%
Version to fit in to or to put down.Delivered with 2 pressure bottles, with one tap fit on to 3 exits (easy dosing).Thermostatic control until 90°C, hold temperature = 50°C. (without overheating nor desiccation).Electrical resistance around the stainless steel tray.Electronic timer.
%
2 Speeds (Spiral : 1st speed 100 rpm. and 2nd speed 200rpm) & (Tank : 1st speed 10rpm. and 2nd speed 20rpm and timer) with possibility of automatic programming.Diameter of the spiral 22 mm.Diameter of the tank 400 mm height 260 mm (33 liters) = 25 kg dough.Digital control panel (manual or automatic operation).Structure made of painted steel.Rotating cockpit in stainless steel AISI 304.High hardness steel spiral, stainless steel divider AISI 304.Grid in stainless steel equipped with a...
%
- 2 Speeds (Spiral : 1st speed 100 rpm. and 2nd speed 200rpm) & (Tank : 1st speed 10rpm. and 2nd speed 20rpm and timer) with possibility of automatic programming. - Diameter of the spiral 22 mm. - Diameter of the tank 400 mm height 260 mm (33 liters) = 25 kg dough.- Digital control panel (manual or automatic operation). - Structure made of painted steel. - Rotating cockpit (not removable) in stainless steel AISI 304. - High hardness steel spiral, stainless steel divider AISI 304.- Grid in...
%
1-speed model.Standard with timer.Diameter of the bowl 400 mm (33 liters) = 25 kg dough. Frame made of steel with oven painting.Rotating bowl (not removable) in stainless steel AISI 304.Spiral in high hardness steel, dividing ploughshare in stainless steel AISI 304.Stainless steel grid equipped with a safety micro switch.Transmission by gear motor in oil bath, reliable, efficient and silent!Suspended motor, better ventilation, easy maintenance.Low voltage control 24 V. (IP65), NVR (No-Voltage...
%
1-speed model.Standard with timer.Diameter of the bowl 400 mm (33 liters) = 25 kg dough. Frame made of steel with oven painting.Rotating bowl (not removable) in stainless steel AISI 304.Spiral in high hardness steel, dividing ploughshare in stainless steel AISI 304.Stainless steel grid equipped with a safety micro switch.Transmission by gear motor in oil bath, reliable, efficient and silent!Suspended motor, better ventilation, easy maintenance.Low voltage control 24 V. (IP65), NVR (No-Voltage...
%
2 Speeds.Standard with timer.Diameter of the bowl 400 mm (33 liters) = 25 kg dough. Structure made of painted steel.Rotating cockpit (not removable) in stainless steel AISI 304.High hardness steel spiral, stainless steel divider AISI 304.Grid in stainless steel equipped with a security microswitch.Oil transmission/gear box, for more reliability and low sound emission!!Engine suspended, better ventilation, easier maintenance.Low voltage control 24 V (IP65), NVR (No-Voltage Release) avoiding...
%
2 Speeds.Standard with timer.Diameter of the bowl 400 mm (33 liters) = 25 kg dough. Structure made of painted steel.Rotating cockpit (not removable) in stainless steel AISI 304.High hardness steel spiral, stainless steel divider AISI 304.Grid in stainless steel equipped with a security microswitch.Oil transmission/gear box, for more reliability and low sound emission!!Engine suspended, better ventilation, easier maintenance.Low voltage control 24 V (IP65), NVR (No-Voltage Release) avoiding...
%
1-speed model.Standard with timer.Diameter of the bowl 400 mm (33 liters) = +/-25 kg dough. Frame made of steel with oven painting.Rotating bowl (not removable) in stainless steel AISI 304.Spiral in high hardness steel, dividing ploughshare in stainless steel AISI 304.Stainless steel grid equipped with a safety micro switch.Transmission by gear motor in oil bath, reliable, efficient and silent!Suspended motor, better ventilation, easy maintenance.Control panel with IP21 protection.Standard...
%
2 Speeds.Standard with timer.Diameter of the bowl 400 mm (33 liters) = +/-25 kg dough. Structure made of painted steel.Rotating cockpit (not removable) in stainless steel AISI 304.High hardness steel spiral, stainless steel divider AISI 304.Grid in stainless steel equipped with a security microswitch.Oil transmission/gear box, for more reliability and low sound emission!!Engine suspended, better ventilation, easier maintenance.Control panel with IP21 protection.Standard delivered with wheels...
%
2 Speeds.Standard with timer.Diameter of the bowl 400 mm (33 liters) = 25 kg dough. Structure made of painted steel.Rotating cockpit (not removable) in stainless steel AISI 304.High hardness steel spiral, stainless steel divider AISI 304.Grid in stainless steel equipped with a security microswitch.Oil transmission/gear box, for more reliability and low sound emission!!Engine suspended, better ventilation, easier maintenance.Low voltage control 24 V (IP65), NVR (No-Voltage Release) avoiding...
%
"Wall" model with back board.2 ventilated evaporators.Included: 1 grid GN 1/1 (530x325 mm), by door.6 adjustable stainless steel feet.Monocoque designManufactured in stainless steel, inside AISI 304, outside AISI 441.Independent upper top (dismountable), stainless steel AISI 304.Stainless steel rack and slides (anti-tilting), allowing to place the grids as one pleases.Stamped interior bottom, rounded angles and corners (without roughness).Doors with ergonomic handle (no salient) and...
%
Wall-mounted" version with raised rear edge.Included: 4 GN grids (325x535 mm), with guides.6 adjustable stainless steel feet. Monobloc structure, made inside and outside (including the rear) of austenitic stainless steel (food-grade), top (40 mm).Interior bottom is embossed, with a large maintenance drain plug, rounded corners (without roughness), stainless steel grids and guides (anti-tilting).Doors with recessed handles (non-protruding), magnetic seal (easy replacement without tools),...
%
Wall-mounted version with raised rear edge.Included: 1 grid GN1/1 (530x325mm), per door.6 adjustable stainless steel feet.Can be installed on a base.Interior and exterior made of AISI 304 stainless steel (food grade), monocoque frameIndependent top (removable), in stainless steel (food grade) AISI 304Stainless steel racks and slides (antitilt), allowing the grids to be positioned as desired, deep-drawn inner bottom and rounded corners and angles (without rough edges)Doors with ergonomic (not...
%
Sink 300x330xh200 mm built into the top (on the right), equipped with a trap, strainer, and overflow drain (NB faucet on request, hole on the top (33 mm)"Wall-mounted" version with raised back edgeIncluded: 1 GN1/1 grid (530x325mm), per door6 adjustable stainless steel legs.Installation possible on a base. Interior and exterior made of food-grade AISI 304 stainless steel, monocoque chassisIndependent (removable) top made of food-grade AISI 304 stainless steelStainless steel (anti-tilt) racks...
%
Refrigeration unit positioned on the left.Wall-mounted version with raised rear edge.Included: 1 grid GN1/1 (530x325mm), per door.6 adjustable stainless steel feet.Can be installed on a base.Interior and exterior made of AISI 304 stainless steel (food grade), monocoque frameIndependent top (removable), in stainless steel (food grade) AISI 304Stainless steel racks and slides (antitilt), allowing the grids to be positioned as desired, deep-drawn inner bottom and rounded corners and angles...
%
Wall" version with raised rear edge 100-150 mm "straight".Top with 50 mm edge (15/10th)Included: 4 pairs of slides for 600x400 mm plates, per door6 adjustable stainless steel feet.Can be installed on a base.Interior and exterior made of AISI 304 stainless steel (food grade), monocoque frameIndependent top top (removable), in stainless steel (food grade) AISI 304Stainless steel racks and slides (maximum capacity 8 slides, spacing 68 mm), allowing the plates to be positioned as desired,...
%
Sink 340x400x200mm integrated in the work top (right side), delivered with a siphon; drain screen and overflow (NB: tap on request, opening on the work top (27 mm))."Wall" model with turned-up back edge.2 ventilated evaporators.Included: 1 grid GN 1/1 (530x325 mm), per door.6 adjustable stainless steel feet.Monocoque designManufactured in stainless steel, inside AISI 304, outside AISI 441.Independent upper top (dismountable), stainless steel AISI 304.Stainless steel rack and slides...
%
Refrigeration unit on the left side."Wall" model with back board.2 ventilated evaporators.Included: 1 grid GN 1/1 (530x325 mm), by door.6 adjustable stainless steel feet.Monocoque designManufactured in stainless steel, inside AISI 304, outside AISI 441.Independent upper top (dismountable), stainless steel AISI 304.Stainless steel rack and slides (anti-tilting), allowing to place the grids as one pleases.Stamped interior bottom, rounded angles and corners (without roughness).Doors with...