%
Stainless steel construction.Productivity: 17 cups in 7 minutes.Automatic filling of the tank, direct connection to the water system or manual filling through the upper valve (equipped with safety grid), tank capacity 2.5 liters (equipped with overflow device).Ergonomic filter holder (Ø 90 mm), made of stainless steel and equipped with an athermic handle.Spray nozzle for a better coffee infusion.To start the brewing process, press the "On/Off" switch and then press the "Brew" button, the...
%
Stainless steel construction.Productivity: 17 cups in 7 minutes.Manual filling (cold water) of the tank through the upper valve (with safety grid), tank capacity 2,5 liters (with overflow device).Ergonomic filter holder (Ø 90 mm), made of stainless steel and equipped with athermal handle.Spray nozzle for a better coffee infusion.On/Off switch to start the brewing process, the indicator light (Brewing) lights up to indicate the current cycle.Boiler capacity 0,3 liter, made in stainless...
%
Stainless steel construction.Automatic filling of the tank, direct connection to the water system or manual filling through the upper valve (equipped with a safety grid), tank capacity 2.2 liters (equipped with an overflow device).Ergonomic filter holder (Ø 90 mm), made of stainless steel and equipped with athermal handle.Spray nozzle for a better coffee infusion.To start the brewing process, press the "On/Off" switch and then press the "Brew" button, the "Filling" and "Heating" lights will...
%
Stainless steel construction.Manual filling (cold water) of the tank through the upper valve (equipped with a safety grid), tank capacity 2,2 liters (equipped with an overflow device).Ergonomic filter holder (Ø 90 mm), made of stainless steel and equipped with athermal handle.Spray nozzle for a better coffee infusion.On/Off switch to start the brewing process, the indicator light (Brewing) lights up to indicate the current cycle.Boiler capacity 0,3 liter, made of stainless steel.Safety device...
%
Included: 2 grids (405x460 mm), with slides4 adjustable stainless steel feet. Monobloc structure, made inside and outside (including the back) of austenitic stainless steel (food-grade), top (40 mm).Embossed interior bottom, with a large maintenance drain plug, rounded corners (smooth), stainless steel racks and slides (anti-tilt).Doors with flush-mounted handles (non-protruding), magnetic seal (easy replacement without tools), hinges with automatic return (locking at 90°).Compressor unit in...
%
1 ventilated evaporator.Included: 1 grid GN 1/1 (530x325 mm), by door.4 adjustable stainless steel feet.Monocoque designManufactured in stainless steel, inside AISI 304, outside AISI 441.Independent upper top (dismountable), stainless steel AISI 304.Stainless steel rack and slides (anti-tilting), allowing to place the grids as one pleases.Stamped interior bottom, rounded angles and corners (without roughness).Doors with ergonomic handle (no salient) and reversible (kit is not necessary),...
%
Refrigeration unit on the left side.1 ventilated evaporator.Included: 1 grid GN 1/1 (530x325 mm), by door.4 adjustable stainless steel feet.Conception MonocoqueManufactured in stainless steel, inside AISI 304, outside AISI 441.Independent upper top (dismountable), stainless steel AISI 304.Stainless steel rack and slides (anti-tilting), allowing to place the grids as one pleases.Stamped interior bottom, rounded angles and corners (without roughness).Doors with ergonomic handle (no salient) and...
%
Basin manufactured in stainless steel AISI 304,bottom in stainless steel AISI 316.Diameter of the basin 420, depth 485 mm.Outlet tap of 1",1/2. Made of 18/10 AISI 304 stainless steel, deep-drawn "Top" thickness 15/10th, adjustable stainless steel feet (150/200 mm), waterproof "IPX5".Deep-drawn" tank made of AISI 316 stainless steel (Food certified according to European regulation CE n.1935/2004), bottom 30/10 mm thick, side walls 20/10 mm thick, resistant to salt corrosion and wear, equipped...
%
Basin manufactured in stainless steel AISI 304,bottom in stainless steel AISI 316.Diameter of the basin 420, depth 485 mm.Outlet tap of 1",1/2. Made of 18/10 AISI 304 stainless steel, deep-drawn "Top" thickness 15/10th, adjustable stainless steel feet (150/200 mm), waterproof "IPX5".Deep-drawn" tank made of AISI 316 stainless steel (Food certified according to European regulation CE n.1935/2004), bottom 30/10 mm thick, side walls 20/10 mm thick, resistant to salt corrosion and wear, equipped...
%
Tank diameter 600, depth 400 mm.2" drain valve. Constructed in stainless steel AISI 304, "top" pressed (20/10 mm), adjustable stainless steel feet (150-200 mm), water tightness "IPX5"."Pressed" tank made of stainless steel AISI 316 (Food certified according to European regulation CE n.1935/2004), equipped with a removable strainer. Water tap for filling the tank."Pressed" lid made of stainless steel AISI 316 with double walls "reinforced edges", hinges with "torsion spring" allowing gradual...
%
Tank diameter 600, depth 400 mm.2" drain valve. Constructed in stainless steel AISI 304, "top" pressed (20/10 mm), adjustable stainless steel feet (150-200 mm), water tightness "IPX5"."Pressed" tank made of stainless steel AISI 316 (Food certified according to European regulation CE n.1935/2004), equipped with a removable strainer. Water tap for filling the tank."Pressed" lid made of stainless steel AISI 316 with double walls "reinforced edges", hinges with "torsion spring" allowing gradual...
%
Tank diameter 600, depth 530 mm.2" drain valve. Constructed in stainless steel AISI 304, "top" pressed (20/10 mm), adjustable stainless steel feet (150-200 mm), water tightness "IPX5"."Pressed" tank made of stainless steel AISI 316 (Food certified according to European regulation CE n.1935/2004), equipped with a removable strainer. Water tap for filling the tank."Pressed" lid made of stainless steel AISI 316 with double walls "reinforced edges", hinges with "torsion spring" allowing gradual...
%
Tank diameter 600, depth 530 mm.2" drain valve. Constructed in stainless steel AISI 304, "top" pressed (20/10 mm), adjustable stainless steel feet (150-200 mm), water tightness "IPX5"."Pressed" tank made of stainless steel AISI 316 (Food certified according to European regulation CE n.1935/2004), equipped with a removable strainer. Water tap for filling the tank."Pressed" lid made of stainless steel AISI 316 with double walls "reinforced edges", hinges with "torsion spring" allowing gradual...
%
Tank diameter 400 mm, depth 420 mm.Drain tap 6/4". Made of stainless steel AISI 304, adjustable feet in stainless steel.Pressed and sealed top (15/10 mm) in stainless steel AISI 304.Rear chimney in stainless steel AISI 304.Deep-drawn tank made of AISI 304 stainless steel, bottom in AISI 316 stainless steel (bottom of the tank 30/10 mm thick, side walls 20/10 mm thick), resistant to salt corrosion and wear, equipped with removable strainer for protection of the drain valve, corners with...
%
Diameter of the tank 600 mm, depth 420 mm.Drainage tap 2".Made in stainless steel AISI 304, adjustable feet in stainless steel.Stamped and waterproof top (20/10 mm) in stainless steel AISI 304.Chimney in the back in stainless steel AISI 304."Stamped" tank in stainless steel AISI 304, bottom in stainless steel AISI 316 30/10 mm, side walls in 20/10 mm, resistant to salt corrosion and wear, provided with a removable strainer for protection of the drain valve, corners with rounded interior...
%
Diameter of the tank 600 mm, deep 540 mm.Drainage tap 2".Made in stainless steel AISI 304, adjustable feet in stainless steel.Stamped and waterproof top (20/10 mm) in stainless steel AISI 304.Chimney in the back in stainless steel AISI 304."Stamped" tank in stainless steel AISI 304, bottom in stainless steel AISI 316 30/10 mm, side walls in 20/10 mm, resistant to salt corrosion and wear, provided with a removable strainer for protection of the drain valve, corners with rounded interior...
%
Included: 2 GN grids (325x535 mm), with guides.4 adjustable stainless steel feet. Monobloc structure, made inside and outside (including the rear) of austenitic stainless steel (food-grade), top (40 mm).Interior bottom is embossed, with a large maintenance drain plug, rounded corners (without roughness), stainless steel grids and guides (anti-tilting).Doors with recessed handles (non-protruding), magnetic seal (easy replacement without tools), hinges with automatic return (locking at...
%
- Diameter of the basin 420, depth 485 mm.- Outlet tap of 1,1/2".- Made of AISI 304 stainless steel, "deep drawn" top (15/10th), adjustable stainless steel feet (150/200 mm), waterproof "IPX5". - Deep-drawn" tank made of AISI 316 stainless steel, bottom 30/10 mm thick, side walls 20/10 mm thick, resistant to salt corrosion and wear, equipped with a removable strainer to protect the drain valve. Water tap for filling the tank. - Deep-drawn" cover, made of AISI 316 stainless steel with double...
%
Diameter of the basin 420, depth 485 mm.Outlet tap of 1,1/2". Made of AISI 304 stainless steel, "deep-drawn" top (15/10 mm), adjustable stainless steel feet (150/200 mm), waterproof "IPX5".Deep-drawn" tank made of AISI 316 stainless steel (Food certified according to European regulation CE n.1935/2004), bottom 30/10 mm thick, side walls 20/10 mm thick, resistant to salt corrosion and wear, equipped with a removable strainer to protect the drain valve. Water tap for filling the...
%
Tank diameter 600, depth 400 mm.2" drain valve. Made of AISI 304 stainless steel, adjustable stainless steel feet.Deep-drawn" tank made of AISI 304 stainless steel (Food certified according to European regulation CE n.1935/2004), equipped with a removable strainer. Water tap for filling the tank.Deep-drawn" cover, hinges with "torsion spring" allowing gradual closing and opening.Gas heating, by stainless steel burners with stabilized flame, regulation by valve.Appliances built in compliance...
%
Tank diameter 600, depth 530 mm.2" drain valve. Made of AISI 304 stainless steel, adjustable stainless steel feet.Deep-drawn" tank made of AISI 304 stainless steel (Food certified according to European regulation CE n.1935/2004), equipped with a removable strainer. Water tap for filling the tank.Deep-drawn" cover, hinges with "torsion spring" allowing gradual closing and opening.Gas heating, by stainless steel burners with stabilized flame, regulation by valve.Appliances built in compliance...
%
Tank diameter 600, depth 530 mm.2" drain valve. Constructed in stainless steel AISI 304, adjustable stainless steel feet.Tank "pressed" made of stainless steel AISI 304 (Food certified according to European regulation CE n.1935/2004), equipped with a removable strainer. Water tap for filling the tank."Pressed" lid, hinges with "torsion spring" allowing gradual closing and opening.Indirect heating, double-walled tank, water filling through a tap, a second one serving as an overflow to check...
%
Tank diameter 400 mm, depth 420 mm.6/4" drain valve.Made of AISI 304 stainless steel, adjustable stainless steel feet.Deep-drawn and waterproof top (15/10 mm) in AISI 304 stainless steel.Rear chimney in AISI 304 stainless steel.Deep-drawn" tank made of AISI 304 stainless steel, bottom made of AISI 316 stainless steel (bottom of the tank 30/10 mm thick, side walls 20/10 mm thick), resistant to salt corrosion and wear, equipped with a removable strainer to protect the drain valve, rounded inner...
%
Diameter of the tank 600 mm, depth 420 mm.2" drain tap.Made in stainless steel AISI 304, adjustable feet in stainless steel.Stamped and waterproof top (20/10 mm) in stainless steel AISI 304.Chimney in the back in stainless steel AISI 304."Stamped" tank in stainless steel AISI 304, bottom in stainless steel AISI 316 (30/10 mm, side walls 20/10 mm), resistant to salt corrosion and usury, provided with a removable strainer for protection of the drain valve, corners with rounded interior angles....