%
Top 1.2 mm with rounding downwards 50 mm.Basin GN-200 mm, rounded angles, outlet tube and abundance tube.Manual filling up,except 6 GN 1/1 through electro valve.Electric heating through electric resistances underneath the basin.Manufactured in stainless steel AISI 304 on adjustable feet in PVC.Closed at service side with 2 sliding doors.
%
Top 1.2 mm with rounding downwards 50 mm.Basin GN-200 mm, rounded angles, outlet tube and abundance tube.Manual filling up,except 6 GN 1/1 through electro valve.Electric heating through electric resistances underneath the basin.Manufactured in stainless steel AISI 304 on adjustable feet in PVC.Closed at service side with 2 sliding doors.
%
Delivery with 1 plates in stainless steel and 1 grill 460x340 (Possibility of also receiving grids or plates of 433x333 mm)Grill salamander (0.7 kW). Chamber with rounded corners, in AISI 430 stainless steel, outside in AISI 430 stainless steel.Distance between boards 70 mm.Pipe for the evacuation of the condensate.T° from 50°C to 270°C, 2 motors with fans (2600 rpm), internal lighting.Folding door with double glazing, stainless steel handle, gasket on the counter door "easily removable",...
%
Capacità 3 GN 1/1Top superiore 1,2 mm ed arrotondato verso il basso 50 mm.Tino GN-200 mm, angoli arrotondati, scarico e troppo pieno.Riempimento dell'acqua nel tino manuale.Riscaldamento elettrico per resistenze situate sotto al tino.Regolazione per termostato, t° di 30°C a 90°C.Protezione per termostato di sicurezza.Armadio inferiore aperto lato servizioRealizzazione in acciaio inossidabile AISI 304 salita su piedi regolabili.N.B.: consegnato senza bac gastronorm.
%
Top 1.2 mm with rounding downwards 50 mm.Basin GN-200 mm,rounded angles, outlet tube and abundance tube.Manual filling up,except 6 GN 1/1 through electro valve.Electric heating through electric resistances underneath the basin. Manufactured in stainless steel AISI 304 on adjustable feet in PVC.
%
Production 60 pieces/hour (cooking time 1 minute).Enameled cast-iron plate.Armoured spiral shaped elements made of stainless steel, treated "incoloy".Thermostatic regulation from 0° t0 300°C, control warning light.Standard delivered with wooden scrapper.Stainless steel frame.Equipment is manufactured following the (CE) standards in force.
%
Supplied with 1 grid 600x400 mm.2 "autoreverse" turbines Chamber with rounded corners.Easily removable" counter-door seal.Easily removable plate-holder structure (75 mm).Deep-drawn bottom collects condensation for discharge.Easily removable deflectors. Condensate drain.Motor(s) with "autoreverse" turbine(s) (2800 rpm) guarantee even heat distribution.Double-glazed athermic door (4 mm), hinged intermediate pane for easy maintenance. Ergonomic athermic handle, self-closing. Micro-switch to stop...
%
"Thermopane" glass door, with stainless steel frame.Included: 3 grids GN 2/1 (530x650 mm).Inner door with warming elements and depression valve.4 adjustable stainless steel feet.Refrigerant gas R290.Interior and exterior made of stainless steel (food grade) AISI 304 (rear galvanized steel), monocoque frameStainless steel racks and slides (antitilt), allowing the grids to be positioned as desired, deep-drawn inner bottom and rounded corners and angles (without rough edges)Glass door (double...
%
Stainless steel base AISI 304 18/10.Electric heating, thermostat from 30° to 90°C.
%
Top in stainless steel of 1.5 mm thickness.Multiple spring system.Heating through resistance, adjustable thermostat going form 30°C to 120°C.Submerged control panel, spiral cable 1.5 m.4 swivel castors Ø 125.mm, 2 with brake.Handle and 4 angle shock absorbers, non marking.Manufactured in stainless steel AISI 304, double wall isolation.
%
3 Filters ANTI-FAT labyrinths (2x 400x500 & 1x 500x500 mm) Model with built-in centrifugal fan "watertight" (IP55) (central position, in vertical).Designed in stainless steel AISI 441, assembly by points welding.Filters anti-fat has stainless steel labyrinths AISI 430.Peripheral channel for the fat collection, fitted with a drainage tap.Built-in lighting (LED) waterproof (IP65), high temperature.Speed regulator built-in the frontal.
%
- Air condenser.- Vertical turbine, ideal for restaurants, requires little maintenance and is very easy to use. - Easy installation due to its compact size. - Minimum mixing capacity 0.5 lit. and maximum 1 lit. - Noise level lower than 70 dB. - Cycle with time control or temperature control. - Vertical evaporator cylinders for a larger exchange surface. - Exclusive distribution device. - System self diagnosis. - Cycle time: 15/20 min. - Hourly production: 5 liters. NB: mainly for cold work.
%
2 compressor groups and 2 evaporators, independent.Included: 2 x 2 grids GN2/1 (530x650 mm).Freezer: inner door fitted with warming resistance, copper coil evaporator, embedded in the walls (3 sides), manual defrost and depression valve, bottom fitted with a draining tap.4 adjustable stainless steel feet.Refrigerant gas R290 Interior and exterior made of stainless steel (food grade) AISI 304 (rear galvanized steel), monocoque frameStainless steel racks and slides (antitilt), allowing the...
%
Capacity 40 GN 2/1 levels (or 80x GN 1/1).SPECIAL BANQUETING: Standard 20 grids to optimize space inside the trollley.Up to eight (8) plates with a diameter of 300 mm can be stored per level, for a total of 160 plates. Construction in austenitic stainless steel (food).Walls and door made of double injected prey (high density CFC-free polyurethane).Door opening at 120°, with vertical latch and key lock, with a seal in the door frame, easily replaceable without tools.Hinges with stop at 100°,...
%
Capacity 40 levels GN 2/1 (or 80x GN 1/1).Standard 10 pair of slides and 10 plasticized grids GN 2/1. Stainless steel austenitic structure (food).Opening door at 120 °, with a vertical lock with a key code.Hinges with stop at 100 °, closing with automatic recall.Built-in compressor unit (ambient T ° 32 ° C)Refrigerant gas R290Ventilated internal evaporator.Integrated control panel, digital display.Electronic controller with automatic defrost.Possibility of use GN 2/1 or GN 1/1, spaced 60...
%
%
Internal dimensions 660x420xh825Standard equipment: 1 grid EN 600x4003 "autoreverse" turbines. Welded room in stainless steel (AISI 304). , rounded edges and angles, pressed bottom with draining .Removable carrying-plate structure (75 mm).Chimney for evacuation of the condensate adjustable motorised.Interior lighting.(automatic ignition)Built-in condensate bowl (on the door), connected directly to the discharge.Double glazing door (option: door with hinges on the right), interior window on...
%
%
Frame in stainless steel, all the parts that are in contact with the dough are also in stainless steel.Adjustement of the thickness from the sheet.Warning device to protect the roller.
%
Version with 2 motors.Standard 2 speeds.Turns per minute: 1400/2800 rpm.Tank capacity: 14,5 LtUseful tank capacity: 8,2 LtMade of stainless steel.AISI 304 stainless steel tank, thermo-diffuser bottom, transportable tank equipped with handles, easy to empty and clean.Ventilated motor, (for intensive use) (switchable 400V & 230V/3).No heat transmission on the product (motor and tank are side by side).Very sturdy knife (standard 1 smooth knife), with curved blades in hardened "cutlery"...
%
%
Delivery with 1 plates in stainless steel and 1 grill 460x340 (Possibility of also receiving grids or plates of 433x333 mm)Grill salamander (0.7 kW). Chamber with rounded corners, in AISI 430 stainless steel, outside in AISI 430 stainless steel.Distance between boards 70 mm.Pipe for the evacuation of the condensate.T° from 50°C to 270°C, 2 motors with fans (2600 rpm), internal lighting.Folding door with double glazing, stainless steel handle, gasket on the counter door "easily removable",...
%
Supplied with 1 grid 600x400 mm.2 "autoreverse" turbines Chamber with rounded corners.Easily removable" counter-door seal.Easily removable plate-holder structure (75 mm).Deep-drawn bottom collects condensation for discharge.Easily removable deflectors. Condensate drain.Motor(s) with "autoreverse" turbine(s) (2800 rpm) guarantee even heat distribution.Double-glazed athermic door (4 mm), hinged intermediate pane for easy maintenance. Ergonomic athermic handle, self-closing. Micro-switch to stop...
%
Manufactured entirely in stainless steel.This machine has been produced for a pasta production with raw materials like farina type 00, adding eggs and/or water and even spinach for green pasta or tomatoes for red pasta.Basically, it allows to mould pasta (capacity of the basin: 2 kg farina), as well as automatic production of pasta (hard semolina) (production 6 kg/h).Knife for automatic cutting of short or long pasta.Adjustable velocity.Standard delivered with 4 matrixes.n° 7 (1,5 mm) for...