%
"Thermopane" glass door, with stainless steel frame.Included: 3 grids GN 2/1 (530x650 mm).Inner door with warming elements and depression valve.4 adjustable stainless steel feet.Refrigerant gas R290.Interior and exterior made of stainless steel (food grade) AISI 304 (rear galvanized steel), monocoque frameStainless steel racks and slides (antitilt), allowing the grids to be positioned as desired, deep-drawn inner bottom and rounded corners and angles (without rough edges)Glass door (double...
%
Top in stainless steel of 1.5 mm thickness.Multiple spring system.Heating through resistance, adjustable thermostat going form 30°C to 120°C.Submerged control panel, spiral cable 1.5 m.4 swivel castors Ø 125.mm, 2 with brake.Handle and 4 angle shock absorbers, non marking.Manufactured in stainless steel AISI 304, double wall isolation.
%
Stainless steel base AISI 304 18/10.Electric heating, thermostat from 30° to 90°C.
%
%
- Air condenser.- Vertical turbine, ideal for restaurants, requires little maintenance and is very easy to use. - Easy installation due to its compact size. - Minimum mixing capacity 0.5 lit. and maximum 1 lit. - Noise level lower than 70 dB. - Cycle with time control or temperature control. - Vertical evaporator cylinders for a larger exchange surface. - Exclusive distribution device. - System self diagnosis. - Cycle time: 15/20 min. - Hourly production: 5 liters. NB: mainly for cold work.
%
2 compressor groups and 2 evaporators, independent.Included: 2 x 2 grids GN2/1 (530x650 mm).Freezer: inner door fitted with warming resistance, copper coil evaporator, embedded in the walls (3 sides), manual defrost and depression valve, bottom fitted with a draining tap.4 adjustable stainless steel feet.Refrigerant gas R290 Interior and exterior made of stainless steel (food grade) AISI 304 (rear galvanized steel), monocoque frameStainless steel racks and slides (antitilt), allowing the...
%
Oven payload plates GN 2/1 (or GN 1/1).Load capacity 200 Kg.1 transfer cart and 1 detachable loader less than 65 mm "anti-tipping".Core temperature probe.Cart & charger 600x400 EURONORM (on request ref: AC/2P2...)Bottom closing plate integrated in the doorAdjustable stainless steel feetNB: delivered without grids and without GN plates. Inner and outer construction in stainless steel AISI 304, thermal insulation in ceramic fibre, control panel with stainless steel filter, preventing...
%
Oven payload plates GN 2/1 (or GN 1/1).Load capacity 200 Kg.1 transfer cart and 1 detachable loader less than 65 mm "anti-tipping".Core temperature probe.Cart & charger 600x400 EURONORM (on request ref: AC/2P2...)Bottom closing plate integrated in the doorAdjustable stainless steel feetNB: delivered without grids and without GN plates. Inner and outer construction in stainless steel AISI 304, thermal insulation in ceramic fibre, control panel with stainless steel filter, preventing...
%
Capacity 40 levels GN 2/1 (or 80x GN 1/1).Standard 10 pair of slides and 10 plasticized grids GN 2/1. Stainless steel austenitic structure (food).Opening door at 120 °, with a vertical lock with a key code.Hinges with stop at 100 °, closing with automatic recall.Built-in compressor unit (ambient T ° 32 ° C)Refrigerant gas R290Ventilated internal evaporator.Integrated control panel, digital display.Electronic controller with automatic defrost.Possibility of use GN 2/1 or GN 1/1, spaced 60...
%
Oven payload plates GN 2/1 (or GN 1/1).Load capacity 200 Kg.1 transfer cart and 1 detachable loader less than 65 mm "anti-tipping".Core temperature probe.Recessed nozzle with reel.Cart & charger 600x400 EURONORM (on request ref: AC/2P2...)Bottom closing plate integrated in the doorAdjustable stainless steel feetNB: delivered without grids and without GN plates. Inner and outer construction in stainless steel AISI 304, thermal insulation in ceramic fibre, control panel with stainless steel...
%
Oven payload plates GN 2/1 (or GN 1/1).Load capacity 200 Kg.1 transfer cart and 1 detachable loader less than 65 mm "anti-tipping".Core temperature probe.Recessed nozzle with reel.Cart & charger 600x400 EURONORM (on request ref: AC/2P2...)Bottom closing plate integrated in the doorAdjustable stainless steel feetNB: delivered without grids and without GN plates. Inner and outer construction in stainless steel AISI 304, thermal insulation in ceramic fibre, control panel with stainless steel...
%
Internal dimensions 660x420xh825Standard equipment: 1 grid EN 600x4003 "autoreverse" turbines. Welded room in stainless steel (AISI 304). , rounded edges and angles, pressed bottom with draining .Removable carrying-plate structure (75 mm).Chimney for evacuation of the condensate adjustable motorised.Interior lighting.(automatic ignition)Built-in condensate bowl (on the door), connected directly to the discharge.Double glazing door (option: door with hinges on the right), interior window on...
%
Oven payload plates GN 2/1 (or 1/1).Load capacity 200Kg.1 transfer trolley and 1 removable carriage less than 65 mm "anti-tipping".Core temperature probe.NB: delivered without grids and without GN plates. Internal and external construction in AISI 304 stainless steel, thermal insulation in ceramic fibre, control panel equipped with a stainless steel filter, preventing clogging of components (ventilated panel), stainless steel feet. Cooking chamber: fully welded, corners and rounded corners....
%
Oven payload plates GN 2/1 (or 1/1).Load capacity 200Kg.1 transfer trolley and 1 removable carriage less than 65 mm "anti-tipping".Core temperature probe.Structure (Dx & Gx) 600x400 EURONORM (on request ref: AC/SE.....)NB: delivered without grids and without GN plates. Internal and external construction in AISI 304 stainless steel, thermal insulation in ceramic fibre, control panel equipped with a stainless steel filter, preventing clogging of components (ventilated panel), stainless...
%
Oven payload plates GN 2/1 (or GN 1/1).Load capacity 200 Kg.1 transfer cart and 1 detachable loader less than 65 mm "anti-tipping".Core temperature probe.Cart & charger 600x400 EURONORM (on request ref: AC/2P2...)Bottom closing plate integrated in the doorAdjustable stainless steel feetNB: delivered without grids and without GN plates. Internal and external construction in stainless steel AISI 304, thermal insulation in ceramic fibre, control panel with stainless steel filter, preventing...
%
Oven payload plates GN 2/1 (or GN 1/1).Load capacity 200 Kg.1 transfer cart and 1 detachable loader less than 65 mm "anti-tipping".Core temperature probe.Cart & charger 600x400 EURONORM (on request ref: AC/2P2...)Bottom closing plate integrated in the doorAdjustable stainless steel feetNB: delivered without grids and without GN plates. Internal and external construction in stainless steel AISI 304, thermal insulation in ceramic fibre, control panel with stainless steel filter, preventing...
%
%
Manufactured entirely in stainless steel.This machine has been produced for a pasta production with raw materials like farina type 00, adding eggs and/or water and even spinach for green pasta or tomatoes for red pasta.Basically, it allows to mould pasta (capacity of the basin: 2 kg farina), as well as automatic production of pasta (hard semolina) (production 6 kg/h).Knife for automatic cutting of short or long pasta.Adjustable velocity.Standard delivered with 4 matrixes.n° 7 (1,5 mm) for...
%
%
Capacity 4 GN 1/1 Top 1.2 mm and rounded down 50 mm.GN-200 mm bowl with rounded corners and discharge.3-level display case with sliding doors on the serving side and swing doors on the customer side.Lighting and ventilated evaporator in the upper part.CFC-free injected polyurethane insulation.Hermetically sealed unit housed in the lower part.Refrigerant gas R290.Electronic thermostat with digital display, static cooling.Automatic defrosting with condensate drip tray.GASTRONORM bottom cabinet...
%
Capacity 4 GN 1/1 Top 1.2 mm and rounded down 50 mm.GN-200 mm bowl with rounded corners and discharge.3-level display case with sliding doors on the serving side and swing doors on the customer side.Lighting and ventilated evaporator in the upper part.CFC-free injected polyurethane insulation.Hermetically sealed unit housed in the lower part.Refrigerant gas R290.Electronic thermostat with digital display.Automatic defrosting with condensed water collection tray.Open lower cupboard on the...
%
Capacity: 3 GN 1/1 (supplied: 1x GN 1/1 grid)Production per cycle: 12 Kg ( +70° C +3° C) or 8 Kg ( +70° C -18° C)Core probe as standardAnti-tilt" structure in stainless steel wire (removable), spacing for 67 mm platesDoor (non-reversible) with integrated handle (not projecting)Hinges (left) with automatic return (90° locking).Insulation 50 mm thick4 adjustable cylinders.TOUCH SCREEN" controls 5" screen, high definition color touch screen, allowing the user to customize all major functions.4...
%
Capacity 4 GN 1/1 Top 1.2 mm and rounded down 50 mm, deep-drawn 20 mm GN size with rounded corners and discharge.3-level display case with sliding doors on the serving side and swing doors on the customer side.Lighting and ventilated evaporator, housed in the upper part.CFC-free injected polyurethane insulation.Hermetically sealed unit housed in the lower part.Refrigerant gas R290.Electronic thermostat with digital display.Automatic defrosting with condensed water collection tray.GASTRONORM...
%
Capacité 4 GN 1/1 Top supérieur 1,2 mm et arrondi vers le bas 50 mm, embouti de 20 mm de profondeur au dimensions GN avec angles arrondis et décharge.Vitrine à 3 niveaux, portes coulissantes côté service et portillons battants côté client.Eclairage et évaporateur ventilé, logé dans la partie supérieure.Isolation en polyuréthane injectée exempte de CFC.Unité hermétique logé dans la partie inférieure.Gaz réfrigérant R290.Thermostat électronique avec affichage digitale.Dégivrage automatique avec...