%
Compact, but with a large cutting capacity, realized in anodized and polished aluminum alloy.Sanitary polished and anodized aluminium alloy, hardened, chromed stainless blade, permanent tapered blade ring guard and interlocked blade guard (100% safe).Reinforced gauge plate, max. cutting capacity 250xh185 (Ø 210 mm) slice thickness 0-13 mm.Carriage sliding on stainless bearings for an easy and quiet operation, a plexiglass hand guard comes standard.Stainless steel screws and...
%
Compact machine but with an important cutting capacity.Hardened, chrome-plated and ground steel blade (Ø 300 mm), fixed protection ring and blade cover with microswitch (100% safety).Sliding of the carriage on self-lubricating bushings and ground pins.Stainless steel screws.Built-in aluminium sharpener with 2 emery wheels. On/off switch, protection class IP 44.Ventilated motor, lower protection, with direct access to the electrical elements, sealing ring on the transmission pulley,...
%
Gravity feed, 38° inclination.Max. cutting capacity 230xh175 (Ø 200 mm), slice thickness 0-30 mm.41 mm gap between blade and body. Stylish and performing, sanitary polished and anodized aluminium alloy, hardened, chromed stainless blade, permanent tapered blade ring guard and interlocked blade guard (100% safe).Reinforced gauge plate, removable slider guard.Carriage sliding on stainless bearings for an easy and quiet operation, polished, chromed and hardened sliding bar, vulcanized rubber...
%
Version with vertical blade.Double-feed carriage with a clamping arm holding firmly in place all cold meats.Cutting capacity 275 mm, plate 275xh260 mm.Cutting thickness 0-30 mm. Rounded design, no corners and sharp edges and no visible screws.Blade (Ø 300 mm) made of hardened steel, chrome and improved, tapered blade ring guard and interlocked blade guard (100% safe).Ashes of the cutting carriage in chrome, improved and polished.Carriage sliding on stainless bearings for an easy and quiet...
%
Made of "anodized aluminum", food treated.Blade in stainless steel AISI 304.Sliding carriage with transparent Plexiglas protection.Cutting capacity : 200x260 mm.Sharpening device, delivered separately, with adapter.Cutting adjustment from 0-15 mm.Easily removable blade guard.No volt release" device that prevents the machine from starting during the cleaning phase.Low voltage control 24 V, protection class IP65.Safety microswitch on the blade.Blade cover ring (100% protection).The machine is...
%
- Traction of the blade with manuel wheel (no electricity supply).- Blade in stainless steel AISI 304, automatic sharpening integrated.- Integrated blade protection (CEE standard).- Cut capacity 230x190 mm, cut adjustment from 0-8 mm, trajectory of carriage 230 mm, plate 240x275 mm.- Realisation in cast iron (bright red) and anodized aluminium.
%
Ribbon saw in stainless steel of 1550 mm. designed for cutting meat and frozen fish.Maximum cutting height 170 mm.Engine 1hp, tension regulator of the ribbon.Frame made of anodised aluminium.Security microswitch, engine brake, low tension operators.Equipped with a push-button, calibration plate in stainless steel AISI 304.
%
%
Made of food-safe "anodized aluminum".Hardened, chrome-plated steel blade.Easily removable sliding carriage with transparent Plexiglas guard.Cutting capacity: 200x260 mm.Built-in automatic sharpening.Cutting range 0-15 mm.Easily removable blade guard.“No volt release" device prevents machine start-up during cleaning phase.24 V low-voltage control, IP65 protection.Safety microswitch on blade.Blade cover ring (100% protection).Built in compliance with current CE standards.
%
%
Delivered with stainless steel lidDelivered with standard slides 4x 1/4 and 1x 1/8.NB: delivered without pans GN.. Manufactured in stainless steel austenitic.- Electronic thermostat in closed box, waterproof.. Evaporator tubes integrated in the walls and bottom, polyurethane insulation, without CFC's.. Refrigerant R600a.. Compressor group in climate class 4 (at right side).. Ventilated condensor, with anti-fat filter protection.. Manufactured following the (CE) standards in force
%
Capacity: 5x GN1/4 h150 mmNB: delivered without GN trays. Manufactured in stainless steel (food) AISI 441, inside and outside.Stainless steel upper lid, on stainless steel hinges.Compressor unit in climate class 4, built-in the (right) board, ventilated condensor.Evaporator at copper coil, embedded in the walls.Insulation in expensed polyurethane (without CFC).Refrigerant R290.Automatic defrosting, number of defrosts programmed by the factory (modifiable at will).Electronic regulator (under...
%
Delivered with stainless steel lid(s).Standard delivered slides 6x 1/4 and 1x 1/8.NB : delivered without GN pans.. Manufactured in stainless steel austenitic.- Electronic thermostat in closed box, waterproof.. Evaporator tubes integrated in the walls and bottom, polyurethane insulation, without CFC's.. Refrigerant R600a.. Compressor group in climate class 4 (at right side).. Ventilated condensor, with anti-fat filter protection.. Manufactured following the (CE) standards in force
%
Capacity: 8x GN1/4 h 150 mmNB: delivered without GN trays. Manufactured in stainless steel (food) AISI 441, inside and outside.Stainless steel upper lid, on stainless steel hinges.Compressor unit in climate class 4, built-in the (right) board, ventilated condensor.Evaporator at copper coil, embedded in the walls.Insulation in expensed polyurethane (without CFC).Refrigerant R290.Automatic defrosting, number of defrosts programmed by the factory (modifiable at will).Electronic regulator (under...
%
Delivered with stainless steel lid(s).Standard delivered slides 9x 1/4 and 1x 1/8.NB : delivered without GN pans.. Manufactured in stainless steel austenitic.- Electronic thermostat in closed box, waterproof.. Evaporator tubes integrated in the walls and bottom, polyurethane insulation, without CFC's.. Refrigerant R600a.. Compressor group in climate class 4 (at right side).. Ventilated condensor, with anti-fat filter protection.. Manufactured following the (CE) standards in force
%
Capacity: 10x GN1/4, 1x 1/9 h 150 mmSupport strip trays GN 1/9 are delivered standard.NB: delivered without GN trays. Manufactured in stainless steel (food) AISI 441, inside and outside.Stainless steel upper lid, on stainless steel hinges.Compressor unit in climate class 4, built-in the (right) board, ventilated condensor.Evaporator at copper coil, embedded in the walls.Insulation in expensed polyurethane (without CFC).Refrigerant R290.Automatic defrosting, number of defrosts programmed by...
%
Delivered with "toughened" glass on top.Delivered with standard slides 4x 1/3 and 1x 1/8.NB: delivered without pans GN.. Manufactured in stainless steel austenitic.- Electronic thermostat in closed box, waterproof.. Evaporator tubes integrated in the walls and bottom, polyurethane insulation, without CFC's.. Refrigerant R600a.. Compressor group in climate class 4 (at right side).. Ventilated condensor, with anti-fat filter protection.. Manufactured following the (CE) standards in force
%
Capacity: GN 4x1/3, 1x1/9 h 150 mm.Support strip trays GN 1/9 are delivered standard.NB: delivered without GN trays. Manufactured in stainless steel (food) AISI 441, inside and outside.Stainless steel upper lid, on stainless steel hinges.Compressor unit in climate class 4, built-in the (right) board, ventilated condensor.Evaporator at copper coil, embedded in the walls.Insulation in expensed polyurethane (without CFC).Refrigerant R290.Automatic defrosting, number of defrosts programmed by the...
%
Delivered with stainless steel lid(s).Standard delivered slides 6x 1/4 and 1x 1/8.NB : delivered without GN pans.. Manufactured in stainless steel austenitic.- Electronic thermostat in closed box, waterproof.. Evaporator tubes integrated in the walls and bottom, polyurethane insulation, without CFC's.. Refrigerant R600a.. Compressor group in climate class 4 (at right side).. Ventilated condensor, with anti-fat filter protection.. Manufactured following the (CE) standards in force
%
Capacity: GN 7x1/3 mm.NB: delivered without GN trays. Manufactured in stainless steel (food) AISI 441, inside and outside.Stainless steel upper lid, on stainless steel hinges.Compressor unit in climate class 4, built-in the (right) board, ventilated condensor.Evaporator at copper coil, embedded in the walls.Insulation in expensed polyurethane (without CFC).Refrigerant R290.Automatic defrosting, number of defrosts programmed by the factory (modifiable at will).Electronic regulator (under...
%
Delivered with stainless steel lid(s).Standard delivered slides 8x 1/4 et 4x 1/8.NB : delivered without GN pans.. Manufactured in stainless steel austenitic.- Electronic thermostat in closed box, waterproof.. Evaporator tubes integrated in the walls and bottom, polyurethane insulation, without CFC's.. Refrigerant R600a.. Compressor group in climate class 4 (at right side).. Ventilated condensor, with anti-fat filter protection.. Manufactured following the (CE) standards in force
%
Capacity: GN 10x1/3 h 150 mmNB: delivered without GN trays. Manufactured in stainless steel (food) AISI 441, inside and outside.Stainless steel upper lid, on stainless steel hinges.Compressor unit in climate class 4, built-in the (right) board, ventilated condensor.Evaporator at copper coil, embedded in the walls.Insulation in expensed polyurethane (without CFC).Refrigerant R290.Automatic defrosting, number of defrosts programmed by the factory (modifiable at will).Electronic regulator (under...
%