%
Temperature: -2° -14°C- Manufactured in solid wood.- Plexiglas dome.- Stainless steel AISI 304 display area.- Built-in airtight unit (ambient t° +32°C).- Static evaporator treated against the "coating" acids and the salts. - Refrigerant R134A.- Frame on castors.- Manual defrosting.NB: for the temperature update, this trolley needs to be connected on an electric network +/- 2 hours in advance ; then store the ice cream which might be at its service temperature (-14°C), this trolley isn't...
%
Turns/minute: 15000 rpm.On/Off switch, stainless steel screws.. ABS molded body, inner stainless steel and aluminium structure, polished aluminium hopper, 2 liters receiving receptacle en ABS molded.. Fitted with safety microswitch on hopper lever and receiving receptacle, fitted with thermal motor relay.. Sturdy belt-driven transmission, minimal power loss.. The equipment is manufactured following the (CE) standards in force.
%
%
%
%
Height of plates load Ø 390 mm (height glasses 355 mm).From 30 to 20 baskets/hour, PLD cycles 120", 150", continuous and " Sanitisation".3 phases: wash, unload, rinse.Standard discharge pump.Standard rinse pump (atmospheric boiler). Realization: fully manufactured in stainless steel AISI 304. Rotating wash and rinse arm (composite). Tank's filter (composite) (15 lt - 1,4 kW). Moulded polypropylene wash chamber, with external pipes. Pump filter in polypropylene. Wash pump (double flux) 0,63 Hp...
%
Built-in continuous water softener (ATTENTION: cold water connection).Plate loading height Ø 390mm (glass height 355 mm).From 30 to 20 baskets/hour, PLD cycles 120", 150", continuous and "Sanitisation".3 phases: washing, discharging, rinsing.Drain pump as standard.Standard rinsing pump (atmospheric boiler). Realization: fully manufactured in stainless steel AISI 304. Rotating wash and rinse arm (composite). Tank's filter (composite) (15 lt - 1,4 kW). Moulded polypropylene wash chamber, with...
%
Turns per minute: 2600 rpm.Tank capacity: 3,3 Lt.Useful tank capacity: 1,5 Lt. Made of stainless steel AISI 304.18/10 stainless steel tank, thermo-diffuser bottom, transportable tank equipped with handles, easy to empty and wash.Ventilated motor, (for intensive use).No heat transmission on the product (motor and tank are side by side).Very sturdy knife (standard 1 smooth knife), with curved blades in hardened "cutlery" steel.High safety guaranteed by a double micro-switch on the lid.Lid in...
%
Standard with speed drive.Turns per minute: 1100/2600 rpm.Tank capacity: 5,3 LtUseful tank capacity: 3,1 Lt Made of stainless steel AISI 304.18/10 stainless steel tank, thermo-diffuser bottom, transportable tank equipped with handles, easy to empty and wash.Ventilated motor, (for intensive use).No heat transmission on the product (motor and tank are side by side).Very sturdy knife (standard 1 smooth knife), with curved blades in hardened "cutlery" steel.High safety guaranteed by a double...
%
Structure support AISI 304 for gastronome tray, maximum depth 150mm.Refrigerated display vat available only on ventilated showcase.Bain-marie and dry heat display vat available only on neutral display case.NB: It is recommended not to put an intermediate shelf.
%
%
%
%
%
%
- Turns/minute: rpm 145.- Duration of the production cycle 90-120 sec.- Color BLACK.- Stainless steel undercarriage AISI 304.- Stainless steel tank AISI 304, 100% hygienic, without rough part and rounded edges. - Plexiglas see-through lid allowing a field of vision of the production, safety DIP switch.- Abrasive turning trays and walls also fitted with an abrasive tape (both are easily transportable for the cleaning, the operations don't require any specialized labor). - Digital control panel...
%
- Turns/minute : rpm 180.- Duration of the production cycle 120-150 sec.- Color BLACK.- Stainless steel undercarriage AISI 304.- Stainless steel tank AISI 304, 100% hygienic, without rough part and rounded edges. - Plexiglas see-through lid allowing a field of vision of the production, safety DIP switch.- Abrasive turning trays and walls also fitted with an abrasive tape (both are easily transportable for the cleaning, the operations don't require any specialized labor). - Digital control...
%
Made of AISI 441 stainless steel.Heating by electric resistance.Thermostat control.Reinforced shelves.Welded structure.
%
%
%
%
Superior top 1.5 mm, rounded edges 70 mm.Pressed tank GN200 mm, corners rounded, drainage and overflow.Water level in the basin controlled by electro valve.Electric heating by element sited under tank.Ventilated cupboard, heated by electric element.Made in stainless steel with adjustable feet in stainless steel 150 mm.
%
Exterior chassis in "aluminum alloy".The body of the chopper and the inside out leadscrew are also manufactured in treated "aluminum alloy" for food and stainless steel, all the interior parts are easily dismantled allowing easy maintenance.Upper bowl in stainless steel AISI 304.Standard delivered with a 6 mm grid.Grid and blade in stainless steel "auto-sharping".Cylinder parmesan rasp, with upper lever and the cylinder body made of "aluminum alloy" treated alimentary.Ventilated motor,...
%
Temperature setting on each tank (+2° to +8°C).Polycarbonate tanks, ABS cover, equipped with metering valve, completely removable for easy maintenance.Rotating pallet system (thus avoiding foam problems).Tropicalized thermal unit (ambient temperature +43°C).Refrigerant evaporator in stainless steel AISI 304.Refrigerant gas R290The device is built in compliance with the current CE standards.