%
Plate holder in stainless steelPlate: mix of steel who guarantees a maximum of heat accumulation(15 min. heating gives 45 min. of dispensing). Athermic gripFlexibility : plate surface 270x150mmElectrical heating by armoured elements treated incoloy.Thermostatic regulation from 0 to 90°C.
%
3 speeds (1st Speed 77 rpm and 2nd Speed 154 rpm and 3rd Speed 308 rpm).Timer from 0 to 30 minutes or continuousStandard accessories: whisk, spatula, hook and 40 L stainless steel tank.High" versions on base.Very robust frame in painted steel (epoxy), upper cover in ABS, 4 lower cylinders for levellingRaising and lowering the tank with lever.Automatic locking of the tank in working position.Protection grid (and screws) in stainless steel, with safety device by microswitch.All parts in contact...
%
Height of plates load Ø 390 mm (height glasses 355 mm).From 30 to 20 baskets/hour, PLD cycles 120", 150", continuous and " Sanitisation".3 phases: wash, unload, rinse.Standard discharge pump.Standard rinse pump (atmospheric boiler). Realization: fully manufactured in stainless steel AISI 304. Rotating wash and rinse arm (composite). Tank's filter (composite) (15 lt - 1,4 kW). Moulded polypropylene wash chamber, with external pipes. Pump filter in polypropylene. Wash pump (double flux) 0,63 Hp...
%
Built-in continuous water softener (ATTENTION: cold water connection).Plate loading height Ø 390mm (glass height 355 mm).From 30 to 20 baskets/hour, PLD cycles 120", 150", continuous and "Sanitisation".3 phases: washing, discharging, rinsing.Drain pump as standard.Standard rinsing pump (atmospheric boiler). Realization: fully manufactured in stainless steel AISI 304. Rotating wash and rinse arm (composite). Tank's filter (composite) (15 lt - 1,4 kW). Moulded polypropylene wash chamber, with...
%
%
Superior top 1.5 mm, rounded edges 70 mm.Pressed tank GN200 mm, corners rounded, drainage and overflow.Water level in the basin controlled by electro valve.Electric heating by element sited under tank.Ventilated cupboard, heated by electric element.Made in stainless steel with adjustable feet in stainless steel 150 mm.
%
4 plates, 2x 2,6 kW Ø220mm and 2x 1,5 kW Ø145mm, 6 position regulation. Cast iron plates, regulation by 6 positions switch.Neutral GN 2/1 cabinet (optional doors).NB: heating kit, optional.
%
2 heating zones (28x150xh180mm). Supplied as standard with 2 tongs.High-performance heating elements and low energy consumption.Selector for various types of cooking, sandwiches, toasted sandwiches, toasted sandwiches, waffles, etc.... (Maximum thickness 20 mm).Timer (0-15min) with heating indicator light. Built-in crumb collection drawer for easy maintenance.All stainless steel construction. Rubber feet.
%
Capacity 10 GN 1/1 (or) 10 x 600x400 mm (optional grids and plates).Production by cycle: 30 Kg ( +70° C +3° C) and 20 Kg ( +70° C -18° C) .Core probe serial."Anti-swinging" structure in stainless steel wire (removable), space for plates 65 mm.Reversible door, built-in handle (not salient).Compressor group placed on "removable" slides, easy cleaning and maintenance.4 adjustable stainless steel feet.Programmable electronic regulator (in closed waterproof box), with preservation function at the...
%
4 hobs, (2x 1.5 kW Ø 150 mm and 2x de 2.6 kW Ø 220 mm). Made of AISI 304 stainless steel, adjustable stainless steel cylinders.Pressed and sealed top (15/10 mm) in AISI 304 stainless steel.Rear chimney in AISI 304 stainless steel.Cast iron plates, with stainless steel sealing edge, safety device in case of overheating.Heating power regulation by means of a 7-position switch, front access for easy maintenance.
%
Production 22kg/24 h., capacity reserve 9 kg. "Palettes" system, particularly suitable for the hardest water conditions or bad quality water (algae, mud).Hollow ice cubes 20 g, ø 30 mm, h 25 mm.Ice cubes per cycle (15).Evaporator made of treaty cooper, dump ice cubes by reverse cycle "hot gas".No thermostat in the tank "too full", automatic interruption of the cycle, (the production stops when empty all the ice cubes stored in reserve).Inwardly sliding door, easy access ensuring strength and...
%
Temperature -1° +6°Refrigerant R600aVentilated Evaporator, Roll bond typeAutomatic defrost, auto-evaporation of condenser waterDelivered with 3 grids (very robust) GN 2/1 (651x510 mm), adjustable as well as the bottom grid (651x280 mm).Exterior manufactured in stainless steel 430, white interior in molded ABSGlass door (Thermopane, reversible), with aluminium frame, with magnetic seal closure (by pressure), easy changing without tools, very strong handleLED inner light- key lock door,...
%
Monoblock unit, climate class 4 (30°C Temperature & 55% Humidity), equipped with 2 side handles (easily removable), ventilated condenser.Ventilated evaporator treated against the salt and the food acids.Refrigerant gas R455a.Programmable electronic regulator, display on front with blue LED.Automatic defrosting by reversal of cycle (programmable as one pleases), automatic evaporation of the condensate.Appliances are complied with the CE in force.
%
Sides in ABS thermoformed, front and back in plastic sheet.Tempered glass.Exhibition in stainless steel AISI 304, depth 860 mm.Worktablet of granite, type "BLACK ABSOLUTE".Ventilated evaporator "air force" treated against food acids "coating" (device adjustable speed of the fans).Built-in compressor unit, climate class 3 (+25°C & RH 60%).Refrigerant R290.Control panel with electronic controller (digital display), fan speed controller.Digital thermometer in the exposure.Automatic defrost...
%
Sides in ABS thermoformed, front and back in plastic sheet.Tempered glass.Exhibition in stainless steel AISI 304, depth 860 mm.Worktablet of granite, type "BLACK ABSOLUTE".Ventilated evaporator "air force" treated against food acids "coating" (device adjustable speed of the fans).Built-in compressor unit, climate class 3 (+25°C & RH 60%).Refrigerant R290.Control panel with electronic controller (digital display), fan speed controller.Digital thermometer in the exposure.Automatic defrost...