%
Stainless steel tank and drum AISI 304.Steel base (epoxy paint).Mechanic timer from 0 to 15 minutes.Delivered with bolts for the ground anchor.
%
%
%
Schedule production: 150 liters. Production of whipped cream and mousses with high overrun.Keeps the cream in perfect conditions preventing phase of separation.Consistent refrigeration from the container to the dispensing head.Allows interruption of production at anytime.Removable tank made of stainless steel, maintains easy and perfect hygiene.Standard: Labyrinth stem for cream with fat between 35% and 40% (other stem models possible on request).
%
Schedule production: 300 liters continuous. Production of whipped cream and mousses with high overrun.Keeps the cream in perfect conditions preventing phase of separation.Consistent refrigeration from the container to the dispensing head.Allows interruption of production at anytime.Removable tank made of stainless steel, maintains easy and perfect hygiene.Standard: Labyrinth stem for cream with fat between 35% and 40% (other stem models possible on request).
%
%
Included: 3 grids GN 2/1 (530x650 mm).4 adjustable stainless steel feet.Refrigerant gas R290.Interior and exterior made of stainless steel (food grade) AISI 304 (rear galvanized steel), monocoque frameStainless steel racks and slides (antitilt), allowing the grids to be positioned as desired, deep-drawn inner bottom and rounded corners and angles (without rough edges)Doors with ergonomic (not protruding) and reversible handle, closing by "triple chamber" and magnetic seal (easy replacement,...
%
Production per hour: 20 Lit/h.Chassis in stainless steel and "aluminium alloy".Disk and filter basket in stainless steel and nylon, all the parts in contact with the food are removable. easy cleaning.Orifice 65 mm x 40 mm, pusher in PVC.Ventilated motor, 3000/6000 Turns/Minutes. Thermico.Waste collector basket (Ø180 mm, h= 270 mm).Switch On/Off, micro-switch security device.The equipment is manufactured following the (CE) standards in force
%
Included: 10 trays GN 1/1-h100 mm in polycarbonate.Evaporator at copper coil (lateral), hidden by a perforated stainless steel deflector.Manual defrosting, with water collecting tray.Bottom fitted with draining tap.4 adjustable stainless steel feet.Refrigerant gas R290. Interior and exterior made of stainless steel (food grade) AISI 304 (rear galvanized steel), monocoque frameStainless steel racks and slides (antitilt), allowing the grids to be positioned as desired, deep-drawn inner bottom...
%
- Air condenser.- Vertical turbine with automatic extraction. - Minimum mixing capacity 2 litres and maximum 4 litres. - Noise level below 70 dB. - Vertical evaporator cylinders for a larger exchange surface. - Cycle with time control or temperature control. - Exclusive distribution device. - System self diagnosis. - Cycle time: 10/15 min. - Hourly production: 20 litres. NB: mainly for cold work, delivered on wheels.
%
%
%
- Air condenser.- Vertical turbine with automatic extraction. - Minimum mixing capacity 2 litres and maximum 4 litres. - Noise level below 70 dB. - Vertical evaporator cylinders for a larger exchange surface. - Cycle with time control or temperature control. - Exclusive distribution device. - System self diagnosis. - Cycle time: 10/15 min. - Hourly production: 20 litres. NB: mainly for cold work, delivered on wheels.
%
- Luminous poster on the front side, with switch.2 service plugs (230/1N) inside the cabinet.Sneeze guard front glass in "tempered" glass, with one little service shelf made of stainless steel.Strenghtened work surface, with two openings to pass the cables of the devices, two openings on the back side of the cabinet too.Strenghtened intermediary shelf.Sliding doors, built in handles, standard delivered with key locks.Put on 4 castors, 2 with brakes.Manufactured in stainless steel 18/10 AISI...
%
Variable speed (Min. 65 rpm & Max. 551 rpm), with Inverter.Timer from 0 to 30 minutes or continuousStandard accessories: whisk, spatula, hook and 40 L stainless steel tank.High" versions on base.Very robust frame in painted steel (epoxy), upper cover in ABS, 4 lower cylinders for levellingRaising and lowering the tank with lever.Automatic locking of the tank in working position.Protection grid (and screws) in stainless steel, with safety device by microswitch.All parts in contact with the...
%
%
Flow: 7000 m³/h. (with reduced pressure of 300 Pa).1020 r/min.Internal ventilator with double ventilation trench with belt.Produced in galvanized steel,Frame in aluminium profiles.Side inspection possible for After Sales Service .Internal soundproof-isolationEquipped with flexible cuffs against congestion and anti-vibration pads.Motor with 2 closed speeds, degree of protection: IP54 (max. temperature 80°C).
%
Flow rate 7000 m³/H (pressure drop of 300 Pa).1020 rev/min.Internal fan double inlet transmission belt.Galvanized steel execution.Setting in aluminim profile.Indoor sound insulation.Lateral Inspection for S.A.V.Equipped with flexible sleeve to repression and anti-vibration pads.Motor 2 speeds closed, degree of protection IP54 (max temperature 80 ° C.).
%
Profile frame in aluminium.Panels with isolated double wall.Lateral inspection.Ventilator with direct suction.3 double filtering.
%
Profile frame in aluminium.Panels with isolated double wall.Lateral inspection.Ventilator with direct suction.3 double filtering.
%
%
%
Profile frame in aluminium.Panels with isolated double wall.Lateral inspection.Ventilator with belt drive, 2 speed levels.3 double filtering.
%
Profile frame in aluminium.Panels with isolated double wall.Lateral inspection.Ventilator with belt drive, 2 speed levels.3 double filtering.