%
Included: 20 pairs of runners (600 x 800 mm).Inner door with heating resistance and under-pressure valve.4 adjustable stainless steel feet.Cooling gas R134.Interior and exterior made of (food) stainless steel AISI 304 (back made of galvanized steel), monocoque frame.Racks and rails in stainless steel (maximal capacity 27 slides, 50-mm spacing), which help to position the trays as one pleases, stamped inside bottom, with drain plug (major maintenance) and rounded angles and corners (without...
%
"Thermopane" glass door, with stainless steel frame.Included: 3 grids GN 2/1 (530x650 mm).Inner door with warming elements and depression valve.4 adjustable stainless steel feet.Refrigerant gas R290.Interior and exterior made of stainless steel (food grade) AISI 304 (rear galvanized steel), monocoque frameStainless steel racks and slides (antitilt), allowing the grids to be positioned as desired, deep-drawn inner bottom and rounded corners and angles (without rough edges)Glass door (double...
%
Included: 3 grids GN 2/1 (530x650 mm) by door.Inner door with warm resistance.Depression valve delivered standard.4 adjustable stainless steel feet.Refrigerant gas R290.Interior and exterior made of stainless steel (food grade) AISI 304 (rear galvanized steel), monocoque frameStainless steel racks and slides (antitilt), allowing the grids to be positioned as desired, deep-drawn inner bottom and rounded corners and angles (without rough edges)Doors with ergonomic (not protruding) and...
%
Top in stainless steel of 1.5 mm thickness.Multiple spring system.Heating through resistance, adjustable thermostat going form 30°C to 120°C.Submerged control panel, spiral cable 1.5 m.4 swivel castors Ø 125.mm, 2 with brake.Handle and 4 angle shock absorbers, non marking.Manufactured in stainless steel AISI 304, double wall isolation.
%
Stainless steel base AISI 304 18/10.Electric heating, thermostat from 30° to 90°C.
%
%
- Air condenser.- Vertical turbine, ideal for restaurants, requires little maintenance and is very easy to use. - Easy installation due to its compact size. - Minimum mixing capacity 0.5 lit. and maximum 1 lit. - Noise level lower than 70 dB. - Cycle with time control or temperature control. - Vertical evaporator cylinders for a larger exchange surface. - Exclusive distribution device. - System self diagnosis. - Cycle time: 15/20 min. - Hourly production: 5 liters. NB: mainly for cold work.
%
2 compressor groups and 2 evaporators, independent.Included: 2 x 2 grids GN2/1 (530x650 mm).Freezer: inner door fitted with warming resistance, copper coil evaporator, embedded in the walls (3 sides), manual defrost and depression valve, bottom fitted with a draining tap.4 adjustable stainless steel feet.Refrigerant gas R290 Interior and exterior made of stainless steel (food grade) AISI 304 (rear galvanized steel), monocoque frameStainless steel racks and slides (antitilt), allowing the...
%
Production 3600/800 pieces/hour.Round portions 20 to 1000 gr.Outside realization made of stainless steel.Lid with micro switch.Endless screw made in food aluminium.24V low voltage control panel.Emergency stop switch.Dismountable for an easier mantenance.4 wheels of witch 2 with brakes, easyer transport.
%
Capacity 40 levels GN 2/1 (or 80x GN 1/1).Standard 10 pair of slides and 10 plasticized grids GN 2/1. Stainless steel austenitic structure (food).Opening door at 120 °, with a vertical lock with a key code.Hinges with stop at 100 °, closing with automatic recall.Built-in compressor unit (ambient T ° 32 ° C)Refrigerant gas R290Ventilated internal evaporator.Integrated control panel, digital display.Electronic controller with automatic defrost.Possibility of use GN 2/1 or GN 1/1, spaced 60...
%
Internal dimensions 660x420xh825Standard equipment: 1 grid EN 600x4003 "autoreverse" turbines. Welded room in stainless steel (AISI 304). , rounded edges and angles, pressed bottom with draining .Removable carrying-plate structure (75 mm).Chimney for evacuation of the condensate adjustable motorised.Interior lighting.(automatic ignition)Built-in condensate bowl (on the door), connected directly to the discharge.Double glazing door (option: door with hinges on the right), interior window on...
%
%
Manufactured entirely in stainless steel.This machine has been produced for a pasta production with raw materials like farina type 00, adding eggs and/or water and even spinach for green pasta or tomatoes for red pasta.Basically, it allows to mould pasta (capacity of the basin: 2 kg farina), as well as automatic production of pasta (hard semolina) (production 6 kg/h).Knife for automatic cutting of short or long pasta.Adjustable velocity.Standard delivered with 4 matrixes.n° 7 (1,5 mm) for...
%
%
Professional machine designed to wipe and polish cutlery taken out of the dishwasher.Ideally designed for large and medium sized hotel or community activities.Productivity 130 covers per minute.Made of stainless steel.Support on wheels, 2 of which have brakes.Molded ABS tank.Quantity of ecological granules in tank 8.5 kg.Foldable" holder for standard receiving tray.With UV lamp as standard, for sterilizing cutlery.Hot air fan at "end of stroke".Supplied with 8.5 kg of vegetable aggregate and...
%
Capacity 4 GN 1/1 Top 1.2 mm and rounded down 50 mm.GN-200 mm bowl with rounded corners and discharge.3-level display case with sliding doors on the serving side and swing doors on the customer side.Lighting and ventilated evaporator in the upper part.CFC-free injected polyurethane insulation.Hermetically sealed unit housed in the lower part.Refrigerant gas R290.Electronic thermostat with digital display, static cooling.Automatic defrosting with condensate drip tray.GASTRONORM bottom cabinet...
%
Capacity 4 GN 1/1 Top 1.2 mm and rounded down 50 mm.GN-200 mm bowl with rounded corners and discharge.3-level display case with sliding doors on the serving side and swing doors on the customer side.Lighting and ventilated evaporator in the upper part.CFC-free injected polyurethane insulation.Hermetically sealed unit housed in the lower part.Refrigerant gas R290.Electronic thermostat with digital display.Automatic defrosting with condensed water collection tray.Open lower cupboard on the...
%
Capacity: 3 GN 1/1 (supplied: 1x GN 1/1 grid)Production per cycle: 12 Kg ( +70° C +3° C) or 8 Kg ( +70° C -18° C)Core probe as standardAnti-tilt" structure in stainless steel wire (removable), spacing for 67 mm platesDoor (non-reversible) with integrated handle (not projecting)Hinges (left) with automatic return (90° locking).Insulation 50 mm thick4 adjustable cylinders.TOUCH SCREEN" controls 5" screen, high definition color touch screen, allowing the user to customize all major functions.4...
%
Capacity 4 GN 1/1 Top 1.2 mm and rounded down 50 mm, deep-drawn 20 mm GN size with rounded corners and discharge.3-level display case with sliding doors on the serving side and swing doors on the customer side.Lighting and ventilated evaporator, housed in the upper part.CFC-free injected polyurethane insulation.Hermetically sealed unit housed in the lower part.Refrigerant gas R290.Electronic thermostat with digital display.Automatic defrosting with condensed water collection tray.GASTRONORM...
%
Capacité 4 GN 1/1 Top supérieur 1,2 mm et arrondi vers le bas 50 mm, embouti de 20 mm de profondeur au dimensions GN avec angles arrondis et décharge.Vitrine à 3 niveaux, portes coulissantes côté service et portillons battants côté client.Eclairage et évaporateur ventilé, logé dans la partie supérieure.Isolation en polyuréthane injectée exempte de CFC.Unité hermétique logé dans la partie inférieure.Gaz réfrigérant R290.Thermostat électronique avec affichage digitale.Dégivrage automatique avec...
%
Capacity: 5x GN 1/1 (or) 5 x EN 600X400 (grids and plates optional).Production per cycle: 20 Kg (+70° C +3° C) or 12 Kg (+70° C -18°C).Core probe as standard.Anti-tilting" structure in stainless steel wire (removable), spacing for GN 1/1 (70 mm) & EN 600x400 (44 mm) plates.Door with integrated "non protruding" handle (On order reversible)Hinges with automatic return (90° locking).Insulation 60 mm thickness.Refrigerant expansion R404A by thermostatic expansion valve.4 adjustable stainless...
%
Capacity: 5x GN 1/1 (or) 5 x EN 600 X 400 (optional grills and plates).Prodution per cycle : 20 Kg (+70° C +3° C) or 12 Kg (+70° C -18° C).Core probe, serial."Anti tilt" Structure made of stainless steel wire (removable), space for trays GN 1/1 (70 mm) & EN 600x400 ( 44 mm).Door with integrated "non-projecting" handle (reversible on order).Top panel for access to the compressor unit, on hinges, easy inspection.Hinges with automatic return (blocking at 90 °).Insulation 60 mm...
%
Superior top 1.5 mm, rounded edges 70 mm.Tank GN 200 mm rounded corners and drainage.Made in stainless steel AISI 304 with adjustable feet in stainless steel 150 mm.Built in hermetic compressor.Drip tray for condensation under unit.Refrigerant gas R290.Refrigerated cupboard GASTRONORM with rounded corners.
%
Superior top 1.5mm, rounded edges 70 mm.Tank GN 200 mm rounded corners and drainage.Made in stainless steel AISI 304 with adjustable feet in stainless steel 150 mm.Built in hermetic compressor.Refrigerant gas R290.Drip tray for condensation under unit.