethane (without CFC).Refrigerant R290.Automatic defrosting, number of defrosts programmed by the factory (modifiable at will).Electronic regulator (under...
%
Delivered with stainless steel lid(s).Standard delivered slides 8x 1/4 et 4x 1/8.NB : delivered without GN pans.. Manufactured in stainless steel austenitic.- Electronic thermostat in closed box, waterproof.. Evaporator tubes integrated in the walls and bottom, polyurethane insulation, without CFC's.. Refrigerant R600a.. Compressor group in climate class 4 (at right side).. Ventilated condensor, with anti-fat filter protection.. Manufactured following the (CE) standards in force
%
Capacity: GN 10x1/3 h 150 mmNB: delivered without GN trays. Manufactured in stainless steel (food) AISI 441, inside and outside.Stainless steel upper lid, on stainless steel hinges.Compressor unit in climate class 4, built-in the (right) board, ventilated condensor.Evaporator at copper coil, embedded in the walls.Insulation in expensed polyurethane (without CFC).Refrigerant R290.Automatic defrosting, number of defrosts programmed by the factory (modifiable at will).Electronic regulator (under...