%
10 tubs (360x165xh120 mm).Reserve compartment 12 tubs (360x165xh120 mm).Straight window.Internal lighting, wheeled chassisSliding transparent cover.Thermostat control.Tank with rounded corners and edges.Built-in compressor unit (ambient T° +32° 55%RH)Refrigerant gas R290NB: Delivered without trays. Straight glass panels. Transparent sliding cover.Exterior manufactured in "white" plastified steel plate, uni-directional castors.Insulation (70 mm) in polyurethane without CFC.Basin with rounded...
%
Tank GN 1/3, delivered with 6 specific baskets, numbered.Thermal lateral handles and stainless steel lid.Heatng resistance, except for tank (standard bain-marie).On/Off switch and thermostat from 0 to 100°C, with limiting device.
%
%
- Air condenser.- Vertical turbine with automatic extraction, low maintenance and very easy to use.- Easy installation due to its compact size.- Minimum mixing capacity 1 liter and maximum 2 liters.- Noise level below 70 dB.- Cycle with time control or with temperature control.- Vertical cylinders-evaporators for a bigger surface of exchange.- Exclusive dispensing device.- Auto diagnostic system.- Cycle time: 10/20 min.- Hourly production: 12 liters.NB: mainly for cold work.
%
- Air condenser.- Vertical turbine with automatic extraction, low maintenance and very easy to use.- Easy installation due to its compact size.- Minimum mixing capacity 1 liter and maximum 2 liters.- Noise level below 70 dB.- Cycle with time control or with temperature control.- Vertical cylinders-evaporators for a bigger surface of exchange.- Exclusive dispensing device.- Auto diagnostic system.- Cycle time: 10/20 min.- Hourly production: 12 liters.NB: mainly for cold work.
%
Cooling capacity rendered 1960 (W/f) for chamber volume 16,4 m³ / 16400 Lit. (T° internal 0° C & T° external +32° C).Refrigerant expansion by capillary. "Overlapping" refrigeration units.Unit certified in climatic class 5 (40°C Temperature - 40% Humidity).All units are supplied as standard with a high pressure switch and KVL valve.Automatic hot gas defrost with self-evaporation and overflow.The evaporator drain pipe is equipped with a resistor to prevent ice formation. Refrigerant gas...
%
Superior top 1.5 mm, rounded edge.Ventilated refrigeration with uniform airflows in order to guarantee a homogenous distribution of the cold, even on the shelves of the display, thanks to its particular system of the cold canalization.Pressed basin GN-150 mm, rounded corners, drainage.Display with 3 shelves, opened on customer side.Made in stainless steel AISI 304.Built in hermetic unit.Refrigerant gas R290.
%
Superior top 1.5 mm, rounded edge, pressed 20 mm deep for dimensions GN with rounded corners, drainage.Ventilated refrigeration with uniform airflows in order to guarantee a homogenous distribution of the cold, even on the shelves of the display, thanks to its particular system of the cold canalization.Display with 3 shelves, opened on customer side.Made in stainless steel AISI 304.Built in hermetic unit.Refrigerant gas R290.
%
Gravity-feed, 38° inclination (a blade extractor comes standard).Max. cutting capacity 270xh230 (Ø 255 mm), slice thickness: 0-30 mm.50 mm gap between blade and body. Stylish and performing, sanitary polished and anodized aluminium alloy, hardened, chromed stainless blade, permanent tapered blade ring guard and interlocked blade guard (100% safe).Reinforced gauge plate, removable slider guard.Carriage sliding on stainless bearings for an easy and quiet operation, polished, chromed and...
%
Superior top 1.5 mm, rounded edge.Ventilated refrigeration with uniform airflows in order to guarantee a homogenous distribution of the cold, even on the shelves of the display, thanks to its particular system of the cold canalization.Pressed basin GN-150 mm, rounded corners, drainage.Display with 3 shelves, opened on customer side.Made in stainless steel AISI 304.Built in hermetic unit.Refrigerant gas R290.
%
Superior top 1.5 mm, rounded edge, pressed 20 mm deep for dimensions GN with rounded corners, drainage.Ventilated refrigeration with uniform airflows in order to guarantee a homogenous distribution of the cold, even on the shelves of the display, thanks to its particular system of the cold canalization.Display with 3 shelves, opened on customer side.Made in stainless steel AISI 304.Built in hermetic unit.Refrigerant gas R290.
%
%
%
Stainless steel sheet structure, brushed finishing. Insulated withexpanded polyurethane panels.Insulated top lids opening outwards through 180° to form supportsurfaces, complete with edges to retain condensation.Pressed stainless steel basin without sharp edges, withthermostats, for GN containers up to 20 cm depth (not included).Heated with dry resistance elements underneath each basin.Insulated movement handles.Edge bumper strips in grey non-marking rubber.Castors diam. 16 cm, with two...
%
Structure en tôle d'acier inox, finition brossée. Isolés avec des panneaux de polyuréthane expansé.Des couvercles supérieurs ouvrables à 180°, pour former un plan de travail, dotés de bord de limitation de condensation.Bassins inox emboutis et dépourvus d'arêtes, avec thermomètre/ thermostats indépendants, pour récipients GN et profondeur 20 cm (non inclus).Chauffants avec éléments de résistance à sec sous chaque cuve.Compartiment neutre inférieur, fermé avec porte à charnière rabattable vers...
%
Superior top 1.5 mm, rounded edge.Ventilated refrigeration with uniform airflows in order to guarantee a homogenous distribution of the cold, even on the shelves of the display, thanks to its particular system of the cold canalization.Pressed basin GN-150 mm, rounded corners, drainage.Display with 3 shelves, sliding doors on service side, opened doors on customer side.Made in stainless steel AISI 304.Built in hermetic unit.Refrigerant gas R290.
%
Superior top 1.5 mm, rounded edge.Ventilated refrigeration with uniform airflows in order to guarantee a homogenous distribution of the cold, even on the shelves of the display, thanks to its particular system of the cold canalization.Pressed basin GN-150 mm, rounded corners, drainage.Display with 2 shelves, sliding doors on service side.Made in stainless steel AISI 304.Built in hermetic unit.Refrigerant gas R290.
%
7 liters Planetary mixerOn/Off switch, with variable speed. Planetary mixer, metal construction.Tilt-head allows for an easy receiving container removal, with microswitch, easy attachment replacement and easy cleaning.Removable stainless steel receiving container.3 metal attachments come standard (whip, hook and palette).self-lubricating gear transmission.24V, NVR (No-Voltage Release) to prevent accidental restart after power failure.Machine complying with the current CE standards.
%
%
Superior top 1.5 mm, rounded edge, pressed 20 mm deep for dimensions GN with rounded corners, drainage.Ventilated refrigeration with uniform airflows in order to guarantee a homogenous distribution of the cold, even on the shelves of the display, thanks to its particular system of the cold canalization.Display with 3 shelves, sliding doors on service side and opened on customer side.Made in stainless steel AISI 304.Built in hermetic unit.Refrigerant gas R290.
%
Structure support AISI 304 for gastronome tray, maximum depth 150mm.Refrigerated display vat available only on ventilated showcase.Bain-marie and dry heat display vat available only on neutral display case.NB: It is recommended not to put an intermediate shelf.
%
Superior top 1.5 mm, rounded edge, pressed 20 mm deep for dimensions GN with rounded corners, drainage.Ventilated refrigeration with uniform airflows in order to guarantee a homogenous distribution of the cold, even on the shelves of the display, thanks to its particular system of the cold canalization.Display with 3 shelves, sliding doors on service side.Made in stainless steel AISI 304.Built in hermetic unit.Refrigerant gas R290.
%
3 adjustable levels, grids 670x433 mm (2 grids standard delivery).Internal dimensions 750x460xh360 mm.4 sides and top in glass, panoramic display. Service side, opening glass doors to 180°.Lightining type LED on each price.
%
Entièrement réalisé en acier inoxydable.De base, elle permet le pétrissage de la pâte (capacité de cuve: 6 kg de farine), ainsi que la production en automatique de pâtes "de blé dur" (production 15/18 kg/h).Couteau pour la coupe automatique des pâtes courtes ou longues.Dispositif variateur des vitesses standard.Livré avec 4 matrices:n° 7 (1,5 mm) pour tagliolini,n° 28 (6 mm) pour tagliatelle,n° 89 (10 mm) pour macaroni,spoglia 2x85 mm feuille de pâtes.La machine est conforme aux normes "CE"...