%
Top 1.2 mm with rounding downwards 50 mm.Basin GN-200 mm, rounded angles, outlet tube and abundance tube.Manual filling up,except 6 GN 1/1 through electro valve.Electric heating through electric resistances underneath the basin.Manufactured in stainless steel AISI 304 on adjustable feet in PVC.Closed at service side with 2 sliding doors.
%
Top 1.2 mm with rounding downwards 50 mm.Basin GN-200 mm, rounded angles, outlet tube and abundance tube.Manual filling up,except 6 GN 1/1 through electro valve.Electric heating through electric resistances underneath the basin.Manufactured in stainless steel AISI 304 on adjustable feet in PVC.Closed at service side with 2 sliding doors.
%
%
Delivery with 1 plates in stainless steel and 1 grill 460x340 (Possibility of also receiving grids or plates of 433x333 mm)Grill salamander (0.7 kW). Chamber with rounded corners, in AISI 430 stainless steel, outside in AISI 430 stainless steel.Distance between boards 70 mm.Pipe for the evacuation of the condensate.T° from 50°C to 270°C, 2 motors with fans (2600 rpm), internal lighting.Folding door with double glazing, stainless steel handle, gasket on the counter door "easily removable",...
%
Capacità 3 GN 1/1Top superiore 1,2 mm ed arrotondato verso il basso 50 mm.Tino GN-200 mm, angoli arrotondati, scarico e troppo pieno.Riempimento dell'acqua nel tino manuale.Riscaldamento elettrico per resistenze situate sotto al tino.Regolazione per termostato, t° di 30°C a 90°C.Protezione per termostato di sicurezza.Armadio inferiore aperto lato servizioRealizzazione in acciaio inossidabile AISI 304 salita su piedi regolabili.N.B.: consegnato senza bac gastronorm.
%
Top 1.2 mm with rounding downwards 50 mm.Basin GN-200 mm,rounded angles, outlet tube and abundance tube.Manual filling up,except 6 GN 1/1 through electro valve.Electric heating through electric resistances underneath the basin. Manufactured in stainless steel AISI 304 on adjustable feet in PVC.
%
Production 60 pieces/hour (cooking time 1 minute).Enameled cast-iron plate.Armoured spiral shaped elements made of stainless steel, treated "incoloy".Thermostatic regulation from 0° t0 300°C, control warning light.Standard delivered with wooden scrapper.Stainless steel frame.Equipment is manufactured following the (CE) standards in force.
%
Supplied with 1 grid 600x400 mm.2 "autoreverse" turbines Chamber with rounded corners.Easily removable" counter-door seal.Easily removable plate-holder structure (75 mm).Deep-drawn bottom collects condensation for discharge.Easily removable deflectors. Condensate drain.Motor(s) with "autoreverse" turbine(s) (2800 rpm) guarantee even heat distribution.Double-glazed athermic door (4 mm), hinged intermediate pane for easy maintenance. Ergonomic athermic handle, self-closing. Micro-switch to stop...
%
Schedule production: 150 liters. Production of whipped cream and mousses with high overrun.Keeps the cream in perfect conditions preventing phase of separation.Consistent refrigeration from the container to the dispensing head.Allows interruption of production at anytime.Removable tank made of stainless steel, maintains easy and perfect hygiene.Standard: Labyrinth stem for cream with fat between 35% and 40% (other stem models possible on request).
%
%
Schedule production: 300 liters continuous. Production of whipped cream and mousses with high overrun.Keeps the cream in perfect conditions preventing phase of separation.Consistent refrigeration from the container to the dispensing head.Allows interruption of production at anytime.Removable tank made of stainless steel, maintains easy and perfect hygiene.Standard: Labyrinth stem for cream with fat between 35% and 40% (other stem models possible on request).
%
Included: 3 grids GN 2/1 (530x650 mm).4 adjustable stainless steel feet.Refrigerant gas R290.Interior and exterior made of stainless steel (food grade) AISI 304 (rear galvanized steel), monocoque frameStainless steel racks and slides (antitilt), allowing the grids to be positioned as desired, deep-drawn inner bottom and rounded corners and angles (without rough edges)Doors with ergonomic (not protruding) and reversible handle, closing by "triple chamber" and magnetic seal (easy replacement,...
%
Production per hour: 20 Lit/h.Chassis in stainless steel and "aluminium alloy".Disk and filter basket in stainless steel and nylon, all the parts in contact with the food are removable. easy cleaning.Orifice 65 mm x 40 mm, pusher in PVC.Ventilated motor, 3000/6000 Turns/Minutes. Thermico.Waste collector basket (Ø180 mm, h= 270 mm).Switch On/Off, micro-switch security device.The equipment is manufactured following the (CE) standards in force
%
Included: 10 trays GN 1/1-h100 mm in polycarbonate.Evaporator at copper coil (lateral), hidden by a perforated stainless steel deflector.Manual defrosting, with water collecting tray.Bottom fitted with draining tap.4 adjustable stainless steel feet.Refrigerant gas R290. Interior and exterior made of stainless steel (food grade) AISI 304 (rear galvanized steel), monocoque frameStainless steel racks and slides (antitilt), allowing the grids to be positioned as desired, deep-drawn inner bottom...
%
%
- Luminous poster on the front side, with switch.2 service plugs (230/1N) inside the cabinet.Sneeze guard front glass in "tempered" glass, with one little service shelf made of stainless steel.Strenghtened work surface, with two openings to pass the cables of the devices, two openings on the back side of the cabinet too.Strenghtened intermediary shelf.Sliding doors, built in handles, standard delivered with key locks.Put on 4 castors, 2 with brakes.Manufactured in stainless steel 18/10 AISI...
%
Profile frame in aluminium.Panels with isolated double wall.Lateral inspection.Ventilator with direct suction.3 double filtering.
%
Profile frame in aluminium.Panels with isolated double wall.Lateral inspection.Ventilator with direct suction.3 double filtering.
%
Included: 20 pairs of slides (600x800 mm) by door.4 adjustable stainless steel feet.Cooling gas R290.Manufactured in stainless steel, inside and outside in AISI 304 (back in galvanized steel), monocoque frame.Stainless steel rack and slides (anti-tilting), allowing to place the grids as one pleases, stamped interior bottom, rounded angles and corners (without roughness).Doors with ergonomic handle (no salient) and reversible, closed by magnetic seal with "3 compartments" (easy replacement...
%
Included: 20 pairs of slides (400x600 mm) by door.4 adjustable stainless steel feet.Cooling gas R290.Manufactured in stainless steel AISI 304, inside and outside (back in galvanized steel), monocoque frame.Stainless steel racks and slides (anti-tilting), allowing to place the plates as one pleases, stamped interior bottom, rounded angles and corners (without roughness).Doors with ergonomic handle (no salient) and reversible, closed by magnetic seal with "3 compartments" (easy replacement...
%
Included: 20 pairs of slides (600x800 mm) by door.4 adjustable stainless steel feet.Cooling gas R290.Manufactured in stainless steel AISI 304, inside and outside (back in galvanized steel), monocoque frame.Stainless steel racks and slides (anti-tilting), allowing to place the plates as one pleases, stamped interior bottom, rounded angles and corners (without roughness).Doors with ergonomic handle (no salient) and reversible, closed by magnetic seal with "3 compartments" (easy replacement...
%
Self-lubricating, endless screw in oil-bath gear drive.Gravity-feed 35° inclination (a blade extractor comes standard).Max. cutting capacity 270xh230 (Ø 255 mm), slice thickness 0-30 mm.50 mm gap between blade and body. Elegant and efficient, made of anodized and polished aluminium alloy melting.Hardened, chrome-plated and rectified steel blade, fixed protection ring and blade cover with microswitch (100% safe).Reinforced stop, protection of the stop slide, removable.Carriage on stainless...
%
Capacity 40 GN 2/1 levels (or 80x GN 1/1).SPECIAL BANQUETING: Standard 20 grids to optimize space inside the trollley.Up to eight (8) plates with a diameter of 300 mm can be stored per level, for a total of 160 plates. Construction in austenitic stainless steel (food).Walls and door made of double injected prey (high density CFC-free polyurethane).Door opening at 120°, with vertical latch and key lock, with a seal in the door frame, easily replaceable without tools.Hinges with stop at 100°,...
%