%
- Equipped with an aspiration system for the evacuation of the evaporation of the residual humidity. - Casing of the roll in Nomex, chromium-plated steel tank. - Control panel "Touch Screen" (4.3").- Function display, multilingual. - 30 memory programs (re-programmable).- "Automatic " regulation of the speed and temperature. - Cooling device of the cylinder "Cool Down". - Variable speed of the ironing. - Finger-shield and emergency stop button, "Hot shot" kind. - Delivered standard with lower...
%
Frame in galvanized steel.Soundproof isolation.
%
Frame in galvanized steel.Soundproof isolation.
%
Included: 3 grids GN 2/1 (530x650 mm).4 adjustable stainless steel feet.Refrigerant gas R290.Interior and exterior made of stainless steel (food grade) AISI 304 (rear galvanized steel), monocoque frameStainless steel racks and slides (antitilt), allowing the grids to be positioned as desired, deep-drawn inner bottom and rounded corners and angles (without rough edges)Doors with ergonomic (not protruding) and reversible handle, closing by "triple chamber" and magnetic seal (easy replacement,...
%
"Thermopane" glass door, with stainless steel frame.Included: 3 grids GN 2/1 (530x650 mm).Inner door with warming elements and depression valve.4 adjustable stainless steel feet.Refrigerant gas R290.Interior and exterior made of stainless steel (food grade) AISI 304 (rear galvanized steel), monocoque frameStainless steel racks and slides (antitilt), allowing the grids to be positioned as desired, deep-drawn inner bottom and rounded corners and angles (without rough edges)Glass door (double...
%
Top in stainless steel of 1.5 mm thickness.Multiple spring system.Heating through resistance, adjustable thermostat going form 30°C to 120°C.Submerged control panel, spiral cable 1.5 m.4 swivel castors Ø 125.mm, 2 with brake.Handle and 4 angle shock absorbers, non marking.Manufactured in stainless steel AISI 304, double wall isolation.
%
Stainless steel base AISI 304 18/10.Electric heating, thermostat from 30° to 90°C.
%
%
- Air condenser.- Vertical turbine, ideal for restaurants, requires little maintenance and is very easy to use. - Easy installation due to its compact size. - Minimum mixing capacity 0.5 lit. and maximum 1 lit. - Noise level lower than 70 dB. - Cycle with time control or temperature control. - Vertical evaporator cylinders for a larger exchange surface. - Exclusive distribution device. - System self diagnosis. - Cycle time: 15/20 min. - Hourly production: 5 liters. NB: mainly for cold work.
%
Variable speed (Min. 53 rpm & Max. 517 rpm), with Inverter.Timer from 0 to 30 minutes or continuousStandard accessories: whisk, spatula, hook and 10 L stainless steel tank.Table versions.Frame in painted steel (epoxy), upper cover in ABS, 4 lower cylinders for levelling.Fixed tank, automatic locking in working position.Protective plexiglass with safety device by microswitch.All parts in contact with the tank are made of stainless steel.Easy insertion and removal of utensils.When the...
%
%
2 compressor groups and 2 evaporators, independent.Included: 2 x 2 grids GN2/1 (530x650 mm).Freezer: inner door fitted with warming resistance, copper coil evaporator, embedded in the walls (3 sides), manual defrost and depression valve, bottom fitted with a draining tap.4 adjustable stainless steel feet.Refrigerant gas R290 Interior and exterior made of stainless steel (food grade) AISI 304 (rear galvanized steel), monocoque frameStainless steel racks and slides (antitilt), allowing the...
%
Production 3600/1000 pieces/hour.Round portions 20 to 300 gr.Outside realization made of steel "epoxy painting".Lid with micro switch.Endless screw made in food aluminium.24 V low voltage control panel.Emergency stop switch.Dismountable for an easier mantenance.2 back wheels for an easyer transport.
%
Mechanical controls, mats manipulated by joystick.Table version (very compact), 4 adjustable cylinders.Manual controlsVariable speed (10 rpm to 60 rpm), with Inverter.Side tables 1000x500 mm (foldable)Cylinder length 500 mmRoll opening 0 - 36 mm, rolling diameter 60 mmTravel speed 35 metres/minuteClosed overall dimensions 380x920xh1240.Standard: Harvesting bins under the mats, 2 harvesting terminals and 2 pastry rollers.Strips made with specific materials for food use.Precise regulation of...
%
Mechanical controls, mats manipulated by joystick.Table version (very compact), 4 adjustable cylinders.Manual controls.1 speed.Side tables 1000x500 mm (foldable).Cylinder length 500 mm.Roll opening from 0 - 36 mm, rolling diameter 60 mm.Travel speed 35 metres/minute.Closed overall dimensions 380x920xh1240.Standard: Harvesting bins under the mats, 2 harvesting terminals and 2 pastry rollers.Strips made with specific materials for food use.Precise regulation of the thickness of the dough sheet,...
%
Mechanical controls, mats manipulated by joystick.Table version (very compact), 4 adjustable cylinders.Manual controlsVariable speed (10 rpm to 60 rpm), with Inverter.Side tables 700x500 mm (foldable)Cylinder length 500 mmRoll opening 0 - 36 mm, rolling diameter 60 mmTravel speed 35 metres/minuteClosed overall dimensions 380x920xh850.Standard: 2 pastry rollers.Strips made with specific materials for food use.Precise regulation of the thickness of the dough sheet, constant production.Scrapers...
%
Mechanical controls, mats manipulated by joystick.Table version (very compact), 4 adjustable cylinders.Manual controls.1 speed.Side tables 700x500 mm (foldable).Cylinder length 500 mm.Roll opening from 0 - 36 mm, rolling diameter 60 mm.Travel speed 35 metres/minute.Closed overall dimensions 380x920xh850.Standard: 2 pastry rollers.Strips made with specific materials for food use.Precise regulation of the thickness of the dough sheet, constant production.Scrapers and supports made with specific...
%
Mechanical controls, mats manipulated by joystick.Base mounted version, 4 wheels, 2 fixed, 2 swivel wheels with brakes.Manual and pedal controls.Variable speed (10 rpm to 60 rpm), with Inverter.Side tables 1000x500 mm (foldable)Cylinder length 500 mmRoll opening from 0 - 36 mm, rolling diameter 60 mm.Travel speed 35 metres/minuteClosed overall dimensions 580x920xh1940Standard: 2 stainless steel harvesting terminals, 2 pastry rollers.Strips made with specific materials for food use.Precise...
%
Mechanical controls, mats manipulated by joystick.Base mounted version, 4 wheels, 2 fixed, 2 swivel wheels with brakes.Manual and pedal controls.1 speedSide tables 1000x500 mm (foldable)Cylinder length 500 mmRoll opening from 0 - 36 mm, rolling diameter 60 mm.Travel speed 35 metres/minuteClosed overall dimensions 580x920xh1940Standard: 2 stainless steel harvesting terminals, 2 pastry rollers.Strips made with specific materials for food use.Precise regulation of the thickness of the dough...
%
Included: 20 pairs of slides (400x600 mm).Inner door with warming element and depression valve.4 adjustable stainless steel feet.Cooling gas R290.Manufactured in stainless steel AISI 304, inside and outside (back in galvanized steel), monocoque frame.Stainless steel racks and slides (anti-tilting), allowing to place the plates as one pleases, stamped interior bottom, rounded angles and corners (without roughness).Doors with ergonomic handle (no salient) and reversible, closed by magnetic seal...
%
Capacity 40 levels GN 2/1 (or 80x GN 1/1).Standard 10 pair of slides and 10 plasticized grids GN 2/1. Stainless steel austenitic structure (food).Opening door at 120 °, with a vertical lock with a key code.Hinges with stop at 100 °, closing with automatic recall.Built-in compressor unit (ambient T ° 32 ° C)Refrigerant gas R290Ventilated internal evaporator.Integrated control panel, digital display.Electronic controller with automatic defrost.Possibility of use GN 2/1 or GN 1/1, spaced 60...
%
Internal dimensions 660x420xh825Standard equipment: 1 grid EN 600x4003 "autoreverse" turbines. Welded room in stainless steel (AISI 304). , rounded edges and angles, pressed bottom with draining .Removable carrying-plate structure (75 mm).Chimney for evacuation of the condensate adjustable motorised.Interior lighting.(automatic ignition)Built-in condensate bowl (on the door), connected directly to the discharge.Double glazing door (option: door with hinges on the right), interior window on...
%
%
Manufactured entirely in stainless steel.This machine has been produced for a pasta production with raw materials like farina type 00, adding eggs and/or water and even spinach for green pasta or tomatoes for red pasta.Basically, it allows to mould pasta (capacity of the basin: 2 kg farina), as well as automatic production of pasta (hard semolina) (production 6 kg/h).Knife for automatic cutting of short or long pasta.Adjustable velocity.Standard delivered with 4 matrixes.n° 7 (1,5 mm) for...