%
Connection cold or warm water.Upper basin with 3 compartments for washing products.Emergency stop button, "Hot shot" kind.Stainless steel base allowing the ground anchor.Designed in stainless steel AISI 304.
%
Capacity 5 liters.Structure in stainless steel, polycarbonate basin.Heating through bain-marie, thermostat to keep the temperature constant.
%
- Water condenser.- Automatic pasteurizer for high and low pasteurization. - Transparent cover. - Faucet has an integrated cleaning system. - Intelligent memory that allows to repeat, if necessary, the pasteurization cycle. - Mix per cycle: 60/120 litres. - Cycle time: 100/120 min.
%
- Water condenser.- Automatic pasteurizer for high and low pasteurization. - Transparent cover. - Faucet has an integrated cleaning system. - Intelligent memory that allows to repeat, if necessary, the pasteurization cycle. - Mix per cycle: 60/120 litres. - Cycle time: 100/120 min.
%
%
%
Superior top 1.5 mm, rounded edge.Ventilated refrigeration with uniform airflows in order to guarantee a homogenous distribution of the cold, even on the shelves of the display, thanks to its particular system of the cold canalization.Pressed basin GN-150 mm, rounded corners, drainage.Display with 3 shelves, opened on customer side.Made in stainless steel AISI 304.Built in hermetic unit.Refrigerant gas R290.
%
Superior top 1.5 mm, rounded edge, pressed 20 mm deep for dimensions GN with rounded corners, drainage.Ventilated refrigeration with uniform airflows in order to guarantee a homogenous distribution of the cold, even on the shelves of the display, thanks to its particular system of the cold canalization.Display with 3 shelves, opened on customer side.Made in stainless steel AISI 304.Built in hermetic unit.Refrigerant gas R290.
%
Superior top 1.5 mm, rounded edge.Ventilated refrigeration with uniform airflows in order to guarantee a homogenous distribution of the cold, even on the shelves of the display, thanks to its particular system of the cold canalization.Pressed basin GN-150 mm, rounded corners, drainage.Display with 3 shelves, opened on customer side.Made in stainless steel AISI 304.Built in hermetic unit.Refrigerant gas R290.
%
Superior top 1.5 mm, rounded edge, pressed 20 mm deep for dimensions GN with rounded corners, drainage.Ventilated refrigeration with uniform airflows in order to guarantee a homogenous distribution of the cold, even on the shelves of the display, thanks to its particular system of the cold canalization.Display with 3 shelves, opened on customer side.Made in stainless steel AISI 304.Built in hermetic unit.Refrigerant gas R290.
%
Oven payload plates GN 2/1 (or GN 1/1).Load capacity 100 Kg.Lateral structures less than 65 mm "anti-tipping".Core temperature probe.Charger 600x400 EURONORM (on request ref : AC/P12...)NB: delivered without grids and without GN plates. Inner and outer construction in stainless steel AISI 304, thermal insulation in ceramic fibre, control panel with stainless steel filter, preventing soiling of the components (ventilated panel), stainless steel feet. Cooking chamber: fully welded, completely...
%
Oven payload plates GN 2/1 (or GN 1/1).Load capacity 100 Kg.Lateral structures less than 65 mm "anti-tipping".Core temperature probe.Charger 600x400 EURONORM (on request ref : AC/P12...)NB: delivered without grids and without GN plates. Inner and outer construction in stainless steel AISI 304, thermal insulation in ceramic fibre, control panel with stainless steel filter, preventing soiling of the components (ventilated panel), stainless steel feet. Cooking chamber: fully welded, completely...
%
Oven payload plates GN 2/1 (or GN 1/1).Load capacity 100 Kg.Lateral structures less than 65 mm "anti-tipping".Core temperature probe.Charger 600x400 EURONORM (on request ref : AC/P12...)NB: delivered without grids and without GN plates. Inner and outer construction in stainless steel AISI 304, thermal insulation in ceramic fibre, control panel with stainless steel filter to prevent the components from getting dirty (ventilated panel), stainless steel feet. Cooking chamber: fully welded,...
%
Oven payload plates GN 2/1 (or GN 1/1).Load capacity 100 Kg.Lateral structures less than 65 mm "anti-tipping".Core temperature probe.Charger 600x400 EURONORM (on request ref : AC/P12...)NB: delivered without grids and without GN plates. Inner and outer construction in stainless steel AISI 304, thermal insulation in ceramic fibre, control panel with stainless steel filter to prevent the components from getting dirty (ventilated panel), stainless steel feet. Cooking chamber: fully welded,...
%
Superior top 1.5 mm, rounded edge.Pressed basin GN-150 mm, rounded corners, drainage.Refrigeration ventilated with uniform airflows in order to guarantee a homogenous distribution of the cold.Made in stainless steel AISI 304.Built in hermetic unit.Refrigerant gas R290.
%
Superior top 1.5 mm, rounded edge.Ventilated refrigeration with uniform airflows in order to guarantee a homogenous distribution of the cold, even on the shelves of the display, thanks to its particular system of the cold canalization.Pressed basin GN-150 mm, rounded corners, drainage.Display with 3 shelves, sliding doors on service side, opened doors on customer side.Made in stainless steel AISI 304.Built in hermetic unit.Refrigerant gas R290.
%
Internal dimensions 660x420xh820Standard equipment: 1 grid EN 600x4003 "autoreverse" turbines. Welded room in stainless steel (AISI 304). , rounded edges and angles, pressed bottom with draining .Removable carrying-plate structure (75 mm).Chimney for evacuation of the condensate adjustable motorised.Interior lighting.(automatic ignition)Built-in condensate bowl (on the door), connected directly to the discharge.Double glazing door (option: door with hinges on the right), interior window on...
%
%
Superior top 1.5 mm, rounded edge.Ventilated refrigeration with uniform airflows in order to guarantee a homogenous distribution of the cold, even on the shelves of the display, thanks to its particular system of the cold canalization.Pressed basin GN-150 mm, rounded corners, drainage.Display with 2 shelves, sliding doors on service side.Made in stainless steel AISI 304.Built in hermetic unit.Refrigerant gas R290.
%
Superior top 1.5 mm, rounded edge, pressed 20 mm deep for dimensions GN with rounded corners, drainage.Ventilated refrigeration with uniform airflows in order to guarantee a homogenous distribution of the cold.Made in stainless steel AISI 304.Built in hermetic unit.Refrigerant gas R290.
%
%
Superior top 1.5 mm, rounded edge, pressed 20 mm deep for dimensions GN with rounded corners, drainage.Ventilated refrigeration with uniform airflows in order to guarantee a homogenous distribution of the cold, even on the shelves of the display, thanks to its particular system of the cold canalization.Display with 3 shelves, sliding doors on service side and opened on customer side.Made in stainless steel AISI 304.Built in hermetic unit.Refrigerant gas R290.
%
Superior top 1.5 mm, rounded edge, pressed 20 mm deep for dimensions GN with rounded corners, drainage.Ventilated refrigeration with uniform airflows in order to guarantee a homogenous distribution of the cold, even on the shelves of the display, thanks to its particular system of the cold canalization.Display with 3 shelves, sliding doors on service side.Made in stainless steel AISI 304.Built in hermetic unit.Refrigerant gas R290.
%
Entièrement réalisé en acier inxoydable.Cette machine est concue pour une production de pâtes à partir de matières première telle que farine de blé dur ou tendre avec adjonction d'eau et/ou d'oeufs, de même d'épinards pour les pâtes vertes ou concentré de tomates pour les rouges.De base elle permet de pétrir de la pâte (capacité cuve 4 kg de farine) ainsi que laminer des feuilles de pâtes largeur 170 mm (épaisseur réglable).La machine est conforme aux normes "CE" en vigueur en matière de...