%
Stainless steel interior and exterior construction.Hourly production: 25 litres/hour.Tank capacity: 10 litres.Automatic filling, direct connection to the water network (with an overflow device).Temperature electronically adjustable by THERMOPID (80 - 98ºC).Tank with double probe to avoid dry heatingWith service valve, athermicLower shelf with removable upper grid, all made of stainless steel, easy to maintainMain switch On/Off, with indicator lightElectric resistance heatingAutomatic water...
%
%
%
Variable speed (Min. 65 rpm & Max. 551 rpm), with Inverter.Timer from 0 to 30 minutes or continuousStandard accessories: whisk, spatula, hook and 60 L stainless steel tank.High" versions on base.Very robust frame in painted steel (epoxy), upper cover in ABS, 4 lower cylinders for levellingRaising and lowering the tank with lever.Automatic locking of the tank in working position.Protection grid (and screws) in stainless steel, with safety device by microswitch.All parts in contact with the...
%
%
Profile frame in aluminium.Panels with isolated double wall.Lateral inspection.Ventilator with belt drive, 2 speed levels.3 double filtering.
%
Profile frame in aluminium.Panels with isolated double wall.Lateral inspection.Ventilator with belt drive, 2 speed levels.3 double filtering.
%
Profile frame in aluminium.Panels with isolated double wall.Lateral inspection.Ventilator with belt drive, 2 speed levels.3 double filtering.
%
Superior top 1.5 mm, rounded edges."Pressed" tank GN-200 mm, corners rounded, drainage and overflow.Filling tank by electro-valve.Electric heating by element sited under the tank.Made in stainless steel AISI 304.Attention: plan an evacuation to the network.
%
%
Top 1,5 mm, rounded edge.Deep-drawn tank GN-200 mm, rounded corners, discharge and overflow.Filling of the tank by electrovalve.Electric heating by resistances located under the tank.Made of stainless steel AISI 304.Caution : Provide for a drain to the network.
%
2 Speeds (Spiral : 1st speed 100 rpm. and 2nd speed 200rpm) & (Tank : 1st speed 10rpm. and 2nd speed 20rpm) with possibility of automatic or manual programming with timer or continuous.Diameter of the spiral 22 mm.Diameter of the tank 452 mm height 260 mm (42 liters) = 38 kg dough.Digital control panel (manual or automatic operation).Structure made of painted steel.Rotating cockpit (not removable) in stainless steel AISI 304.High hardness steel spiral, stainless steel divider AISI...
%
- 2 Speeds (Spiral : 1st speed 100 rpm. and 2nd speed 200rpm) & (Tank : 1st speed 10rpm. and 2nd speed 20rpm) with possibility of automatic or manual programming with timer or continuous. - Diameter of the spiral 22 mm. - Diameter of the tank 452 mm height 260 mm (42 liters) = 38 kg dough.- Digital control panel (manual or automatic operation). - Structure made of painted steel. - Rotating cockpit (not removable) in stainless steel AISI 304. - High hardness steel spiral, stainless steel...
%
2 Speeds (Spiral : 1st speed 100 rpm and 2nd speed 200rpm) & (Tank : 1st speed 10rpm and 2nd speed 20rpm) with possibility of automatic or manual programming with timer or continuous.Diameter of the spiral 24 mm.Diameter of the tank 500 mm height 270 mm (53 liters) = 44 kg dough.Digital control panel (manual or automatic operation).Structure made of painted steel.Rotating cockpit (not removable) in stainless steel AISI 304.High hardness steel spiral, stainless steel divider AISI 304.Grid...
%
- 2 Speeds (Spiral : 1st speed 100 rpm and 2nd speed 200rpm) & (Tank : 1st speed 10rpm and 2nd speed 20rpm) with possibility of automatic or manual programming with timer or continuous. - Diameter of the spiral 24 mm. - Diameter of the tank 500 mm height 270 mm (53 liters) = 44 kg dough.- Digital control panel (manual or automatic operation). - Structure made of painted steel. - Rotating cockpit (not removable) in stainless steel AISI 304. - High hardness steel spiral, stainless steel...
%
%
Production capacity 40 kg (80 Lt)Flour capacity 25 kg2 speeds, automatically adjustable (Spiral: 1st Speed 112 rpm and 2nd Speed 224 rpm) & (Tank: 1st Speed 14 rpm and 2nd Speed 28 rpm)2 electronic timers, for the automatic management of each speed.Tank Ø 530xh320 mm Control panel, low voltage 24V. (IP55).Motor with pulley transmissions.Emergency stop button type "punch".Frame in epoxy painted steel, very thick.Spiral tank, tool shaft and dividing share are made of thick AISI 304...
%
Production capacity 60 kg (100 Lt)Flour capacity 35 kg2 speeds, automatically adjustable (Spiral: 1st Speed 112 rpm and 2nd Speed 224 rpm) & (Tank: 1st Speed 14 rpm and 2nd Speed 28 rpm)2 electronic timers, for the automatic management of each speed.Tank Ø 580xh360 mm Control panel, low voltage 24V. (IP55).Motor with pulley transmissions.Emergency stop button type "punch".Frame in epoxy painted steel, very thick.Spiral tank, tool shaft and dividing share are made of thick AISI 304...
%
Production capacity 60 kg (100 Lt)Flour capacity 40 kg2 speeds, automatically adjustable (Spiral: 1st Speed 98 rpm and 2nd Speed 198 rpm) & (Tank: 21 rpm)2 electronic timers, for the automatic management of each speed.2 independent motors, one for the tank and one for the spiralDevice for pulse rotation of the tank and reversal of the direction of rotation of the tank.Tank Ø 600xh360 mm Control panel, low voltage 24 V. (IP55).Motors with pulley transmissions.Emergency stop button type...
%
Structure support AISI 304 for gastronome tray, maximum depth 150mm.Refrigerated display vat available only on ventilated showcase.Bain-marie and dry heat display vat available only on neutral display case.NB: It is recommended not to put an intermediate shelf.
%
Structure support AISI 304 for gastronome tray, maximum depth 150mm.Refrigerated display vat available only on ventilated showcase.Bain-marie and dry heat display vat available only on neutral display case.NB: It is recommended not to put an intermediate shelf.
%
%
Supplied as standard with 1 stainless steel plate and 1 grid 460x340 (433x333 mm grids or plates can also be supplied). Chamber with rounded corners, in AISI 430 stainless steel, outside in AISI 430 stainless steel.Distance between boards 70 mm.Pipe for the evacuation of the condensate.T° from 50°C to 270°C, 2 motors with fans (2600 rpm), internal lighting.Folding door with double glazing, stainless steel handle, gasket on the counter door "easily removable", removable inner glass for easy...
%
Capacity 5x GN 1/1Recessed dimensions 1740x585 Deep-drawn tank 190mm (GN-150 mm tanks), rounded corners and corners (perfect hygiene), discharge and overflow.1/2" tank filling valve and 3/4" drain valveElectric heating by resistors (silicone) located under the tank.Control panel with electronic regulation of +30° +90°, digital displayPossibility of placing the control panel on the side or in frontHigh thickness insulation reduces heat loss and energy consumptionPredisposed for the placement...