%
Temperature: -2° -14°C- Manufactured in solid wood.- Plexiglas dome.- Stainless steel AISI 304 display area.- Built-in airtight unit (ambient t° +32°C).- Static evaporator treated against the "coating" acids and the salts. - Refrigerant R134A.- Frame on castors.- Manual defrosting.NB: for the temperature update, this trolley needs to be connected on an electric network +/- 2 hours in advance ; then store the ice cream which might be at its service temperature (-14°C), this trolley isn't...
%
"Thermopane" glass door, with stainless steel frame.Included: 3 grids GN 2/1 (530x650 mm).Inner door with warming elements and depression valve.4 adjustable stainless steel feet.Refrigerant gas R290.Interior and exterior made of stainless steel (food grade) AISI 304 (rear galvanized steel), monocoque frameStainless steel racks and slides (antitilt), allowing the grids to be positioned as desired, deep-drawn inner bottom and rounded corners and angles (without rough edges)Glass door (double...
%
Stainless steel base AISI 304 18/10.Electric heating, thermostat from 30° to 90°C.
%
Top in stainless steel of 1.5 mm thickness.Multiple spring system.Heating through resistance, adjustable thermostat going form 30°C to 120°C.Submerged control panel, spiral cable 1.5 m.4 swivel castors Ø 125.mm, 2 with brake.Handle and 4 angle shock absorbers, non marking.Manufactured in stainless steel AISI 304, double wall isolation.
%
1 chamber: 830x1260xh180mm.Capacity: 4x 600x400 mm. Stackable oven modules, designed for medium productivity.External construction in AISI 304 stainless steel.The floor of the furnace is made of thermo diffusing steel.Height of the baking vault 180 mm.Ideally suited for baking on platters.Mould made of AISI 430 stainless steel.Heating by shielded resistors on the vault as well as under the floor of the oven.Oven door with stainless steel handle, equipped with a large safety glass.Oura for...
%
- Air condenser.- Vertical turbine, ideal for restaurants, requires little maintenance and is very easy to use. - Easy installation due to its compact size. - Minimum mixing capacity 0.5 lit. and maximum 1 lit. - Noise level lower than 70 dB. - Cycle with time control or temperature control. - Vertical evaporator cylinders for a larger exchange surface. - Exclusive distribution device. - System self diagnosis. - Cycle time: 15/20 min. - Hourly production: 5 liters. NB: mainly for cold work.
%
2 compressor groups and 2 evaporators, independent.Included: 2 x 2 grids GN2/1 (530x650 mm).Freezer: inner door fitted with warming resistance, copper coil evaporator, embedded in the walls (3 sides), manual defrost and depression valve, bottom fitted with a draining tap.4 adjustable stainless steel feet.Refrigerant gas R290 Interior and exterior made of stainless steel (food grade) AISI 304 (rear galvanized steel), monocoque frameStainless steel racks and slides (antitilt), allowing the...
%
Turns/minute: 15000 rpm.On/Off switch, stainless steel screws.. ABS molded body, inner stainless steel and aluminium structure, polished aluminium hopper, 2 liters receiving receptacle en ABS molded.. Fitted with safety microswitch on hopper lever and receiving receptacle, fitted with thermal motor relay.. Sturdy belt-driven transmission, minimal power loss.. The equipment is manufactured following the (CE) standards in force.
%
Compact, but with a large cutting capacity, realized in anodized and polished aluminum alloy.Sanitary polished and anodized aluminium alloy, hardened, chromed stainless blade, permanent tapered blade ring guard and interlocked blade guard (100% safe).Reinforced gauge plate, max. cutting capacity 250xh185 (Ø 210 mm) slice thickness 0-13 mm.Carriage sliding on stainless bearings for an easy and quiet operation, a plexiglass hand guard comes standard.Stainless steel screws and...
%
Compact machine but with an important cutting capacity.Hardened, chrome-plated and ground steel blade (Ø 300 mm), fixed protection ring and blade cover with microswitch (100% safety).Sliding of the carriage on self-lubricating bushings and ground pins.Stainless steel screws.Built-in aluminium sharpener with 2 emery wheels. On/off switch, protection class IP 44.Ventilated motor, lower protection, with direct access to the electrical elements, sealing ring on the transmission pulley,...
%
Gravity feed, 38° inclination.Max. cutting capacity 230xh175 (Ø 200 mm), slice thickness 0-30 mm.41 mm gap between blade and body. Stylish and performing, sanitary polished and anodized aluminium alloy, hardened, chromed stainless blade, permanent tapered blade ring guard and interlocked blade guard (100% safe).Reinforced gauge plate, removable slider guard.Carriage sliding on stainless bearings for an easy and quiet operation, polished, chromed and hardened sliding bar, vulcanized rubber...
%
Version with vertical blade.Double-feed carriage with a clamping arm holding firmly in place all cold meats.Cutting capacity 275 mm, plate 275xh260 mm.Cutting thickness 0-30 mm. Rounded design, no corners and sharp edges and no visible screws.Blade (Ø 300 mm) made of hardened steel, chrome and improved, tapered blade ring guard and interlocked blade guard (100% safe).Ashes of the cutting carriage in chrome, improved and polished.Carriage sliding on stainless bearings for an easy and quiet...
%
Capacity 40 levels GN 2/1 (or 80x GN 1/1).Standard 10 pair of slides and 10 plasticized grids GN 2/1. Stainless steel austenitic structure (food).Opening door at 120 °, with a vertical lock with a key code.Hinges with stop at 100 °, closing with automatic recall.Built-in compressor unit (ambient T ° 32 ° C)Refrigerant gas R290Ventilated internal evaporator.Integrated control panel, digital display.Electronic controller with automatic defrost.Possibility of use GN 2/1 or GN 1/1, spaced 60...
%
Internal dimensions 660x420xh825Standard equipment: 1 grid EN 600x4003 "autoreverse" turbines. Welded room in stainless steel (AISI 304). , rounded edges and angles, pressed bottom with draining .Removable carrying-plate structure (75 mm).Chimney for evacuation of the condensate adjustable motorised.Interior lighting.(automatic ignition)Built-in condensate bowl (on the door), connected directly to the discharge.Double glazing door (option: door with hinges on the right), interior window on...
%
%
Turns per minute: 2600 rpm.Tank capacity: 3,3 Lt.Useful tank capacity: 1,5 Lt. Made of stainless steel AISI 304.18/10 stainless steel tank, thermo-diffuser bottom, transportable tank equipped with handles, easy to empty and wash.Ventilated motor, (for intensive use).No heat transmission on the product (motor and tank are side by side).Very sturdy knife (standard 1 smooth knife), with curved blades in hardened "cutlery" steel.High safety guaranteed by a double micro-switch on the lid.Lid in...
%
Standard with speed drive.Turns per minute: 1100/2600 rpm.Tank capacity: 5,3 LtUseful tank capacity: 3,1 Lt Made of stainless steel AISI 304.18/10 stainless steel tank, thermo-diffuser bottom, transportable tank equipped with handles, easy to empty and wash.Ventilated motor, (for intensive use).No heat transmission on the product (motor and tank are side by side).Very sturdy knife (standard 1 smooth knife), with curved blades in hardened "cutlery" steel.High safety guaranteed by a double...
%
Manufactured entirely in stainless steel.This machine has been produced for a pasta production with raw materials like farina type 00, adding eggs and/or water and even spinach for green pasta or tomatoes for red pasta.Basically, it allows to mould pasta (capacity of the basin: 2 kg farina), as well as automatic production of pasta (hard semolina) (production 6 kg/h).Knife for automatic cutting of short or long pasta.Adjustable velocity.Standard delivered with 4 matrixes.n° 7 (1,5 mm) for...
%
%
%
- Turns/minute: rpm 145.- Duration of the production cycle 90-120 sec.- Color BLACK.- Stainless steel undercarriage AISI 304.- Stainless steel tank AISI 304, 100% hygienic, without rough part and rounded edges. - Plexiglas see-through lid allowing a field of vision of the production, safety DIP switch.- Abrasive turning trays and walls also fitted with an abrasive tape (both are easily transportable for the cleaning, the operations don't require any specialized labor). - Digital control panel...
%
- Turns/minute : rpm 180.- Duration of the production cycle 120-150 sec.- Color BLACK.- Stainless steel undercarriage AISI 304.- Stainless steel tank AISI 304, 100% hygienic, without rough part and rounded edges. - Plexiglas see-through lid allowing a field of vision of the production, safety DIP switch.- Abrasive turning trays and walls also fitted with an abrasive tape (both are easily transportable for the cleaning, the operations don't require any specialized labor). - Digital control...
%
Capacity 4 GN 1/1 Top 1.2 mm and rounded down 50 mm.GN-200 mm bowl with rounded corners and discharge.3-level display case with sliding doors on the serving side and swing doors on the customer side.Lighting and ventilated evaporator in the upper part.CFC-free injected polyurethane insulation.Hermetically sealed unit housed in the lower part.Refrigerant gas R290.Electronic thermostat with digital display, static cooling.Automatic defrosting with condensate drip tray.GASTRONORM bottom cabinet...
%
Capacity 4 GN 1/1 Top 1.2 mm and rounded down 50 mm.GN-200 mm bowl with rounded corners and discharge.3-level display case with sliding doors on the serving side and swing doors on the customer side.Lighting and ventilated evaporator in the upper part.CFC-free injected polyurethane insulation.Hermetically sealed unit housed in the lower part.Refrigerant gas R290.Electronic thermostat with digital display.Automatic defrosting with condensed water collection tray.Open lower cupboard on the...